Abstract:In this work, an innovative in situ etching treatment method to reduce surface defects of CsPbI2.85Br0.15 perovskite films by using methanol without additional passivator is proposed. A slight excess of PbI2 is generated on perovskite surface, which is beneficial to form gradient energy level alignment. Eventually, a champion CsPbI2.85Br0.15 inorganic perovskite solar cell with efficiency of 19.34% is achieved. Inorganic perovskite solar cells (IPSCs) have developed rapidly due to their good thermal stability and the bandgap suitable for perovskite/silicon tandem solar cells. However, the large openâ€�circuit voltage (VOC) deficit derived from the surface defects and the energy level structure mismatch impede the development of device performance, especially in the Pâ€�Iâ€�N structure IPSCs. Herein, an innovative in situ etching (ISE) treatment method is proposed to reduce surface defects through methanol without additional passivator. It is found that the perovskite films treated with methanol result in a slight excess of PbI2 on the surface and inserted into the grain boundaries. Therefore, the successful decrease of surface defects by methanol and the passivation of grain boundary defects by PbI2 greatly reduce the trap density of perovskite films. And the larger work function of PbI2 contributes to the energy band of perovskite surface bending downward and forms gradient energy level alignment at the I/N interface, which accelerates extraction of charge carriers. As a result, the efficiency of CsPbI2.85Br0.15 inverted IPSC is enhanced from 16.00% to 19.34%, which is one of the mostly efficient IPSCs. This work provides an original idea without additional passivator to manage the defects of inorganic perovskite.

In‐Situ Hot Oxygen Cleansing and Passivation for All‐Inorganic Perovskite Solar Cells Deposited in Ambient to Breakthrough 19% Efficiency

Enhanced Efficiency and Stability of All‐Inorganic CsPbI2Br Perovskite Solar Cells by Organic and Ionic Mixed Passivation

Optimize the Oxide/Perovskite Heterojunction Contact for Low Temperature High Efficiency and Stable All-inorganic CsPbI<inf>2</inf>Br Perovskite Solar Cells

Surface Defects Management by In Situ Etching with Methanol for Efficient Inverted Inorganic Perovskite Solar Cells

Optimize the Oxide/Perovskite Heterojunction Contact for Low Temperature High Efficiency and Stable All-inorganic CsPbI<sub>2</sub>Br Perovskite Solar Cells

Illumination Enhanced Crystallization and Defect Passivation for High Performance CsPbI3 Perovskite Solar Cells by Sacrificing Dye

Deep‐Ultraviolet Photoactivation‐Assisted Contact Engineering Toward High‐Efficiency and Stable All‐Inorganic CsPbI 2 Br Perovskite Solar Cells

Synchronous Surface Reconstruction and Defect Passivation for High-Performance Inorganic Perovskite Solar Cells.

In Situ Back‐Contact Passivation Improves Photovoltage and Fill Factor in Perovskite Solar Cells

Defect‐Engineering‐Enabled High‐Efficiency All‐Inorganic Perovskite Solar Cells

High Efficiency (16.37%) of Cesium Bromide—Passivated All‐Inorganic CsPbI2Br Perovskite Solar Cells

Efficient inorganic vapor‐assisted defects passivation for perovskite solar module

Vacancies substitution induced interfacial dipole formation and defect passivation for highly stable perovskite solar cells

Intermediate Phase Modification Enables High‐Performance Iodine‐Rich Inorganic Perovskite Solar Cells with 3000‐Hour Stability

Fluorinated organic ammonium salt passivation for high-efficiency and stable inverted CsPbI2Br perovskite solar cells

Gas Molecule Assisted All-Inorganic Dual-Interface Passivation Strategy for High-Performance Perovskite Solar Cells

A Facile Surface Passivation Method for Efficient Inorganic CsPbI2Br Perovskite Solar Cells with Efficiencies over 15%

Surface Passivation of All‐Inorganic CsPbI 2 Br with a Fluorinated Organic Ammonium Salt for Perovskite Solar Cells with Efficiencies over 16%

Pressure-Assisted Space-Confinement Strategy to Eliminate PbI 2 in Perovskite Layers toward Improved Operational Stability

Improved efficiency and stability of inverse perovskite solar cells via passivation cleaning

Surface Cleaning and Passivation Strategy for Durable Inverted Formamidinium–Cesium Triiodide Perovskite Solar Cells