Rigidity theorems for compact Bach-flat manifolds with positive constant scalar curvature

Haiping Fu,Jianke Peng

DOI: https://doi.org/10.48550/arXiv.1707.07236

2017-07-23

Abstract:In this paper, we prove some rigidity theorems for compact Bach-flat $n$-manifold with the positive constant scalar curvature. In particular, our conditions in Theorem 1.4 have the additional properties of being sharp.

Differential Geometry

What problem does this paper attempt to address?

Some Rigidity Properties for Manifolds with Constant K-Curvature of Modified Schouten Tensor

Leyang Bo,Weimin Sheng

DOI: https://doi.org/10.1007/s12220-018-0097-0

2018-01-01

Journal of Geometric Analysis

Abstract:In this paper, we study the rigidity problem on closed locally conformally flat manifolds with constant k-curvature or constant quotient curvature. We prove that such manifolds must have constant sectional curvature under the assumption that the manifolds have positive sectional curvature. The same result is also held on closed locally conformally flat manifolds with totally geodesic boundary.
Prescribing Curvature Problems on the Bakry-Emery Ricci Tensor of a Compact Manifold with Boundary

Weimin Sheng,Lixia Yuan

DOI: https://doi.org/10.1007/s11401-013-0809-5

2014-01-01

Abstract:The authors consider the problem of conformally deforming a metric such that the k-curvature defined by an elementary symmetric function of the eigenvalues of the Bakry-Emery Ricci tensor on a compact manifold with boundary to a prescribed function. A consequence of our main result is that there exists a complete metric such that the Monge-Ampère type equation with respect to its Bakry-Emery Ricci tensor is solvable, provided that the initial Bakry-Emery Ricci tensor belongs to a negative convex cone.
On Yau Rigidity Theorem for Submanifolds in Pinched Manifolds

Hong-Wei Xu,Li Lei,Juan-Ru Gu

DOI: https://doi.org/10.4310/pamq.2016.v12.n2.a6

2016-01-01

Pure and Applied Mathematics Quarterly

Abstract:In this paper, we investigate Yau's rigidity problem for compact submanifolds with parallel mean curvature in pinched Riemannian manifolds. Firstly, we prove that if M-n is an oriented closed minimal submanifold in an (n + p)-dimensional complete simply connected Riemannian manifold Nn(+p), then there exists a constant delta(0)(n, p) is an element of (0, 1) such that if the sectional curvature of N satisfies (K) over bar (N) is an element of[delta(0)(n, p), 1], and if M has a lower bound for the sectional curvature and an upper bound for the normalized scalar curvature, then N is isometric to Sn+p. Moreover, M is either a totally geodesic sphere, one of the Clifford minimal hypersurfaces S-k(root k/n) x S-n (k)(root n-k/n) in Sn+1 for k = 1,..., n-1, or the Veronese submanifold in Sn+d, where d = 1/2n(n + 1) - 1. We then generalize the above theorem to the case where M ia a compact submanifold with parallel mean curvature in a pinched Riemannian manifold.
Compact Kähler Manifolds with Positive Orthogonal Bisectional Curvature

Huitao Feng,Kefeng Liu,Xueyuan Wan

DOI: https://doi.org/10.4310/mrl.2017.v24.n3.a7

2017-01-01

Mathematical Research Letters

Abstract:In this short note, using Siu-Yau's method [14], we give a new proof that any n-dimensional compact Kahler manifold with positive orthogonal bisectional curvature must be biholomorphic to P-n.
On the First Eigenvalue of Finsler Manifolds with Nonnegative Weighted Ricci Curvature

SongTing Yin,Qun He,YiBing Shen

DOI: https://doi.org/10.1007/s11425-013-4707-9

2013-01-01

Science China Mathematics

Abstract:We prove that for a compact Finsler manifold M with nonnegative weighted Ricci curvature,if its first closed(resp.Neumann)eigenvalue of Finsler-Laplacian attains the sharp lower bound,then M is isometric to a circle(resp.a segment).Moreover,a lower bound of the first eigenvalue of Finsler-Laplacian with Dirichlet boundary condition is also estimated.These generalize the corresponding results in recent literature.
A sphere theorem for Bach-flat manifolds with positive constant scalar curvature

