Abstract:Development of energy-efficient fast cycling accelerator magnets is critical for the next generation of proton rapid cycling synchrotrons (RCS) for neutrino research and booster accelerators of future muon colliders. We see a unique opportunity for having such magnets to be built on base of High Temperature Superconductors (HTS). Besides being superconducting at relatively high temperatures, rare-earth HTS tapes have shown very small AC losses compared to low-temperature NbTi superconductor cables. Recent tests of the HTS-based 0.5 m long two-bore superconducting accelerator magnet have shown record high dB/dt ramping rates of about 300 T/s at 10 Hz repetition rate and 0.5 T B-field span. No temperature rise in 6 K cooling He was observed within the 0.003 K error setting the upper limit on the cryogenic power loss in the magnet conductor coil to be less than 0.2 W/m. Based on this result we outline a possible upgrade of this test magnet design to 2 T B-field in the 10 mm beam gap with the dB/dt ramping rates up to 1000 T/s. The power test results of this short sample magnet will be used to project both cryogenic and electrical power losses as a function of the magnet B-field and the dB/dt ramping rates. Then these projections will be scaled to the range of expected accelerator magnet beam gaps and B-fields for the proton and muon RCS accelerators. We invite collaborators to join these studies and call for support of the R&D program aimed at comprehensive demonstration of this approach that includes design, construction, and power tests of a long prototype of the HTS-based fast-cycling accelerator magnet by 2028.

Test samples and infrastructure for accelerator magnet developments

Commissioning, Performance, and Effect of the Quench Current-boosting Device on a Dedicated Superconducting Magnet

Mechanical Behavior of a 16-T FCC Dipole Magnet During a Quench

Simulation of Thermo-Mechanical Stresses After a Quench in the 15 T Test Facility Dipole Magnet

Training-free demonstration of a 5.4 T Nb 3 Sn canted-cosine-theta accelerator dipole impregnated with paraffin wax

Models and experimental results from the wide aperture Nb-Ti magnets for the LHC upgrade

Manufacturing and Testing of Accelerator Superconducting Magnets

Assessment of Training Performance, Degradation and Robustness of Paraffin-Wax Impregnated Nb 3 Sn Demonstrator under High Magnetic Field

Analysis of the mechanical performance of the 4.2 m long MQXFA magnets for the Hi-Lumi LHC Upgrade

Assessment and Performance of Flexible Quench Antenna Array Diagnostics for Superconducting Magnets

Quench Analysis and Improvement of a Semi-Open Split NbTi Superconducting Magnet With Large Inductance

Fast cycling HTS based superconducting accelerator magnets: Feasibility study and readiness demonstration program driven by neutrino physics and muon collider needs

Quench Analysis and Experiments on Nb3Sn Superconducting Magnet Half-Length Prototype

A Combined Testing and Modelling Methodology for the Mechanics of High-Field Superconducting Magnets

Understanding training in superconducting accelerator magnets using acoustic emission diagnostics

Performance of a MQXF Nb3Sn Quadrupole Magnet Under Different Stress Level

Effect of CLIQ on training of HL-LHC quadrupole magnets

Behavior during quenches of a 40 T magnet made of LTS and HTS parts

Quench position reconstruction through harmonic field analysis in superconducting magnets

Quench Behavior of Prototype Nb-Ti HL-LHC Dipole Canted Cos-Theta Orbit Corrector Magnets

A new quench detection method for HTS magnets: stray-capacitance change monitoring