Extrinsic Bonnet-Myers Theorem and almost rigidity

Weiying Li,Guoyi Xu

2024-05-08

Abstract:We establish the extrinsic Bonnet-Myers Theorem for compact Riemannian manifolds with positive Ricci curvature. And we show the almost rigidity for compact hypersurfaces, which have positive sectional curvature and almost maximal extrinsic diameter in Euclidean space.

Differential Geometry,Metric Geometry

What problem does this paper attempt to address?

Prescribing Curvature Problems on the Bakry-Emery Ricci Tensor of a Compact Manifold with Boundary

Weimin Sheng,Lixia Yuan

DOI: https://doi.org/10.1007/s11401-013-0809-5

2014-01-01

Abstract:The authors consider the problem of conformally deforming a metric such that the k-curvature defined by an elementary symmetric function of the eigenvalues of the Bakry-Emery Ricci tensor on a compact manifold with boundary to a prescribed function. A consequence of our main result is that there exists a complete metric such that the Monge-Ampère type equation with respect to its Bakry-Emery Ricci tensor is solvable, provided that the initial Bakry-Emery Ricci tensor belongs to a negative convex cone.
Some Rigidity Properties for Manifolds with Constant K-Curvature of Modified Schouten Tensor

Leyang Bo,Weimin Sheng

DOI: https://doi.org/10.1007/s12220-018-0097-0

2018-01-01

Journal of Geometric Analysis

Abstract:In this paper, we study the rigidity problem on closed locally conformally flat manifolds with constant k-curvature or constant quotient curvature. We prove that such manifolds must have constant sectional curvature under the assumption that the manifolds have positive sectional curvature. The same result is also held on closed locally conformally flat manifolds with totally geodesic boundary.
On Yau Rigidity Theorem for Submanifolds in Pinched Manifolds

Hong-Wei Xu,Li Lei,Juan-Ru Gu

DOI: https://doi.org/10.4310/pamq.2016.v12.n2.a6

2016-01-01

Pure and Applied Mathematics Quarterly

Abstract:In this paper, we investigate Yau's rigidity problem for compact submanifolds with parallel mean curvature in pinched Riemannian manifolds. Firstly, we prove that if M-n is an oriented closed minimal submanifold in an (n + p)-dimensional complete simply connected Riemannian manifold Nn(+p), then there exists a constant delta(0)(n, p) is an element of (0, 1) such that if the sectional curvature of N satisfies (K) over bar (N) is an element of[delta(0)(n, p), 1], and if M has a lower bound for the sectional curvature and an upper bound for the normalized scalar curvature, then N is isometric to Sn+p. Moreover, M is either a totally geodesic sphere, one of the Clifford minimal hypersurfaces S-k(root k/n) x S-n (k)(root n-k/n) in Sn+1 for k = 1,..., n-1, or the Veronese submanifold in Sn+d, where d = 1/2n(n + 1) - 1. We then generalize the above theorem to the case where M ia a compact submanifold with parallel mean curvature in a pinched Riemannian manifold.
On Intrinsic Rigidity for Minimal Submanifolds in A Sphere

YB SHEN

DOI: https://doi.org/10.1360/ya1989-32-7-769

1989-01-01

Abstract:In this paper, some intrinsic rigidity theorems are given for compact minimal submanifolds in a sphere. In particular, the pinching constant of J. Simons is improved for higher codimensions.
Generalized Ejiri’s Rigidity Theorem for Submanifolds in Pinched Manifolds

Hongwei Xu,Li Lei,Juanru Gu

DOI: https://doi.org/10.1007/s11401-020-0199-4

2020-01-01

Abstract:Let Mn(n ≥ 4) be an oriented compact submanifold with parallel mean curvature in an (n + p)-dimensional complete simply connected Riemannian manifold Nn+p. Then there exists a constant δ(n, p) 2 (0, 1) such that if the sectional curvature of N satisfies $${\overline K _N} \in \;\,\left[ {\delta \left( {n,p} \right),\;1} \right]$$, and if M has a lower bound for Ricci curvature and an upper bound for scalar curvature, then N is isometric to Sn+p. Moreover, M is either a totally umbilic sphere $${S^n}({1 \over {\sqrt {1 + {H^2}} }})$$, a Clifford hypersurface $${S^m}({1 \over {\sqrt {2(1 + {H^2})} }})\; \times \;{S^m}({1 \over {\sqrt {2(1 + {H^2})} }})$$ in the totally umbilic sphere $${S^{n+1}}({1 \over {\sqrt {1 + {H^2}} }})$$ with n = 2m, or $${\mathbb{C}{\rm{P}}^2}\left( {{4 \over 3}\left( {1 + {H^2}} \right)} \right)$$ in $${S^7}({1 \over {\sqrt {1 + {H^2}} }})$$. This is a generalization of Ejiri’s rigidity theorem.
Rigidity Theorems for Compact Manifolds with Boundary and Positive Ricci Curvature