Yi Fang,Wei Yuan

DOI: https://doi.org/10.1016/j.difgeo.2019.01.004

IF: 0.536

2019-06-01

Differential Geometry and its Applications

Abstract:A classic gap theorem for complete non-compact Ricci flat manifolds by M. Anderson suggests that one can get the rigidity of certain spaces simply by passing local curvature estimates on geodesic balls to global. Using similar ideas, Kim showed that a 4-dimensional complete non-compact Bach-flat manifold with vanishing scalar curvature and small L 2 -curvature tensor has to be flat. Unfortunately, this method does not generalize to compact manifolds without boundary. Applying a different approach, we show that a closed Bach-flat Riemannian manifold with positive constant scalar curvature has to be locally spherical if its Weyl and traceless Ricci tensors are small in the sense of either L ∞ or L n 2 -norm. These results generalize a rigidity theorem of positive Einstein manifolds due to M.-A. Singer. As an application, we can partially recover the well-known Chang–Gursky–Yang's 4-dimensional conformal sphere theorem.

mathematics, applied
Rigidity Theorems for Compact Manifolds with Boundary and Positive Ricci Curvature

Fengbo Hang,Xiaodong Wang

DOI: https://doi.org/10.48550/arXiv.0911.0380

2009-11-02

Differential Geometry

Abstract:We prove some boundary rigidity results for the hemisphere under a lower bound for Ricci curvature. The main result can be viewed as the Ricci version of a conjecture of Min-Oo.
Scalar-mean rigidity theorem for compact manifolds with boundary

Jinmin Wang,Zhichao Wang,Bo Zhu

2024-10-09

Abstract:We prove a scalar-mean rigidity theorem for compact Riemannian manifolds with boundary in dimension less than five by extending Schoen-Yau dimension reduction argument. As a corollary, we prove the sharp spherical radius rigidity theorem and best NNSC fill-in in terms of the mean curvature. Additionally, we prove a (Lipschitz) Listing type scalar-mean comparison rigidity theorem for these dimensions. Our results remove the spin assumption.

Differential Geometry
Rigidity of Einstein Manifolds with Positive Scalar Curvature

Hong-wei Xu,Juan-ru Gu

DOI: https://doi.org/10.1007/s00208-013-0957-7

2013-01-01

Mathematische Annalen

Abstract:We prove that if $M^n(n\ge 4)$ is a compact Einstein manifold whose normalized scalar curvature and sectional curvature satisfy pinching condition $R_0>\sigma _{n}K_{\max }$, where $\sigma _n\in (\frac{1}{4},1)$ is an explicit positive constant depending only on $n$, then $M$ must be isometric to a spherical space form. Moreover, we prove that if an $n(\ge {\!\!4})$-dimensional compact Einstein manifold satisfies $K_{\min }\ge \eta _n R_0,$ where $\eta _n\in (\frac{1}{4},1)$ is an explicit positive constant, then $M$ is locally symmetric. It should be emphasized that the pinching constant $\eta _n$ is optimal when $n$ is even. We then obtain some rigidity theorems for Einstein manifolds under $(n-2)$-th Ricci curvature and normalized scalar curvature pinching conditions. Finally we extend the theorems above to Einstein submanifolds in a Riemannian manifold, and prove that if $M$ is an $n(\ge {\!\!4})$-dimensional compact Einstein submanifold in the simply connected space form $F^{N}(c)$ with constant curvature $c\ge 0$, and the normalized scalar curvature $R_0$ of $M$ satisfies $R_0>\frac{A_n}{A_n+4n-8}(c+H^2),$ where $A_n=n^3-5n^2+8n$, and $H$ is the mean curvature of $M$, then $M$ is isometric to a standard $n$-sphere.
Rigidity for Einstein manifolds under bounded covering geometry

Cuifang Si,Shicheng Xu

2024-09-24

Abstract:In this note we prove three rigidity results for Einstein manifolds with bounded covering geometry. (1) An almost flat manifold $(M,g)$ must be flat if it is Einstein, i.e. $\operatorname{Ric}_g=\lambda g$ for some real number $\lambda$. (2) A compact Einstein manifolds with a non-vanishing and almost maximal volume entropy is hyperbolic. (3) A compact Einstein manifold admitting a uniform local rewinding almost maximal volume is isometric to a space form.

