Abstract:Solid-state batteries (SSBs) using lithium (Li) metal anodes and solid-state electrolytes (SSEs) can offer both improved energy densities and, by removing flammable liquid electrolytes, improved safety. The argyrodite-type Li6PS5Cl ceramic is an attractive candidate SSE material because of its high ionic conductivity (>1 mS cm(-1)) at room temperature and relatively ductile mechanical properties. However, interface contact issues between the SSE and Li metal hamper the practical development of solid-state Li metal batteries. In this work, we show that the interfacial resistance between the Li6PS5Cl SSE and Li metal anode can be reduced to as low as 1.3 omega cm(2) in symmetric cells by introducing a thin amorphous and Li-ion conducting lithium phosphorus oxynitride (LiPON) interlayer. We demonstrate that this interlayer improves the wetting behaviour of the Li6PS5Cl SSE, and helps form an effective conformal interfacial contact between the Li6PS5Cl SSE and Li metal. LiPON coated Li6PS5Cl symmetric cells with reduced interfacial resistance exhibit stable Li plating/stripping cycling for over 1000 h at 0.5 mA cm(-2), and a dramatically improved critical current density of 4.1 mA cm(-2) at 30 degrees C. These results demonstrate a reliable thin-film coating strategy for improving contact between the SSEs and Li metal anodes, stabilizing interfaces and realizing the practical application of solid-state Li metal batteries.

Correction: Interfacial Modification Between Argyrodite-Type Solid-State Electrolytes and Li Metal Anodes Using LiPON Interlayers

Correction: Engineering lithiophilic Ni-Al@LDH interlayers on a garnet-type electrolyte for solid-state lithium metal batteries

Erratum: An oxygen-blocking oriented multifunctional solid-electrolyte interphase as a protective layer for a lithium metal anode in lithium-oxygen batteries (Energy Environ. Sci., (2021) 14 (1439–1448) DOI: 10.1039/D0EE02931A)

Correction: Controllable Design of Multi-Metallic Aerogels As Efficient Electrocatalysts for Methanol Fuel Cells

Correction: Toward robust lithium-sulfur batteries via advancing Li2S deposition.

Correction: Preferred Planar Crystal Growth and Uniform Solid Electrolyte Interfaces Enabled by Anion Receptors for Stable Aqueous Zn Batteries

Correction: An oxygen-blocking oriented multifunctional solid–electrolyte interphase as a protective layer for a lithium metal anode in lithium–oxygen batteries

Interfacial Modification Between Argyrodite-Type Solid-State Electrolytes and Li Metal Anodes Using LiPON Interlayers

Toward Robust Lithium-Sulfur Batteries Via Advancing Li2S Deposition (vol 15, Pg 7949, 2024)

Correction: Enhanced Charge Transport Properties of an LFP/C/graphite Composite As a Cathode Material for Aqueous Rechargeable Lithium Batteries

Correction: DLP printing of a flexible micropattern Si/PEDOT:PSS/PEG electrode for lithium-ion batteries

Correction: in Situ Construction of a Continuous Ionic Conductive Coating for a High-Performance Li3VO4 Anode

Correction: A Lithium Air Battery with a Lithiated Al-carbon Anode.

Correction: in Situ Synthesis of a Silicon Flake/nitrogen-Doped Graphene-Like Carbon Composite from Organoclay for High-Performance Lithium-Ion Battery Anodes

Correction: Corrigendum: Manipulating Surface Reactions in Lithium–sulphur Batteries Using Hybrid Anode Structures

Correction: the Role of an Elastic Interphase in Suppressing Gas Evolution and Promoting Uniform Electroplating in Sodium Metal Anodes

Correction: Enhanced structural stability and overall conductivity of Li-rich layered oxide materials achieved by a dual electron/lithium-conducting coating strategy for high-performance lithium-ion batteries

Correction: Ion-selective aramid nanofiber-based Janus separators fabricated by a dry-wet phase inversion approach for lithium–sulfur batteries

Correction: Corrigendum: Multi-shelled Metal Oxides Prepared Via an Anion-Adsorption Mechanism for Lithium-Ion Batteries

An oxygen-blocking oriented multifunctional solid-electrolyte interphase as a protective layer for a lithium metal anode in lithium-oxygen batteries (vol 14, pg 1439, 2021)

Correction to “Kinetics on Li Deintercalation in Mg- or Li-Doped SiO/Graphite Composite Anodes for Li Ion Batteries: Dopant Effect”