Rigidity Theorems for Compact Manifolds with Boundary and Positive Ricci Curvature

Fengbo Hang,Xiaodong Wang

DOI: https://doi.org/10.48550/arXiv.0911.0380

2009-11-02

Differential Geometry

Abstract:We prove some boundary rigidity results for the hemisphere under a lower bound for Ricci curvature. The main result can be viewed as the Ricci version of a conjecture of Min-Oo.

What problem does this paper attempt to address?

Some Rigidity Properties for Manifolds with Constant K-Curvature of Modified Schouten Tensor

Leyang Bo,Weimin Sheng

DOI: https://doi.org/10.1007/s12220-018-0097-0

2018-01-01

Journal of Geometric Analysis

Abstract:In this paper, we study the rigidity problem on closed locally conformally flat manifolds with constant k-curvature or constant quotient curvature. We prove that such manifolds must have constant sectional curvature under the assumption that the manifolds have positive sectional curvature. The same result is also held on closed locally conformally flat manifolds with totally geodesic boundary.
Prescribing Curvature Problems on the Bakry-Emery Ricci Tensor of a Compact Manifold with Boundary

Weimin Sheng,Lixia Yuan

DOI: https://doi.org/10.1007/s11401-013-0809-5

2014-01-01

Abstract:The authors consider the problem of conformally deforming a metric such that the k-curvature defined by an elementary symmetric function of the eigenvalues of the Bakry-Emery Ricci tensor on a compact manifold with boundary to a prescribed function. A consequence of our main result is that there exists a complete metric such that the Monge-Ampère type equation with respect to its Bakry-Emery Ricci tensor is solvable, provided that the initial Bakry-Emery Ricci tensor belongs to a negative convex cone.
A Rigidity Theorem for the Hemisphere

Fengbo Hang,Xiaodong Wang

DOI: https://doi.org/10.48550/arXiv.0711.4595

2007-11-28

Differential Geometry

Abstract:We prove the following rigidity theorem: For an n-dimensional compact Riemannian manifold with boundary whose Ricci curvature is bounded by n-1 from below, if its boundary is isometric to the standard sphere of dimension n-1 and totally geodesic, then the manifold is isometric to the standard hemisphere.
On Yau Rigidity Theorem for Submanifolds in Pinched Manifolds

Hong-Wei Xu,Li Lei,Juan-Ru Gu

DOI: https://doi.org/10.4310/pamq.2016.v12.n2.a6

2016-01-01

Pure and Applied Mathematics Quarterly

Abstract:In this paper, we investigate Yau's rigidity problem for compact submanifolds with parallel mean curvature in pinched Riemannian manifolds. Firstly, we prove that if M-n is an oriented closed minimal submanifold in an (n + p)-dimensional complete simply connected Riemannian manifold Nn(+p), then there exists a constant delta(0)(n, p) is an element of (0, 1) such that if the sectional curvature of N satisfies (K) over bar (N) is an element of[delta(0)(n, p), 1], and if M has a lower bound for the sectional curvature and an upper bound for the normalized scalar curvature, then N is isometric to Sn+p. Moreover, M is either a totally geodesic sphere, one of the Clifford minimal hypersurfaces S-k(root k/n) x S-n (k)(root n-k/n) in Sn+1 for k = 1,..., n-1, or the Veronese submanifold in Sn+d, where d = 1/2n(n + 1) - 1. We then generalize the above theorem to the case where M ia a compact submanifold with parallel mean curvature in a pinched Riemannian manifold.
Generalized Ejiri’s Rigidity Theorem for Submanifolds in Pinched Manifolds