Differential Geometry
Rigidities of Sasakian Manifolds with Constant Pseudo- Hermitian Scalar Curvature

Dong Yuxin,Ji Qingchun,Ren Yibin

DOI: https://doi.org/10.1360/n012017-00190

2018-01-01

Scientia Sinica Mathematica

Abstract:In this paper, we establish some rigidity theorems of Sasakian pseudo-Einstein manifolds and Sasakian space forms under some conditions of growth of pseudo-Hermitian curvature and the first eigenvalue of Schr(o)dinger type operator.
Generalized Ejiri’s Rigidity Theorem for Submanifolds in Pinched Manifolds

Hongwei Xu,Li Lei,Juanru Gu

DOI: https://doi.org/10.1007/s11401-020-0199-4

2020-01-01

Abstract:Let Mn(n ≥ 4) be an oriented compact submanifold with parallel mean curvature in an (n + p)-dimensional complete simply connected Riemannian manifold Nn+p. Then there exists a constant δ(n, p) 2 (0, 1) such that if the sectional curvature of N satisfies $${\overline K _N} \in \;\,\left[ {\delta \left( {n,p} \right),\;1} \right]$$, and if M has a lower bound for Ricci curvature and an upper bound for scalar curvature, then N is isometric to Sn+p. Moreover, M is either a totally umbilic sphere $${S^n}({1 \over {\sqrt {1 + {H^2}} }})$$, a Clifford hypersurface $${S^m}({1 \over {\sqrt {2(1 + {H^2})} }})\; \times \;{S^m}({1 \over {\sqrt {2(1 + {H^2})} }})$$ in the totally umbilic sphere $${S^{n+1}}({1 \over {\sqrt {1 + {H^2}} }})$$ with n = 2m, or $${\mathbb{C}{\rm{P}}^2}\left( {{4 \over 3}\left( {1 + {H^2}} \right)} \right)$$ in $${S^7}({1 \over {\sqrt {1 + {H^2}} }})$$. This is a generalization of Ejiri’s rigidity theorem.
On Negatively Curved Finsler Manifolds of Scalar Curvature

XH Mo,ZM Shen

DOI: https://doi.org/10.4153/cmb-2005-010-3

2005-01-01

Canadian Mathematical Bulletin

Abstract:In this paper, we prove a global rigidity theorem for negatively curved Finsler metrics on a compact manifold of dimension it greater than or equal to 3. We show that for such a Finsler manifold, if the flag curvature is a scalar function on the tangent bundle, then the Finsler metric is of Randers type. We also study the case when the Finsler metric is locally projectively flat.
Rigidity Theorems for Diameter Estimates of Compact Manifold with Boundary

Haizhong Li,Yong Wei

DOI: https://doi.org/10.1093/imrn/rnu052

2014-01-01

International Mathematics Research Notices

Abstract:Let (N, g) be an n-dimensional complete Riemannian manifold with nonempty boundary partial derivative N. Assume that the Ricci curvature of (N, g) has a negative lower bound Ric >= -(n-1)c(2) for some c> 0, and the mean curvature of the boundary partial derivative N satisfies H = -(n-1) c(0) > (n-1)c for some c(0) > c > 0. Then a known result (cf. [12]) says that sup(x is an element of N) d(x, partial derivative N) <= 1/c coth(-1) c(0)/c. In this paper, we prove the rigidity result that if N is compact, then the equality holds if and only if (N, g) is isometric to the geodesic ball of radius 1/c coth(-1) c(0)/c in an n-dimensional hyperbolic space H-n(-c(2)) of constant sectional curvature -c(2). Moreover, we prove an analogous result for manifold with m-Bakry- Emery Ricci curvature bounded below by a negative constant.
Rigidity and Non-Rigidity of $\Mathbb{h}^n/\mathbb{z}^{n-2}$ with Scalar Curvature Bounded from Below

Tianze Hao,Yuhao Hu,Peng Liu,Yuguang Shi

DOI: https://doi.org/10.3842/sigma.2023.083

2023-01-01

Abstract:We show that the hyperbolic manifold $\mathbb{H}^n/\mathbb{Z}^{n-2}$ is not rigid under all compactly supported deformations that preserve the scalar curvature lower bound $-n(n-1)$, and that it is rigid under deformations that are further constrained by certain topological conditions. In addition, we prove two related splitting results.
Rigidity on non-negative intermediate curvature

Jianchun Chu,Kwok-Kun Kwong,Man-Chun Lee

DOI: https://doi.org/10.48550/arxiv.2208.12240

2022-01-01

Abstract: In a recent work of Brendle-Hirsch-Johne, a notion of intermediate curvature was introduced to extend the classical non-existence theorem of positive scalar curvature on torus to product manifolds. In this work, we study the rigidity when the intermediate curvature is only non-negative when the ambient dimension is at most $5$.
Rigidity and Non-Rigidity of $\mathbb{H}^n/\mathbb{Z}^{n-2}$ with Scalar Curvature Bounded from Below

