Abstract:Inevitably increase in plastic demand has resulted in an overgrowing production on a global scale. The utilization of plastics has been applied to a number of industries as it is a durable, moldable, and inexpensive material. High exploitation of plastic had resulted in a hefty amount of waste production, which is not easy to recycle due to its non-degradable nature and results in landfills. Nowadays, waste to energy processes such as pyrolysis has emerged as a superlative process for the management of plastic waste by converting it into useful products. On the other hand, the employment of carbon nanotubes (CNT’s) has shown high growth in their production. CNT’s were generally synthesized from conventional gases like methane, ethane, and ethylene. Plastic waste can be utilized to substitute the feed material for the CNT synthesis via pyrolysis method. In this study, a two-step pyrolysis process was investigated for product recovery and CNT’s production. The first steps consisted of catalytic and non-catalytic degradation of mixed plastic waste in a vertical fixed bed reactor at 500 °C with a heating rate of 20 °C/min for the production of pyrolytic oil and gases and were analyzed. The second step consists of the employment of catalytic pyrolysis gases in a horizontal tube reactor maintained at a temperature of 800 °C over a bed of catalyst for the synthesis of CNT’s via catalytic vapor deposition (CVD) technique. It was established that the use of catalyst decreases the oil phase production from 80.5 to 64%, char from 9 to 6.5% while an increase in gas phase production from 10.5 to 29.5% was reported. The alteration of hydrocarbons to CNT’s was investigated via pre- and post-GC analysis of the gas samples. Post gas investigation indicates an increased concentration of hydrogen in the sample. Also, the decline of hydrocarbon gases concentration was observed in post sample analysis. Also, transmission electron microscopy (TEM) analysis confirms the synthesis of CNT’s.

Production of carbon nanotubes via catalytic pyrolysis of waste plastics over Ni/Al 2 O 3 catalyst: The influence of plastic types

Production of Carbon Nanotubes Via Catalytic Pyrolysis of Waste Plastics over Ni/Al2O3 Catalyst: the Influence of Plastic Types

Pyrolysis-catalysis of different waste plastics over Fe/Al2O3 catalyst: High-value hydrogen, liquid fuels, carbon nanotubes and possible reaction mechanisms

Carbon nanotubes production from catalytic pyrolysis of polyethylene over nickel-based catalysts: The influence of support materials

Carbon nanotubes from post-consumer waste plastics: Investigations into catalyst metal and support material characteristics

Preparation of high quality carbon nanotubes by catalytic pyrolysis of waste plastics using FeNi-based catalyst

Preparation of High-Value Carbon Nanotubes from Real Waste Plastic Towards the Negative Carbon Technology

Investigation of spherical alumina supported catalyst for carbon nanotubes production from waste polyethylene

Carbon nanotubes production from real-world waste plastics and the pyrolysis behaviour

Production of carbon nanotubes via catalytic pyrolysis of polyethylene over Ni/ZSM-5 prepared by ethylene glycol assisted impregnation

Preparation of Easily-Stripped and High-Purity Carbon Nanotubes from Various Waste Plastics

Co-production of Hydrogen and Carbon Nanotubes from Real-World Waste Plastics: Influence of Catalyst Composition and Operational Parameters

Simultaneous production of high-valued carbon nanotubes and hydrogen from catalytic pyrolysis of waste plastics: The role of cellulose impurity

A Novel Nickel Catalyst Supported on Coal Gangue for Producing Hydrogen and Carbon Nanotubes from Waste Plastics

Enhancement of hydrogen and carbon nanotubes production from hierarchical Ni/ZSM-5 catalyzed polyethylene pyrolysis

Feasibilities of producing high-value carbon nanotubes from waste plastics by spray pyrolysis

Conventional pyrolysis of Plastic waste for Product recovery and utilization of pyrolytic gases for carbon nanotubes production

Catalytic Synthesis of Carbon Nanotubes and Hydrogen Gas from Waste Plastics Using LaNiO3 Perovskite Catalyst

Identify the impact of pyrolysis temperature on preparation of carbon nanotubes by catalytic reforming polypropylene

Catalytic Synthesis of Carbon Nanotubes and Hydrogen Gas from Waste Plastics Using LaNiO 3 Perovskite Catalyst

Converting polyolefin plastics into few-walled carbon nanotubes via a tandem catalytic process: Importance of gas composition and system configuration