Hongwei Xu,Li Lei,Juanru Gu

DOI: https://doi.org/10.1007/s11401-020-0199-4

2020-01-01

Abstract:Let Mn(n ≥ 4) be an oriented compact submanifold with parallel mean curvature in an (n + p)-dimensional complete simply connected Riemannian manifold Nn+p. Then there exists a constant δ(n, p) 2 (0, 1) such that if the sectional curvature of N satisfies $${\overline K _N} \in \;\,\left[ {\delta \left( {n,p} \right),\;1} \right]$$, and if M has a lower bound for Ricci curvature and an upper bound for scalar curvature, then N is isometric to Sn+p. Moreover, M is either a totally umbilic sphere $${S^n}({1 \over {\sqrt {1 + {H^2}} }})$$, a Clifford hypersurface $${S^m}({1 \over {\sqrt {2(1 + {H^2})} }})\; \times \;{S^m}({1 \over {\sqrt {2(1 + {H^2})} }})$$ in the totally umbilic sphere $${S^{n+1}}({1 \over {\sqrt {1 + {H^2}} }})$$ with n = 2m, or $${\mathbb{C}{\rm{P}}^2}\left( {{4 \over 3}\left( {1 + {H^2}} \right)} \right)$$ in $${S^7}({1 \over {\sqrt {1 + {H^2}} }})$$. This is a generalization of Ejiri’s rigidity theorem.
Rigidity Theorems for Diameter Estimates of Compact Manifold with Boundary

Haizhong Li,Yong Wei

DOI: https://doi.org/10.1093/imrn/rnu052

2014-01-01

International Mathematics Research Notices

Abstract:Let (N, g) be an n-dimensional complete Riemannian manifold with nonempty boundary partial derivative N. Assume that the Ricci curvature of (N, g) has a negative lower bound Ric >= -(n-1)c(2) for some c> 0, and the mean curvature of the boundary partial derivative N satisfies H = -(n-1) c(0) > (n-1)c for some c(0) > c > 0. Then a known result (cf. [12]) says that sup(x is an element of N) d(x, partial derivative N) <= 1/c coth(-1) c(0)/c. In this paper, we prove the rigidity result that if N is compact, then the equality holds if and only if (N, g) is isometric to the geodesic ball of radius 1/c coth(-1) c(0)/c in an n-dimensional hyperbolic space H-n(-c(2)) of constant sectional curvature -c(2). Moreover, we prove an analogous result for manifold with m-Bakry- Emery Ricci curvature bounded below by a negative constant.
Rigidity Theorems on Odd Dimensional Manifolds

Kefeng Liu,Yong Wang

DOI: https://doi.org/10.4310/pamq.2009.v5.n3.a7

2009-01-01

Pure and Applied Mathematics Quarterly

Abstract:We prove several rigidity theorems for elliptic genera associated to Toeplitz operators on odd dimensional spin manifolds. We also prove an equivariant odd index theorem for Dirac operators with involution parity and the Atiyah-Hirzebruch vanishing theorems for odd dimensional spin manifolds.
On Intrinsic Rigidity for Minimal Submanifolds in A Sphere

YB SHEN

DOI: https://doi.org/10.1360/ya1989-32-7-769

1989-01-01

Abstract:In this paper, some intrinsic rigidity theorems are given for compact minimal submanifolds in a sphere. In particular, the pinching constant of J. Simons is improved for higher codimensions.
Scalar-mean rigidity theorem for compact manifolds with boundary

Jinmin Wang,Zhichao Wang,Bo Zhu

2024-10-09

Abstract:We prove a scalar-mean rigidity theorem for compact Riemannian manifolds with boundary in dimension less than five by extending Schoen-Yau dimension reduction argument. As a corollary, we prove the sharp spherical radius rigidity theorem and best NNSC fill-in in terms of the mean curvature. Additionally, we prove a (Lipschitz) Listing type scalar-mean comparison rigidity theorem for these dimensions. Our results remove the spin assumption.

Differential Geometry
Rigidity theorems on hemispheres in non-positive space forms

Lan-Hsuan Huang,Damin Wu

DOI: https://doi.org/10.48550/arXiv.0907.5549

2010-10-18

Abstract:We study the curvature condition which uniquely characterizes the hemisphere. In particular, we prove the Min-Oo conjecture for hypersurfaces in Euclidean space and hyperbolic space.

