Abstract:CO2 gasification-reforming is a promising approach for the transformation of carbonaceous materials into CO-rich syngas. Within municipal solid waste and agricultural waste streams, plastics are commonly found intermixed with biomass waste. This study delves into the CO2 gasification-reforming of biomass (cellulose) and various plastics (PET, HDPE, and PS) using a self-built online weighing fixed bed reactor and a two-stage fixed bed reactor. During the gasification-reforming of cellulose-plastic mixtures without the catalyst, the experimental gas production rate of cellulose slightly decreased, with the peak of gas production migrating to a higher temperature range. This phenomenon can be attributed to the molten plastic adhering to the cellulose surface, which impeded heat and mass transfer essential for cellulose decomposition. Furthermore, the gas production from plastics was suppressed in the mixtures, likely due to the interference of cellulose char in the decomposition of plastics. The incorporation of 2%Ni/CeO2 catalysts not only augmented gas yields and production rates but also emphasized the synergistic interactions. For the cellulose-HDPE mixture, the total gas yield was reduced by 14.9 mmol gsample −1 relative to the theoretical value. Given that HDPE possessed the highest decomposition temperature, the synergistic interaction was predominantly driven by the inhibitive nature of cellulose char. In contrast, the total gas yields for cellulose-PET and cellulose-PS mixtures increased by 8.7 mmol gsample −1 and 13.3 mmol gsample −1, respectively. The free radicals emanating from cellulose could trigger the decomposition of volatile components from plastics. Concurrently, the decomposition products of plastic could serve as hydrogen donors to stabilize the volatiles of cellulose. The interactions primarily affect the volatiles and tar components of the mixtures. The catalysts amplified gas yields by facilitating the CO2 reforming of tar, therefore, the synergistic interaction became evident upon catalyst addition. Gas chromatography-mass spectrometry analyses of the tar also corroborated the described interaction mechanisms between cellulose and plastics. Thermogravimetric analysis of used catalysts indicated that the synergistic action between cellulose and plastic could effectively diminish coke deposition, thereby preventing swift catalyst deactivation.

Pyrolysis gas from biomass and plastics over X-Mo@MgO (X = Ni, Fe, Co) catalysts into functional carbon nanocomposite: Gas reforming reaction and proper process mechanisms

Co-hydropyrolysis of Pine and HDPE over Bimetallic Catalysts: Efficient BTEX Production and Process Mechanism Analysis

Role of biochar-based catalysts in microwave-induced biomass pyrolysis: Structural properties and modification with Fe-series metals

CaMoO 4 -enhanced Ni-CaO bifunctional catalyst for biomass pyrolysis to produce hydrogen-rich gas

Production of catalytic-upgraded pyrolysis products from oiltea camellia shell and polypropylene using NiCe-X/Al2O3 and ZrO2 catalyst (X = Fe, Co)

Investigating the effect of nano-nickel-based catalyst Ni-Me/HZSM-5 on in situ catalytic pyrolysis of distillers dried grains with solubles

Insight into the Ex Situ Catalytic Pyrolysis of Biomass over Char Supported Metals Catalyst: Syngas Production and Tar Decomposition

Catalytic co-pyrolysis of waste tea residue and waste plastics to carbon nanomaterials: catalyst support, reaction temperature and product application

Synergistic interactions between cellulose and plastics (PET, HDPE, and PS) during CO2 gasification-catalytic reforming on Ni/CeO2 nanorod catalyst

Synergistic Effects of Fe@C Catalysts Prepared at Different Carbonization Temperatures on Microwave Co-Pyrolysis of Biomass and Plastic for High-Value Oil and Gas Production

Deactivation mechanism and regeneration effect of bi-metallic Fe-Ni/ZSM-5 catalyst during biomass catalytic pyrolysis

Waste Plastic Thermal-Transformed CNT@Fe–Mo/MgO for Free Radical Activation and Bacteria Sterilization

N-doped carbon carriers loaded with NiX (X = Fe, Co, Cu): Catalytic synergistic pyrolysis of herbal residues and polypropylene to generate three-phase products and carbon nanotubes

Production of MAH-Rich Bio-Oil from Co-Pyrolysis of Biomass and Plastics Using Carbonized MOF Catalysts under Microwave Irradiation

Catalytic copyrolysis of metal impregnated biomass and plastic with Ni‐based HZSM‐5 catalyst: Synergistic effects, kinetics and product distribution

Catalytic pyrolysis of biomass with Ni/Fe-CaO-based catalysts for hydrogen-rich gas: DFT and experimental study

The Removal of Tar and the Production of Methane-Rich Gas from Biomass Hydrogen Pyrolysis by Using Biochar-Based Catalysts

Co-pyrolysis of Chinese herb residue and polypropylene over Ni, Fe, Co and Cu/AC: Co-production and formation mechanism of carbon nanomaterials, liquid oil and pyrolysis gas

Synergistic modification of Ca/Co on Ni/HZSM-5 catalyst for pyrolysis of organic components in biomass tar

Synthesis of biomimetic monolithic biochar-based catalysts for catalytic decomposition of biomass pyrolysis tar

The Effect of Ni-ZSM-5 Catalysts on Catalytic Pyrolysis and Hydro-Pyrolysis of Biomass