Abstract:The increasing rates of plastic production and waste plastic accumulation pose a serious challenge to the society, environment, and economy. Current mechanical recycling process is limited by the sorting/pretreatment of plastic waste and degradation of plastics during the process, which calls for more efficient recycling strategies. Catalytic microwave-assisted pyrolysis could serve as a feasible approach to chemical recycling of waste plastics and producing fuel and petrochemical feedstocks such as naphtha. This lecture presents a series of our recent work on the aspects of pyrolysis reactor design and catalyst development with the goal of advancing this technology towards industrial applications. A lab-scale continuous microwave-assisted pyrolysis system with a processing capacity of 200 kg plastics per day was developed, which features continuous downdraft operation and a mixing ball bed reactor. The incorporation of silicon carbide as microwave absorbents into the microwave heating process enabled fast, uniform and energy-efficient heating for the process. A baseline test of the system using conventional ZSM-5 catalyst obtained a 57 wt.% yield for C5-C22 liquid hydrocarbons from polyolefin-based plastics. Energy saving of the process compared to production of similar products from virgin materials was estimated to be 32% by using the Materials Flows through Industry supply chain analysis tool. In order the improve the yield and quality of the liquid hydrocarbon products, a series of catalysts were tested and compared on a lab-scale setting. Notably, relay catalysis of Al2O3 followed by ZSM-5 achieved up to 100% conversion into monoaromatics and C5-C12 alkanes/olefins at a catalyst to plastic ratio of 4:1; Y5.1, F20 zeolites and Al2O3 promoted the production of alkanes and alkenes mainly in the C5-C23 range; MCM-41 led to the formation of C13C23 alkanes and alkenes with a selectivity of 86.6%; ZSM-5 favored the production of aromatics with a selectivity of 70%. In addition to developing and selecting the proper catalyst material, the catalytic reactor also needs to be carefully designed such that sufficient heat and mass transfer within the catalyst bed is ensured during operation and the catalyst regeneration procedure can be conveniently practiced. Conventional designs such as the randomly packed bed could be problematic in the process since catalyst deactivation and coke/wax build-up is very likely. A probable solution to this issue is a structured catalytic reactor consisting of a structured packing with coated catalysts, e.g. ZSM-5 coatings on a SiC foam support. This structured catalyst has been tested in a lab-scale setting for upgrading pyrolytic vapours and results showed that it outperformed many other catalytic reactor designs in terms of catalytic activity and stability. In addition, the composite catalysts could be regenerated and reused while well preserving its material properties and catalytic activity after multiple reaction-regeneration cycles.

Microwave‐Driven Pyrolysis of Plastic Waste into Carbon Nanotubes and Hydrogen Using Spinel Ferrites

Sustainable production of hydrogen and carbon nanotubes/nanofibers from plastic waste through microwave degradation

Microwave-carbon Fiber Cloth Co-Ignited Catalytic Degradation of Waste Plastic into High-Yield Hydrogen and Carbon Nanotubes

Microwave-assisted pyrolysis of plastic waste with magnetic catalysts in a multi-ridge field compressed reactor

In-situ exsolution of Fe-Ni alloy catalysts for H2 and carbon nanotube production from microwave plasma-initiated decomposition of plastic wastes

Product Selection Toward High-Value Hydrogen and Bamboo-Shaped Carbon Nanotubes from Plastic Waste by Catalytic Microwave Processing

Microwave-intensified catalytic upcycling of plastic waste into hydrogen and carbon nanotubes over self-dispersing bimetallic catalysts

Catalytic microwave-assisted pyrolysis for chemical recycling of plastic waste

Catalytic pyrolysis of plastic waste using metal-incorporated activated carbons for monomer recovery and carbon nanotube synthesis

A high-quality hydrogen production strategy from waste plastics through microwave-assisted reactions with heterogeneous bimetallic iron/nickel/cerium catalysts

Conversion of Waste Plastic Packings to Carbon Nanomaterials: Investigation into Catalyst Material, Waste Type, and Product Applications

Preparation of high quality carbon nanotubes by catalytic pyrolysis of waste plastics using FeNi-based catalyst

Waste Plastic Thermal-Transformed CNT@Fe–Mo/MgO for Free Radical Activation and Bacteria Sterilization

Pyrolysis gas from biomass and plastics over X-Mo@MgO (X = Ni, Fe, Co) catalysts into functional carbon nanocomposite: Gas reforming reaction and proper process mechanisms

Pyrolysis-catalysis of different waste plastics over Fe/Al2O3 catalyst: High-value hydrogen, liquid fuels, carbon nanotubes and possible reaction mechanisms

Constructing bifunctional porous nanosheets for efficient conversion of waste plastics into valuable hydrogen and carbons

Catalytic pyrolysis of plastic wastes in a continuous microwave assisted pyrolysis system for fuel production

Co-production of Hydrogen and Carbon Nanotubes Via Catalytic Pyrolysis of Polyethylene over Fe/ZSM-5 Catalysts: Effect of Fe Loading on the Catalytic Activity

Microwave-assisted catalytic technology for sustainable production of valuable chemicals from plastic waste with enhanced catalyst reusability

Catalytic co-pyrolysis of waste tea residue and waste plastics to carbon nanomaterials: catalyst support, reaction temperature and product application

Temperature-dependent highly active LaCaMgAl2O4 catalyst effect on carbon nanomaterial and hydrogen generation from polymethyl methacrylate plastic