Abstract:We report on a free-standing 3D-printed Si/PEDOT:PSS/PEG electrode based on silicon nanoparticles (Si) as an active material for lithium-ion batteries (LIBs) that are fabricated by 3D printing via digital light processing (DLP). Compared with the Si electrode prepared by the traditional method, the 3D-printed Si/PEDOT:PSS/PEG electrode developed by DLP preserves a specific discharge capacity of 1658.4 mA h g-1, with a capacity fade of 0.3% per cycle at a current density of 800 mA g-1 after 125 cycles. This helps in maintaining its structural integrity and enables it to exhibit significantly high flexibility with an enhanced load of 4.2 mg cm-2. The resulting free-standing electrode shows that 3D printing has significant potential for application to a variety of LIB technologies.

Correction: DLP printing of a flexible micropattern Si/PEDOT:PSS/PEG electrode for lithium-ion batteries

Correction: Toward robust lithium-sulfur batteries via advancing Li2S deposition.

Correction: Plasticizer and catalyst co-functionalized PEDOT:PSS enables stretchable electrochemical sensing of living cells

Correction: Engineering lithiophilic Ni-Al@LDH interlayers on a garnet-type electrolyte for solid-state lithium metal batteries

Correction: Interfacial Modification Between Argyrodite-Type Solid-State Electrolytes and Li Metal Anodes Using LiPON Interlayers

Correction: The examination of graphene oxide for rechargeable lithium storage as a novel cathode material

Correction: A rechargeable Li–CO2 battery based on the preservation of dimethyl sulfoxide

Correction: Enhanced charge transport from Pd-doping in CsPbBr3 quantum dots for efficient photoelectrocatalytic water splitting

Correction: Multifunctional sulfur-mediated strategy enabling fast-charging Sb 2 S 3 micro-package anode for lithium-ion storage

Toward Robust Lithium-Sulfur Batteries Via Advancing Li2S Deposition (vol 15, Pg 7949, 2024)

DLP printing of a flexible micropattern Si/PEDOT:PSS/PEG electrode for lithium-ion batteries

Correction: Enhanced structural stability and overall conductivity of Li-rich layered oxide materials achieved by a dual electron/lithium-conducting coating strategy for high-performance lithium-ion batteries

Correction: A Lithium Air Battery with a Lithiated Al-carbon Anode.

Correction: Exfoliation of Amorphous Phthalocyanine Conjugated Polymers into Ultrathin Nanosheets for Highly Efficient Oxygen Reduction

Correction: Luo et al. The Effects of Different Anode Positions on the Electrical Properties of Square-Silicon Drift Detector. Micromachines 2022, 13, 1496

Correction: Preventing lead leakage in perovskite solar cells and modules with a low-cost and stable chemisorption coating

Correction to “Kinetics on Li Deintercalation in Mg- or Li-Doped SiO/Graphite Composite Anodes for Li Ion Batteries: Dopant Effect”

Correction: Corrigendum: Multi-shelled Metal Oxides Prepared Via an Anion-Adsorption Mechanism for Lithium-Ion Batteries

Correction: A photochromic zinc-based coordination polymer for a Li-ion battery anode with high capacity and stable cycling stability

Correction: Large-scale synthesis of ultrafine Fe 3 C nanoparticles embedded in mesoporous carbon nanosheets for high-rate lithium storage

Author Correction: A high-energy and long-cycling lithium–sulfur pouch cell via a macroporous catalytic cathode with double-end binding sites