Differential Geometry,Analysis of PDEs
Rigidity Results for Compact Submanifolds with Pinched Ricci Curvature in Euclidean and Spherical Space Forms

Jianquan Ge,Ya Tao,Yi Zhou

2024-11-21

Abstract:For compact submanifolds in Euclidean and Spherical space forms with Ricci curvature bounded below by a function $\alpha(n,k,H,c)$ of mean curvature, we prove that the submanifold is either isometric to the Einstein Clifford torus, or a topological sphere for the maximal bound $\alpha(n,[\frac{n}{2}],H,c)$, or has up to $k$-th homology groups vanishing. This gives an almost complete (except for the differentiable sphere theorem) characterization of compact submanifolds with pinched Ricci curvature, generalizing celebrated rigidity results obtained by Ejiri, Xu-Tian, Xu-Gu, Xu-Leng-Gu, Vlachos, Dajczer-Vlachos.

Differential Geometry
Rigidity for inscribed radius estimate of asymptotically hyperbolic Einstein manifold

Xiaoshang Jin

DOI: https://doi.org/10.1090/proc/16955

IF: 0.9709

2024-10-10

Proceedings of the American Mathematical Society

Abstract:The inscribed radius of a compact manifold with boundary is bounded above if its Ricci curvature and mean curvature are bounded from below. The rigidity result implies that the upper bound can be achieved only in space form. In this paper, we generalize this result to asymptotically hyperbolic (AH) Einstein manifold. We get an upper bound of the relative volume of AH manifold and if we combine it with the recent work of Wang and Zhou, then the rigidity is obtained.

mathematics, applied
On Compact Riemannian Manifolds with Convex Boundary and Ricci Curvature Bounded from Below

Xiaodong Wang

DOI: https://doi.org/10.1007/s12220-020-00422-1

2020-05-22

Abstract:We propose to study positive harmonic functions satisfying a nonlinear Neuman condition on a compact Riemannian manifold with nonnegative Ricci curvature and strictly convex boundary. A precise conjecture is formulated. We discuss its implications and present some partial results. Related questions are discussed for compact Riemannian manifolds with positive Ricci curvature and convex boundary.
Ricci and Scalar Curvature Rigidity of the Hemisphere

Fengbo Hang,Xiaodong Wang

DOI: https://doi.org/10.48550/arXiv.0712.3297

2007-12-19

Differential Geometry

Abstract:We retract the scalar curvature rigidity theorem as there is a mistake in the proof. We thank S. Montiel for pointing out the mistake.
Conformally invariant rigidity theorems on four-manifolds with boundary

Siyi Zhang

DOI: https://doi.org/10.48550/arXiv.2009.05164

2020-09-11

Abstract:In the article we introduce new conformal and smooth invariants on compact, oriented four-manifolds with boundary. In the first part, we show that "positivity" conditions on these invariants will impose topological restrictions on underlying manifolds with boundary, which generalizes the results on closed four-manifolds by M. Gursky and on conformally compact Einstein four-manifolds by S.-Y. A. Chang, J. Qing, and P. Yang. In the second part, we study Weyl functional on four-manifolds with boundary and establish several conformally invariant rigidity theorems. As applications, we prove some rigidity theorems for conformally compact Einstein four-manifolds. These results generalize the work on closed four-manifolds by S.-Y. A. Chang, J. Qing, and P. Yang and rigidity theorem for conformally compact Einstein four-manifolds by G. Li, J. Qing, and Y. Shi. A crucial idea of the proofs is to understand the expansion of a smooth Riemannian metric near the boundary. It is noteworthy to point out that we rule out some examples arising from the study of closed manifolds in the setting of manifolds with umbilic boundary.

Differential Geometry,Analysis of PDEs
Rigidity for Einstein manifolds under bounded covering geometry

Cuifang Si,Shicheng Xu

2024-09-24

Abstract:In this note we prove three rigidity results for Einstein manifolds with bounded covering geometry. (1) An almost flat manifold $(M,g)$ must be flat if it is Einstein, i.e. $\operatorname{Ric}_g=\lambda g$ for some real number $\lambda$. (2) A compact Einstein manifolds with a non-vanishing and almost maximal volume entropy is hyperbolic. (3) A compact Einstein manifold admitting a uniform local rewinding almost maximal volume is isometric to a space form.