Fengbo Hang,Xiaodong Wang

DOI: https://doi.org/10.48550/arXiv.0911.0380

2009-11-02

Differential Geometry

Abstract:We prove some boundary rigidity results for the hemisphere under a lower bound for Ricci curvature. The main result can be viewed as the Ricci version of a conjecture of Min-Oo.
Complete stable minimal hypersurfaces in positively curved 4-manifolds

Otis Chodosh,Chao Li,Douglas Stryker

2024-01-16

Abstract:We show that the combination of non-negative sectional curvature (or $2$-intermediate Ricci curvature) and strict positivity of scalar curvature forces rigidity of complete (non-compact) two-sided stable minimal hypersurfaces in a $4$-manifold with bounded curvature. In particular, this implies the nonexistence of complete two-sided stable minimal hypersurface in a closed $4$-manifold with positive sectional curvature. Our work leads to new comparison results. We also construct various examples showing rigidity of stable minimal hypersurfaces can fail under other curvature conditions.

Differential Geometry
Rigidity and nonexistence of CMC hypersurfaces in 5-manifolds

Han Hong,Zetian Yan

2024-05-23

Abstract:We prove that the nonnegative $3$-intermediate Ricci curvature and uniformly positive $k$-triRic curvature implies rigidity of complete noncompact two-sided stable minimal hypersurfaces in a Riemannian manifold $(X^5,g)$ with bounded geometry. The nonnegativity of $3$-intermediate Ricci curvature can be replaced by nonnegative Ricci and biRic curvature. In particular, there is no complete noncompact finite index CMC hypersurface in a closed $5$-dimensional manifold with positive sectional curvature. It extends result of Chodosh-Li-Stryker [to appear in J. Eur. Math. Soc (2024)] to $5$-dimensions. We also prove that complete constant mean curvature hypersurfaces in hyperbolic space $\mathbb{H}^5$ with finite index and the mean curvature greater than $\frac{\sqrt{65}}{8}$ must be compact. This improves the previous larger bound $\frac{\sqrt{175}}{\sqrt{148}}$ on the mean curvature.

Differential Geometry
Bonnet-Myers rigidity theorem for globally hyperbolic Lorentzian length spaces

Tobias Beran

2024-02-04

Abstract:We prove a synthetic Bonnet-Myers rigidity theorem for globally hyperbolic Lorentzian length spaces with global curvature bounded below by $K<0$ and an open distance realizer of length $L=\frac{\pi}{\sqrt{|K|}}$. In the course of the proof, we show that the space necessarily is a warped product with warping function $\cos:(-\frac{\pi}{2},\frac{\pi}{2})\to\mathbb{R}_+$.

Differential Geometry,Mathematical Physics,Metric Geometry
Rigidity on non-negative intermediate curvature

Jianchun Chu,Kwok-Kun Kwong,Man-Chun Lee

DOI: https://doi.org/10.48550/arxiv.2208.12240

2022-01-01

Abstract: In a recent work of Brendle-Hirsch-Johne, a notion of intermediate curvature was introduced to extend the classical non-existence theorem of positive scalar curvature on torus to product manifolds. In this work, we study the rigidity when the intermediate curvature is only non-negative when the ambient dimension is at most $5$.
On Compact Riemannian Manifolds with Convex Boundary and Ricci Curvature Bounded from Below

Xiaodong Wang

DOI: https://doi.org/10.1007/s12220-020-00422-1

2020-05-22

Abstract:We propose to study positive harmonic functions satisfying a nonlinear Neuman condition on a compact Riemannian manifold with nonnegative Ricci curvature and strictly convex boundary. A precise conjecture is formulated. We discuss its implications and present some partial results. Related questions are discussed for compact Riemannian manifolds with positive Ricci curvature and convex boundary.
Positive Intermediate Ricci Curvature with Maximal Symmetry Rank

