Abstract:Also, the sentences “The first discharge and charge steps (Figure S6) deliver a specific discharge capacity of 1380 mAh g−1 for G/Sn/G, 1013 mAh g−1 for G-Sn@C, and 1572 mAh g−1 for G-Sn electrodes, with initial Coulombic efficiencies of 66.5%, 65.6%, and 64.8%, respectively.” on page 3541 should be “The first discharge and charge steps (Figure S6) deliver a specific discharge capacity of 1380 mAh g−1 for G/Sn/G, 1013 mAh g−1 for G-Sn@C, and 1637 mAh g−1 for G-Sn electrodes, with initial Coulombic efficiencies of 66.5%, 65.6%, and 61%, respectively.” The corresponding first discharge and charge curves (Figure S6) and the thermal gravimetric analysis data (Figure S2) for the control sample (G-Sn) are shown in the Supporting Information for this correction which is available from the Wiley Online Library or from the author. The arguments and conclusions of the original article are not affected. The authors apologize for any inconvenience caused.

Correction: The examination of graphene oxide for rechargeable lithium storage as a novel cathode material

Correction: Enhanced Charge Transport Properties of an LFP/C/graphite Composite As a Cathode Material for Aqueous Rechargeable Lithium Batteries

Correction: Toward robust lithium-sulfur batteries via advancing Li2S deposition.

Correction: Enhanced structural stability and overall conductivity of Li-rich layered oxide materials achieved by a dual electron/lithium-conducting coating strategy for high-performance lithium-ion batteries

Correction: Controllable Design of Multi-Metallic Aerogels As Efficient Electrocatalysts for Methanol Fuel Cells

Correction: Multifunctional sulfur-mediated strategy enabling fast-charging Sb 2 S 3 micro-package anode for lithium-ion storage

Correction: Mesoporous polyvalent Ni–Mn–Co–O composite nanowire arrays towards integrated anodes boosting high-properties lithium storage

Correction: Sulfur–hydrazine Hydrate-Based Chemical Synthesis of Sulfur@graphene Composite for Lithium–sulfur Batteries

Correction: Large-scale synthesis of ultrafine Fe 3 C nanoparticles embedded in mesoporous carbon nanosheets for high-rate lithium storage

Correction: Few-layer TiO2–B Nanosheets with N-doped Graphene Nanosheets As a Highly Robust Anode for Lithium-Ion Batteries

Correction: Multifunctional sulfur-mediated strategy enabling fast-charging Sb2S3 micro-package anode for lithium-ion storage

Correction: Corrigendum: Multi-shelled Metal Oxides Prepared Via an Anion-Adsorption Mechanism for Lithium-Ion Batteries

Correction: A Lithium Air Battery with a Lithiated Al-carbon Anode.

Correction to Retracted Article: Mesoporous amorphous FeOF nanococoons for high-rate and long-life rechargeable sodium-ion batteries (vol 3, pg 16716, 2015)

Correction: Multifunctional sulfur-mediated strategy enabling fast-charging Sb<sub>2</sub>S<sub>3</sub> micro-package anode for lithium-ion storage

Correction: Ruthenium oxide coated ordered mesoporous carbon nanofiber arrays: a highly bifunctional oxygen electrocatalyst for rechargeable Zn–air batteries

Correction: Melamine–terephthalaldehyde–lithium Complex: a Porous Organic Network Based Single Ion Electrolyte for Lithium Ion Batteries

Correction: Graphene‐Confined Sn Nanosheets with Enhanced Lithium Storage Capability

Correction to Retracted Article: Mesoporous amorphous FeOF nanococoons for high-rate and long-life rechargeable sodium-ion batteries

Correction: Pitaya-like Microspheres Derived from Prussian Blue Analogues As Ultralong-Life Anodes for Lithium Storage

Corrigendum: Topochemical Synthesis of Cobalt Oxide‐Based Porous Nanostructures for High‐Performance Lithium‐Ion Batteries