Abstract:Lithium-ion micro-batteries (LIMBs) with higher energy density have drawn extensive attention. 3D printing technique based on direct ink writing (DIW) is a low-cost and simple approach to fabricate LIMBs especially with higher areal capacity. Herein, poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) nanofibrils are first combined with carbon methyl cellulose (CMC) to achieve the 3D printing of thick LFP (LiFePO4)-PEDOT-CMC electrodes at room temperature by DIW. 3D-printed PEDOT-CMC-based composite thick electrodes demonstrate high conductivity because of the interconnected 3D network including hierarchical macro-micro porous criss-crossing filaments which can provide effective transport paths for Li ions and electrons. Further, LFP-PEDOT-CMC electrodes of different thicknesses are 3D-printed to study the effect of thicknesses on the electrochemical performances. The 3D-printed ultra-thick LFP-CMC-PEDOT electrode of 1.43 mm thickness at lower rate exhibits a highly improved areal capacity (5.63 mAh cm−2, 0.2 C) and high capacity retention (after 100 cycles, 0.2 C, 92%). The rate capability decreases steadily with the increasing thickness. However, for the extra-thick electrodes greater than 1.43 mm thickness, the discharge capacity, rate, and cycle capability decline dramatically. Electrochemical impedance spectroscopy measurements are used to explain the kinetic mechanism. For 3D-printed LFP-CMC-PEDOT electrodes blow 1.43 mm thickness, the 3D network plays the dominant role to maintain the effective transmission dynamics regardless of electrode thickness. But for the extra-thick electrodes, the greater transport distance becomes the major limiting factor resulting in the degradation of electrochemical performances. This work will offer guidance on how to apply 3D-printed ultra-thick electrodes with high energy density to LIMBs.

DLP printing of a flexible micropattern Si/PEDOT:PSS/PEG electrode for lithium-ion batteries

3D printing PEDOT-CMC-based high areal capacity electrodes for Li-ion batteries

3D printed silicon-based micro-lattices with ultrahigh areal/gravimetric capacities and robust structural stability for lithium-ion batteries

Large-scale Fabrication, 3D Tomography, and Lithium-Ion Battery Application of Porous Silicon.

Toward High Areal Energy and Power Density Electrode for Li-Ion Batteries via Optimized 3D Printing Approach.

3D-printed hierarchical porous and multidimensional conductive network based on conducting polymer/graphene oxide

3D printing of an anode scaffold for lithium batteries guided by mixture design-based sequential learning

Rationally designed N, P Co-doped porous film via steam etching as self-supported binder-free anode for high-performance lithium-ion battery

Porous Si Decorated on MXene As Free-Standing Anodes for Lithium-Ion Batteries with Enhanced Diffusion Properties and Mechanical Stability

SiO<sub>x</sub> microparticles embedded into 3D wrinkled N, S co-doped multilayer graphene sheets as a high-performance anode for long-life full lithium-ion batteries

3D printed lithium-ion batteries: An in-depth examination of the advancements in flexibility and stand-alone capability

3D printing of ultrathick natural graphite anodes for high-performance interdigitated three-dimensional lithium-ion batteries

Si Nanoparticles Embedded in Porous N-Doped Carbon Fibers as a Binder-Free and Flexible Anode for High-Performance Lithium-Ion Batteries

3D-printed highly deformable electrodes for flexible lithium ion batteries

Flexible Phosphorus Doped Carbon Nanosheets/nanofibers: Electrospun Preparation and Enhanced Li-storage Properties As Free-Standing Anodes for Lithium Ion Batteries

Preparation of lithium iron phosphate battery by 3D printing

Sb Nanoparticles Embedded in the N-Doped Carbon Fibers as Binder-Free Anode for Flexible Li-Ion Batteries

Flexible Porous Silicon/Carbon Fiber Anode for High−Performance Lithium−Ion Batteries

Nitrogen, Oxygen‐Codoped Vertical Graphene Arrays Coated 3D Flexible Carbon Nanofibers with High Silicon Content as an Ultrastable Anode for Superior Lithium Storage

Realizing High Energy Density and Flexibility of Fabric Electrode through Hierarchical Structure Design

Printed Graphite Electrodes for Fast Charging Lithium-Ion Batteries