Differential Geometry
Extrinsic Bonnet-Myers Theorem and almost rigidity

Weiying Li,Guoyi Xu

2024-05-08

Abstract:We establish the extrinsic Bonnet-Myers Theorem for compact Riemannian manifolds with positive Ricci curvature. And we show the almost rigidity for compact hypersurfaces, which have positive sectional curvature and almost maximal extrinsic diameter in Euclidean space.

Differential Geometry,Metric Geometry
Rigidity theorems for compact Bach-flat manifolds with positive constant scalar curvature

Haiping Fu,Jianke Peng

DOI: https://doi.org/10.48550/arXiv.1707.07236

2017-07-23

Abstract:In this paper, we prove some rigidity theorems for compact Bach-flat $n$-manifold with the positive constant scalar curvature. In particular, our conditions in Theorem 1.4 have the additional properties of being sharp.

Differential Geometry
On a Rigidity Result in Positive Scalar Curvature Geometry

Puskar Mondal

2024-10-31

Abstract:I prove a scalar curvature rigidity theorem for spheres. In particular, I prove that geodesic balls of radii strictly less than $\frac{\pi}{2}$ in $n+1~(n\geq 2)$ dimensional unit sphere are rigid under smooth perturbations that increase scalar curvature preserving the intrinsic and extrinsic geometry of the boundary, and such rigidity result fails for the hemisphere. The proof of this assertion requires the notion of a real Killing connection and solution of the boundary value problem associated with its Dirac operator. The result serves as the sharpest refinement of the now-disproven Min-Oo conjecture.

Differential Geometry,General Relativity and Quantum Cosmology,Mathematical Physics
Boundary effect of Ricci curvature

Pengzi Miao,Xiaodong Wang

DOI: https://doi.org/10.4310/jdg/1460463563

2016-05-01

Journal of Differential Geometry

Abstract:On a compact Riemannian manifold with boundary, we study how Ricci curvature of the interior affects the geometry of the boundary. First, we establish integral inequalities for functions defined solely on the boundary and apply them to obtain geometric inequalities involving the total mean curvature. Then, we discuss related rigidity questions and prove Ricci curvature rigidity results for manifolds with boundary.

mathematics

Rigidity Theorems for Compact Manifolds with Boundary and Positive Ricci Curvature

Some Rigidity Properties for Manifolds with Constant K-Curvature of Modified Schouten Tensor

Prescribing Curvature Problems on the Bakry-Emery Ricci Tensor of a Compact Manifold with Boundary

A Rigidity Theorem for the Hemisphere

On Yau Rigidity Theorem for Submanifolds in Pinched Manifolds

Generalized Ejiri’s Rigidity Theorem for Submanifolds in Pinched Manifolds

Rigidity Theorems for Diameter Estimates of Compact Manifold with Boundary

Rigidity Theorems on Odd Dimensional Manifolds

On Intrinsic Rigidity for Minimal Submanifolds in A Sphere

Scalar-mean rigidity theorem for compact manifolds with boundary

Rigidity theorems on hemispheres in non-positive space forms

Rigidity Results for Compact Submanifolds with Pinched Ricci Curvature in Euclidean and Spherical Space Forms

Rigidity for inscribed radius estimate of asymptotically hyperbolic Einstein manifold

On Compact Riemannian Manifolds with Convex Boundary and Ricci Curvature Bounded from Below

Ricci and Scalar Curvature Rigidity of the Hemisphere

Conformally invariant rigidity theorems on four-manifolds with boundary

Rigidity for Einstein manifolds under bounded covering geometry

Extrinsic Bonnet-Myers Theorem and almost rigidity

Rigidity theorems for compact Bach-flat manifolds with positive constant scalar curvature

On a Rigidity Result in Positive Scalar Curvature Geometry

Boundary effect of Ricci curvature