Abstract:Fusion energy is widely considered as the most promising method to solve the energy crisis, while the blanket is of vital importance in the fusion device due to its main function of thermal extraction and energy conversion. The high heat flux from plasma and the internal nuclear heat deposition are imposed on fusion blanket. Slice model or two-dimensional model is usually adopted for traditional design of fusion blanket, in which most side effects are neglected, introducing relatively large uncertainty for thermal removal capability of the blanket. In this study, the integral three-dimensional full-scale model is established based on the split-zone method for mesh generation. Based on the validated numerical method, the preliminary thermal-hydraulic analysis of the fullscale model shows that inadequate heat transfer and significant flow distribution difference are encountered for the initial blanket design, in which the full-scale effect is not considered. After that, the specific structure modifications are proposed for different blanket components to solve the abovementioned problems. The maximum temperature of first wall is reduced from 671 & DEG;C to 639 & DEG;C, which is under the material temperature limit of 650 & DEG;C; the inverse V-shaped flow distribution in the cap is modified as more even flow in cap channels; the maximum temperature of the function zone in blanket is reduced from 999 & DEG;C to 759 & DEG;C, which is an important structure modification for the blanket. The integral three-dimensional full-scale thermal-hydraulic analysis is performed after the local structure modification. The results show that the function zone is cooled down obviously by the coolant in the side wall. Compared to the temperature limit of 900 & DEG;C for lithium orthosilicate, there is a more rigorous limit for the beryllium material, since they share the common cooling capability layer by layer while the temperature limit for the latter is only 650 & DEG;C. The three-dimensional full-scale thermal-hydraulic analysis in our research is valuable to evaluate the integral reliability of the fusion blanket.

ITER blanket engineering challenges and solutions

The ITER blanket system design challenge

Design Evolution and Integration of the ITER In-Vessel Components

Electromagnetic analyses and optimization for slit configuration of ITER blanket shield block

Engineering challenges and development of the ITER Blanket System and Divertor

Numerical Analyses of Electromagnetic Forces on the ITER Blanket Module Shield Block During Major Disruptions

Engineering design of the ITER blanket and relevant research and development results

Analysis and Optimization of Cooling Channels in ITER Blanket Module

Overview of the design and R&D of the ITER blanket system

Interface design of the blanket system for CFETR

ITER-FEAT vacuum vessel and blanket design features and implications for the R&D programme

Development of Advanced Blanket Performance under Irradiation and System Integration Through JUPITER-II Project

Design and R&D progress of blanket attachments

Structure Optimization of Helium-Cooled Blanket for Fusion Reactor Based on Three-Dimensional Full-Scale Thermal-Hydraulic Analysis

ITER blanket manifold final design and validation

Progress on design and R&D of ITER FW/blanket

ARIES-I SiC Composite Low Activation Blanket Design

FW and Blanket Technology Development Progress at SWIP

Blanket and shield design for a noncircular Tokamak experimental power reactor

ITER first wall/shield blanket

Preliminary Design of A Solid Particulate Cooled Blanket for the Steady-State Tokamak Reactor (Sstr)