Lee Kennard,Lawrence Mouillé

DOI: https://doi.org/10.1007/s12220-024-01575-z

2024-03-16

Journal of Geometric Analysis

Abstract:Generalizing the foundational work of Grove and Searle, the second author proved upper bounds on the ranks of isometry groups of closed Riemannian manifolds with positive intermediate Ricci curvature and established some topological rigidity results in the case of maximal symmetry rank and positive second intermediate Ricci curvature. Here, we recover even stronger topological rigidity, including results for higher intermediate Ricci curvatures and for manifolds with non-trivial fundamental groups.

mathematics
f -Minimal Surface and Manifold with Positive m -Bakry–Émery Ricci Curvature

Haizhong Li,Yong Wei

DOI: https://doi.org/10.1007/s12220-013-9434-5

2013-01-01

Journal of Geometric Analysis

Abstract:In this paper, we first prove a compactness theorem for the space of closed embedded f -minimal surfaces of fixed topology in a closed three-manifold with positive Bakry–Émery Ricci curvature. Then we give a Lichnerowicz type lower bound of the first eigenvalue of the f -Laplacian on a compact manifold with positive m -Bakry–Émery Ricci curvature, and prove that the lower bound is achieved only if the manifold is isometric to the n -sphere, or the n -dimensional hemisphere. Finally, for a compact manifold with positive m -Bakry–Émery Ricci curvature and f -mean convex boundary, we prove an upper bound for the distance function to the boundary, and the upper bound is achieved if and only if the manifold is isometric to a Euclidean ball.
On some rigidity theorems of Q-curvature

Yiyan Xu,Shihong Zhang

2023-08-05

Abstract:In this paper, we investigate the rigidity of Q-curvature. Specifically, we consider a closed, oriented $n$-dimensional ($n\geq6$) Riemannian manifold $(M,g)$ and prove the following results under the condition $\int_{M} \nabla R\cdot\nabla \mathrm{Q}\mathrm{d} V_g\leq0$. (1) If $(M,g)$ is locally conformally flat with nonnegative Ricci curvature, then $(M,g)$ is isometric to a quotient of $\mathbb{R}^n$, $\mathbb{S}^n$, or $\mathbb{R}\times\mathbb{S}^{n-1}$. (2) If $(M,g)$ has $\delta^2 W=0$ with nonnegative sectional curvature, then $(M,g)$ is isometric to a quotient of the product of Einstein manifolds. Additionally, we investigate some rigidity theorems involving Q-curvature about hypersurfaces in simply-connected space forms. We also show the uniqueness of metrics with constant scalar curvature and constant Q-curvature in a fixed conformal class.

Differential Geometry
Rigidity Results for Compact Submanifolds with Pinched Ricci Curvature in Euclidean and Spherical Space Forms

Jianquan Ge,Ya Tao,Yi Zhou

2024-11-21

Abstract:For compact submanifolds in Euclidean and Spherical space forms with Ricci curvature bounded below by a function $\alpha(n,k,H,c)$ of mean curvature, we prove that the submanifold is either isometric to the Einstein Clifford torus, or a topological sphere for the maximal bound $\alpha(n,[\frac{n}{2}],H,c)$, or has up to $k$-th homology groups vanishing. This gives an almost complete (except for the differentiable sphere theorem) characterization of compact submanifolds with pinched Ricci curvature, generalizing celebrated rigidity results obtained by Ejiri, Xu-Tian, Xu-Gu, Xu-Leng-Gu, Vlachos, Dajczer-Vlachos.

Differential Geometry
Ricci curvature, minimal surfaces and sphere theorems

Ying Shen,Shunhui Zhu

DOI: https://doi.org/10.48550/arXiv.dg-ga/9709002

1997-08-30

Abstract:Using an analogue of Myers' theorem for minimal surfaces and three dimensional topology, we prove the diameter sphere theorem for Ricci curvature in dimension three and a corresponding eigenvalue pinching theorem. This settles these two open problems for closed 3 manifolds with positive Ricci curvature since they are both false in dimensions greater than three.