Tianze Hao,Yuxin Hu,Peng Liu,Yuguang Shi

DOI: https://doi.org/10.3842/sigma.2023.083

2023-01-01

Abstract:We show that the hyperbolic manifold $\mathbb{H}^n/\mathbb{Z}^{n-2}$ is not rigid under all compactly supported deformations that preserve the scalar curvature lower bound $-n(n-1)$, and that it is rigid under deformations that are further constrained by certain topological conditions. In addition, we prove two related splitting results.
Rigidity and Non-Rigidity of H<SUP>n</SUP>/Z<SUP>n-2</SUP> with Scalar Curvature Bounded from Below

Tianze Hao,Yuhao Hu,Peng Liu,Yuguang Shi

DOI: https://doi.org/10.3842/SIGMA.2023.083

2023-01-01

Abstract:We show that the hyperbolic manifold H-n/Z(n-2) is not rigid under all compactly supported deformations that preserve the scalar curvature lower bound -n(n - 1), and that it is rigid under deformations that are further constrained by certain topological conditions. In addition, we prove two related splitting results.
Rigidity of Compact Manifolds and Positivity of Quasi-Local Mass

Yuguang Shi,Luen-Fai Tam

DOI: https://doi.org/10.1088/0264-9381/24/9/013

IF: 3.5

2007-01-01

Classical and Quantum Gravity

Abstract:In this paper, we obtain some rigidity theorems on compact manifolds with nonempty boundary. The results may be related to the positivity of some quasi-local mass of Brown–York type. The main argument is to use monotonicity of quantities similar to the Brown–York quasi-local mass in a foliation of quasi-spherical metrics. Together with a hyperbolic version of positivity of a mass quantity, we obtain our main results.
Rigidity and non-rigidity of $\H^n/\Z^{n-2}$ with scalar curvature bounded from below

Tianze Hao,Yuhao Hu,Peng Liu,Yuguang Shi

DOI: https://doi.org/10.3842/SIGMA.2023.083

2023-01-01

Abstract: We show that the hyperbolic manifold $\H^n/\Z^{n-2}$ is not rigid under all compactly supported deformations that preserve the scalar curvature lower bound $-n(n-1)$, and that it is rigid under deformations that are further constrained by certain topological conditions. In addition, we prove two related splitting results.

Rigidity theorems for compact Bach-flat manifolds with positive constant scalar curvature

Some Rigidity Properties for Manifolds with Constant K-Curvature of Modified Schouten Tensor

Prescribing Curvature Problems on the Bakry-Emery Ricci Tensor of a Compact Manifold with Boundary

On Yau Rigidity Theorem for Submanifolds in Pinched Manifolds

Compact Kähler Manifolds with Positive Orthogonal Bisectional Curvature

On the First Eigenvalue of Finsler Manifolds with Nonnegative Weighted Ricci Curvature

A sphere theorem for Bach-flat manifolds with positive constant scalar curvature

Rigidity Theorems for Compact Manifolds with Boundary and Positive Ricci Curvature

Scalar-mean rigidity theorem for compact manifolds with boundary

Rigidity of Einstein Manifolds with Positive Scalar Curvature

Rigidity for Einstein manifolds under bounded covering geometry

Rigidities of Sasakian Manifolds with Constant Pseudo- Hermitian Scalar Curvature

Generalized Ejiri’s Rigidity Theorem for Submanifolds in Pinched Manifolds

On Negatively Curved Finsler Manifolds of Scalar Curvature

Rigidity Theorems for Diameter Estimates of Compact Manifold with Boundary

Rigidity and Non-Rigidity of $\Mathbb{h}^n/\mathbb{z}^{n-2}$ with Scalar Curvature Bounded from Below

Rigidity on non-negative intermediate curvature

Rigidity and Non-Rigidity of $\mathbb{H}^n/\mathbb{Z}^{n-2}$ with Scalar Curvature Bounded from Below

Rigidity and Non-Rigidity of H<SUP>n</SUP>/Z<SUP>n-2</SUP> with Scalar Curvature Bounded from Below

Rigidity of Compact Manifolds and Positivity of Quasi-Local Mass

Rigidity and non-rigidity of $\H^n/\Z^{n-2}$ with scalar curvature bounded from below