Abstract:Inevitably increase in plastic demand has resulted in an overgrowing production on a global scale. The utilization of plastics has been applied to a number of industries as it is a durable, moldable, and inexpensive material. High exploitation of plastic had resulted in a hefty amount of waste production, which is not easy to recycle due to its non-degradable nature and results in landfills. Nowadays, waste to energy processes such as pyrolysis has emerged as a superlative process for the management of plastic waste by converting it into useful products. On the other hand, the employment of carbon nanotubes (CNT’s) has shown high growth in their production. CNT’s were generally synthesized from conventional gases like methane, ethane, and ethylene. Plastic waste can be utilized to substitute the feed material for the CNT synthesis via pyrolysis method. In this study, a two-step pyrolysis process was investigated for product recovery and CNT’s production. The first steps consisted of catalytic and non-catalytic degradation of mixed plastic waste in a vertical fixed bed reactor at 500 °C with a heating rate of 20 °C/min for the production of pyrolytic oil and gases and were analyzed. The second step consists of the employment of catalytic pyrolysis gases in a horizontal tube reactor maintained at a temperature of 800 °C over a bed of catalyst for the synthesis of CNT’s via catalytic vapor deposition (CVD) technique. It was established that the use of catalyst decreases the oil phase production from 80.5 to 64%, char from 9 to 6.5% while an increase in gas phase production from 10.5 to 29.5% was reported. The alteration of hydrocarbons to CNT’s was investigated via pre- and post-GC analysis of the gas samples. Post gas investigation indicates an increased concentration of hydrogen in the sample. Also, the decline of hydrocarbon gases concentration was observed in post sample analysis. Also, transmission electron microscopy (TEM) analysis confirms the synthesis of CNT’s.

Waste Plastic Thermal-Transformed CNT@Fe–Mo/MgO for Free Radical Activation and Bacteria Sterilization

Preparation of high quality carbon nanotubes by catalytic pyrolysis of waste plastics using FeNi-based catalyst

Microwave-carbon Fiber Cloth Co-Ignited Catalytic Degradation of Waste Plastic into High-Yield Hydrogen and Carbon Nanotubes

Pyrolysis gas from biomass and plastics over X-Mo@MgO (X = Ni, Fe, Co) catalysts into functional carbon nanocomposite: Gas reforming reaction and proper process mechanisms

Sustainable production of hydrogen and carbon nanotubes/nanofibers from plastic waste through microwave degradation

Product Selection Toward High-Value Hydrogen and Bamboo-Shaped Carbon Nanotubes from Plastic Waste by Catalytic Microwave Processing

Pyrolysis–catalysis upcycling of waste plastic using a multilayer stainless-steel catalyst toward a circular economy

Catalytic co-pyrolysis of waste tea residue and waste plastics to carbon nanomaterials: catalyst support, reaction temperature and product application

Microwave‐Driven Pyrolysis of Plastic Waste into Carbon Nanotubes and Hydrogen Using Spinel Ferrites

Carbon nanotubes production from real-world waste plastics and the pyrolysis behaviour

Production of Carbon Nanotubes Via Catalytic Pyrolysis of Waste Plastics over Ni/Al2O3 Catalyst: the Influence of Plastic Types

Production of carbon nanotubes via catalytic pyrolysis of waste plastics over Ni/Al 2 O 3 catalyst: The influence of plastic types

Coupling dechlorination and catalytic pyrolysis to produce carbon nanotubes from mixed polyvinyl chloride and polyethylene

Preparation of carbon nanotubes by catalytic pyrolysis of dechlorinated PVC

In-situ exsolution of Fe-Ni alloy catalysts for H2 and carbon nanotube production from microwave plasma-initiated decomposition of plastic wastes

Feasibilities of producing high-value carbon nanotubes from waste plastics by spray pyrolysis

Conventional pyrolysis of Plastic waste for Product recovery and utilization of pyrolytic gases for carbon nanotubes production

Waste plastics upcycled for high-efficiency H2O2 production and lithium recovery via Ni-Co/carbon nanotubes composites

Investigation of spherical alumina supported catalyst for carbon nanotubes production from waste polyethylene

Microwave-assisted pyrolysis of plastic waste with magnetic catalysts in a multi-ridge field compressed reactor

Conversion of Waste Plastic Packings to Carbon Nanomaterials: Investigation into Catalyst Material, Waste Type, and Product Applications