Abstract:A rapid and reliable quench detection is vital for high current superconducting magnet system to prevent irreversible damage to a magnet by the quench phenomenon. The method for detecting the occurrence of a resistive transition has been widely adopted in the superconducting magnet. In the case of the voltage monitoring by means of dedicated taps, the electron quench detection device (EQDD) conversion unit, which converts detected high voltages into voltage-drop signal, should be required in the superconducting high field magnet. The power source of traditional quench detecting system, which can monitor for superconducting magnet with middle power operation, is supplied through the power transformer since the transformer can provide galvanic isolation between circuits. On the other hand, in the case of the super high magnet systems such as Korea Superconducting Tokamak Advanced Research and International Thermonuclear experimental reactor, since the maximum operation current and voltage of the super high field magnet keep over 60 kA and 50 kV DC, a passive component, which has strong an isolation device and high dielectric resistor qualities, has been required in the super high field magnet. If the power transformer is adopted in the super high field magnet, it can cause high cost for volume capacity since it needs for higher dielectric resistance value over 500 MΩ. Authors proposed the wireless resonance antenna and multi-receiver coils which can keep high level of dielectric resistance value with stability. As well as, the wireless power charging unit can reduce system volume due to multi-charging receivers for one antenna. In this study, authors investigated the effect of inserted resonator (Sx) coil between antenna and receiver coils, as well as, evaluated the electric field and magnetic field among the resonance coils under 300 W 370 kHz RF power generator since the strong electro-magnetic fields by the resonance coils can affect the electron devices inside of the EQDD module.

Understanding training in superconducting accelerator magnets using acoustic emission diagnostics

Acoustic detection in superconducting magnets for performance characterization and diagnostics

Commissioning, Performance, and Effect of the Quench Current-boosting Device on a Dedicated Superconducting Magnet

In situ monitoring of FDM machine condition via acoustic emission

Test samples and infrastructure for accelerator magnet developments

Assessment of Training Performance, Degradation and Robustness of Paraffin-Wax Impregnated Nb 3 Sn Demonstrator under High Magnetic Field

Quench position reconstruction through harmonic field analysis in superconducting magnets

A new quench detection method for HTS magnets: stray-capacitance change monitoring

Enabling Real-Time Impedance Measurements of Operational Superconducting Circuits of Accelerator Magnets

Assessment and Performance of Flexible Quench Antenna Array Diagnostics for Superconducting Magnets

Impregnation damage monitoring for the canted-cosine-theta magnets using time-domain reflectometry

Practical Investigations of Wireless Multiple-Power Charging Unit for Electron Quench Detection Device in the Super High Field Superconducting Magnet

Training-free demonstration of a 5.4 T Nb 3 Sn canted-cosine-theta accelerator dipole impregnated with paraffin wax

Effect of CLIQ on training of HL-LHC quadrupole magnets

Efficient multiscale investigation of mechanical behavior in Nb3Sn superconducting accelerator magnet based on self-consistent clustering analysis

Diagnostic and Detectors for Charging and Damage of Dielectrics in High-gradient Accelerators

Mechanical Characterization of Low-Carbon Steels for High-Field Accelerator Magnets: Application to Nb$_{3}$Sn Low-$\beta$ Quadrupole MQXF

A Quench detection method for closed-loop superconducting coils based on currents redistribution in co-windings

A novel device for the measurement of the mechanical and magnetic axes of superconducting magnet assemblies for accelerators

Simulation of Thermo-Mechanical Stresses After a Quench in the 15 T Test Facility Dipole Magnet

Challenges and opportunities to assure future manufacturing of magnet conductors for the accelerator sector