Abstract:The carbon material prepared by co-pyrolysis of biochar and caking coal has been proved that it acts in catalytic conversion of volatiles and could be used in a granular bed duster as filter medium due to its high abrasive resistance in the coal pyrolysis technology. In this work, inactive carbon material loaded by nickel (Ni/ICM) was prepared by pyrolysis of the blend of biochar ion exchanged with nickel and caking coal, and then was steam activated obtaining activated carbon material loaded by nickel (Ni/ACM). The study investigated the in-situ catalytic conversion process of coal pyrolysis volatiles over Ni/ICM and Ni/ACM in a continuous pyrolysis downer-bed reactor. The physical and chemical properties of Ni/ICM and Ni/ACM, pyrolysis product distribution and the component of tar were analyzed, especially, the coke suspended in tar (Coke-S) was separated from tar and characterized in detail. Results show that the crystallite size of Ni and NiO in Ni/ICM is about 5-7 nm, and that is slightly larger in Ni/ACM. Compared to Ni/ICM, more nickel species, pores, acid sites, oxygen-containing functional groups and carbon defects are contained in Ni/ACM. The yields of tar and light tar (boiling point below 360 o C) are higher over Ni/ICM than over Ni/ACM. Ni/ICM further improves the tar quality compared to ICM, and the content of light oil in tar increases from 22.0 wt.% over ICM to 30.6 wt.% over Ni 3.2 /ICM. The highest light oil yield is obtained over Ni 1.9 /ICM as 3.6 wt.% and the lowest pitch yield is obtained over Ni 3.2 /ICM as 3.5 wt.%. The characterization of Coke-S shows that it is composed of large aromatic clusters crosslinked by oxygen and fine ash particles. The large aromatic clusters, as heavy component in tar, are found that its H/C molar ratio increases and condensation degree decreases over Ni/ICM and Ni/ACM in comparison with ICM and ACM, respectively, which also means that the quality of tar is improved. Besides, the oxygen in the tar may have been transferred to the coke.

N-doped carbon carriers loaded with NiX (X = Fe, Co, Cu): Catalytic synergistic pyrolysis of herbal residues and polypropylene to generate three-phase products and carbon nanotubes

Co-pyrolysis of Chinese herb residue and polypropylene over Ni, Fe, Co and Cu/AC: Co-production and formation mechanism of carbon nanomaterials, liquid oil and pyrolysis gas

Highly dispersed Co and Ni nanoparticles encapsulated in N-doped carbon nanotubes as efficient catalysts for the reduction of unsaturated oxygen compounds in aqueous phase

Production of catalytic-upgraded pyrolysis products from oiltea camellia shell and polypropylene using NiCe-X/Al2O3 and ZrO2 catalyst (X = Fe, Co)

Investigating the influences of metal-support interaction in NiFe catalysts on the quality of carbon nanomaterials from waste polypropylene

Pyrolysis gas from biomass and plastics over X-Mo@MgO (X = Ni, Fe, Co) catalysts into functional carbon nanocomposite: Gas reforming reaction and proper process mechanisms

Carbon nanotubes production from catalytic pyrolysis of polyethylene over nickel-based catalysts: The influence of support materials

Multiple metal elements in situ loaded with coal pitch-based activated carbon fibers as efficient catalysts for the conversion of p-nitrophenol

In-situ bio-oil directional conversion mechanism of catalytic biomass pyrolysis over nitrogen-doped carbon preparation by grading of nitrogen-rich cow dung

Enhanced Low-temperature Catalytic Decomposition Performance of Naphthalene over Hydrothermal Carbon-based Nanomaterials with a Hierarchical Heterostructure

Simultaneous production of aromatics-rich bio-oil and carbon nanomaterials from catalytic co-pyrolysis of biomass/plastic wastes and in-line catalytic upgrading of pyrolysis gas

N, S-co-doping of activated biochar from herb residue for enhanced electrocatalytic performance toward oxygen reduction reaction

One-step preparation of a N-CNTs@Ni foam electrode material with the co-production of H2 by catalytic reforming of N-containing compound of biomass tar

Fabrication of NiZn Bimetallic Oxides Catalysts Supported on Carbon Black Waste for Catalytic Pyrolysis of Fatty Acid

Nickel Loaded on Carbon Materials Prepared From Co-pyrolysis of Biochar and Caking Coal for Catalytic Conversion of Volatiles

Enhanced Catalytic Performance of FeCoNi/N-Doped Carbon Nanospheres as Bifunctional Oxygen Catalysts

Insight into the Ex Situ Catalytic Pyrolysis of Biomass over Char Supported Metals Catalyst: Syngas Production and Tar Decomposition

Morphology‐Engineering Construction of Anti‐Aggregated Co/N‐Doped Hollow Carbon from Metal‐Organic Frameworks for Efficient Biomass Upgrading

Insight into the catalytic mechanism of N-doped carbon nanotubes supported CoNi bimetallic catalyst boosts the base-free oxidative esterification of furfural

Activity and selectivity of Ni–Cu bimetallic zeolites catalysts on biomass conversion for bio-aromatic and bio-phenols

Rational Design of N‐doped Carbon Coated Cobalt Nanoparticles for Highly Efficient and Durable Photothermal CO2 Conversion