Differential Geometry
Generalized Ricci Surfaces

Benoît Daniel,Yiming Zang

DOI: https://doi.org/10.1007/s12220-024-01706-6

2024-06-08

Journal of Geometric Analysis

Abstract:We consider smooth Riemannian surfaces whose curvature K satisfies the relation away from points where for some , which we call generalized Ricci surfaces. We prove some isometric immersion theorems allowing points where using properties of log-harmonic functions. For instance, we obtain a characterization of Riemannian surfaces that locally admit minimal isometric immersions, possibly with umbilical points, into a 3-dimensional Riemannian manifold of constant sectional curvature. We also give an application to convex affine spheres. Finally, we study compact generalized Ricci surfaces: we obtain topological obstructions and construct examples.

mathematics
A Differentiable Sphere Theorem Inspired by Rigidity of Minimal Submanifolds

Hong-Wei Xu,Ling Tian

DOI: https://doi.org/10.2140/pjm.2011.254.499

2011-01-01

Pacific Journal of Mathematics

Abstract:We prove a vanishing theorem for the fundamental group of a compact submanifold in a space form, and then present a refined version of Ejiri's rigidity theorem for minimal submanifolds in a sphere. Inspired by the refined Ejiri theorem, we verify a new differentiable sphere theorem for compact submanifolds in space forms. We also show that our differentiable sphere theorem is sharp. We emphasize that our method of Ricci flow in the proof of the sphere theorem seems useful in the study of curvature and topology. Also, we obtain a differentiable pinching theorem for compact submanifolds in a Riemannian manifold.
Rigidity Theorems for Diameter Estimates of Compact Manifold with Boundary

Haizhong Li,Yong Wei

DOI: https://doi.org/10.1093/imrn/rnu052

2014-01-01

International Mathematics Research Notices

Abstract:Let (N, g) be an n-dimensional complete Riemannian manifold with nonempty boundary partial derivative N. Assume that the Ricci curvature of (N, g) has a negative lower bound Ric >= -(n-1)c(2) for some c> 0, and the mean curvature of the boundary partial derivative N satisfies H = -(n-1) c(0) > (n-1)c for some c(0) > c > 0. Then a known result (cf. [12]) says that sup(x is an element of N) d(x, partial derivative N) <= 1/c coth(-1) c(0)/c. In this paper, we prove the rigidity result that if N is compact, then the equality holds if and only if (N, g) is isometric to the geodesic ball of radius 1/c coth(-1) c(0)/c in an n-dimensional hyperbolic space H-n(-c(2)) of constant sectional curvature -c(2). Moreover, we prove an analogous result for manifold with m-Bakry- Emery Ricci curvature bounded below by a negative constant.

Extrinsic Bonnet-Myers Theorem and almost rigidity

Prescribing Curvature Problems on the Bakry-Emery Ricci Tensor of a Compact Manifold with Boundary

Some Rigidity Properties for Manifolds with Constant K-Curvature of Modified Schouten Tensor

On Yau Rigidity Theorem for Submanifolds in Pinched Manifolds

On Intrinsic Rigidity for Minimal Submanifolds in A Sphere

Generalized Ejiri’s Rigidity Theorem for Submanifolds in Pinched Manifolds

Rigidity Theorems for Compact Manifolds with Boundary and Positive Ricci Curvature

Complete stable minimal hypersurfaces in positively curved 4-manifolds

Rigidity and nonexistence of CMC hypersurfaces in 5-manifolds

Bonnet-Myers rigidity theorem for globally hyperbolic Lorentzian length spaces

Rigidity on non-negative intermediate curvature

On Compact Riemannian Manifolds with Convex Boundary and Ricci Curvature Bounded from Below

Positive Intermediate Ricci Curvature with Maximal Symmetry Rank

f -Minimal Surface and Manifold with Positive m -Bakry–Émery Ricci Curvature

On some rigidity theorems of Q-curvature

Rigidity Results for Compact Submanifolds with Pinched Ricci Curvature in Euclidean and Spherical Space Forms

Ricci curvature, minimal surfaces and sphere theorems

Generalized Ricci Surfaces

A Differentiable Sphere Theorem Inspired by Rigidity of Minimal Submanifolds

Rigidity Theorems for Diameter Estimates of Compact Manifold with Boundary