Abstract:The metal/carbon composites prepared by direct pyrolysis of metal–organic frameworks (MOFs) are regarded as ideal catalysts. However, conventional MOFs show a three-dimensional bulk structure. For bulk MOF-derived catalysts, most active metal sites are confined in the interior and not fully utilized. In this work, metal–organic monolayers (MOLs) are used as the starting precursors to prepare carbon-wrapped metal nanoparticles, which are further employed as catalysts for photocatalytic CO2 reduction. The as-prepared Ni-MOLs and Co-MOLs have an ultrathin thickness of ∼1 nm. It is interestingly found that their derived and nanoparticles are highly dispersive and connected with each other like a piece of paper. As compared with bulk MOF-derived counterparts, MOL-derived catalysts increase the accessibility of active metal sites, which can accelerate electron transfer from photosensitizers to and nanoparticles. In this way, the catalytic activity can be greatly improved. Besides, the magnetic nature of and nanoparticles enables the easy separation and recycling of catalysts. It is expected that this work will provide instructive guidelines for the rational design of MOL-derived catalysts.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.inorgchem.1c01443?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.inorgchem.1c01443</a>.Main products from CO2 reduction in an aqueous solution; comparison between different composite catalysts and photocatalysts; the table of BET surface areas and CO2 uptakes; TG curves; SEM and TEM images of Ni-MOFs and Co-MOFs; HRTEM image of and ; pore size distributions; high-resolution XPS spectra of C 1s and O 1s; UV–vis absorption spectra; selectivity for CO production; XRD pattern; TEM and HRTEM images of after photocatalytic reaction; and N2 sorption isotherm and CO2 adsorption isotherm (<a class="ext-link" href="/doi/suppl/10.1021/acs.inorgchem.1c01443/suppl_file/ic1c01443_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Co-pyrolysis of Chinese herb residue and polypropylene over Ni, Fe, Co and Cu/AC: Co-production and formation mechanism of carbon nanomaterials, liquid oil and pyrolysis gas

N-doped carbon carriers loaded with NiX (X = Fe, Co, Cu): Catalytic synergistic pyrolysis of herbal residues and polypropylene to generate three-phase products and carbon nanotubes

Production of catalytic-upgraded pyrolysis products from oiltea camellia shell and polypropylene using NiCe-X/Al2O3 and ZrO2 catalyst (X = Fe, Co)

Investigating the influences of metal-support interaction in NiFe catalysts on the quality of carbon nanomaterials from waste polypropylene

Carbon nanotubes production from catalytic pyrolysis of polyethylene over nickel-based catalysts: The influence of support materials

Simultaneous production of aromatics-rich bio-oil and carbon nanomaterials from catalytic co-pyrolysis of biomass/plastic wastes and in-line catalytic upgrading of pyrolysis gas

Conversion of Waste Plastic Packings to Carbon Nanomaterials: Investigation into Catalyst Material, Waste Type, and Product Applications

Co-production of Hydrogen and Carbon Nanotubes Via Catalytic Pyrolysis of Polyethylene over Fe/ZSM-5 Catalysts: Effect of Fe Loading on the Catalytic Activity

Pyrolysis gas from biomass and plastics over X-Mo@MgO (X = Ni, Fe, Co) catalysts into functional carbon nanocomposite: Gas reforming reaction and proper process mechanisms

Highly dispersed Co and Ni nanoparticles encapsulated in N-doped carbon nanotubes as efficient catalysts for the reduction of unsaturated oxygen compounds in aqueous phase

Microwave catalytic co-pyrolysis of Chlorella vulgaris and high density polyethylene over activated carbon supported monometallic: Characteristics and bio-oil analysis

Nickel Loaded on Carbon Materials Prepared From Co-pyrolysis of Biochar and Caking Coal for Catalytic Conversion of Volatiles

Synergistic modification of Ca/Co on Ni/HZSM-5 catalyst for pyrolysis of organic components in biomass tar

Synergistic Effects of Fe@C Catalysts Prepared at Different Carbonization Temperatures on Microwave Co-Pyrolysis of Biomass and Plastic for High-Value Oil and Gas Production

Investigation of a Ni-Modified MCM-41 Catalyst for the Reduction of Oxygenates and Carbon Deposits during the Co-Pyrolysis of Cellulose and Polypropylene

Preparation of Ni–Cu Catalyst for Carbon Nanofiber Production by the Mechanochemical Route

Promoting effects of Fe-Ni alloy on co-production of H2 and carbon nanotubes during steam reforming of biomass tar over Ni-Fe/α-Al2O3

Enhancement of hydrogen and carbon nanotubes production from hierarchical Ni/ZSM-5 catalyzed polyethylene pyrolysis

Co-pyrolysis of different torrefied Chinese herb residues and low-density polyethylene: Kinetic and products distribution

Highly Dispersive Ni@C and Co@C Nanoparticles Derived from Metal–Organic Monolayers for Enhanced Photocatalytic CO 2 Reduction

Hydrogen and CNT Production by Methane Cracking Using Ni–Cu and Co–Cu Catalysts Supported on Argan-Derived Carbon