Abstract:Biobased plastics have the potential to be sustainable, but to explore their circularity further, current end-of-life options need to be broadened. Mechanical recycling is one of the most accepted methods to bring back plastics into the loop. Polyhydroxybutyrates (PHBs) are biobased and biodegradable in nature with promising properties and varied applications in the market. This study focuses on their potential for mechanical recycling by multiple extrusion cycles (E1-E5) and multi-faceted characterization of the virgin (V) and reprocessed materials from E1 to E5. The behavior is compared to polypropylene (PP) as a reference with a similar property profile, which has also been reprocessed five times. The thermal properties of both series showed a stable melting point and thermal decomposition temperature from thermal analyses (differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA)). However, a steady increase in the degree of crystallinity was observed which could counterbalance the decrease in molecular weight due to repeated extrusion measured by gel permeation chromatography and resulted in similar values of tensile strength across the cycles. The strain at break was impacted after the first extrusion, but no significant change was observed thereafter; the same was observed for impact strength. Even in scanning electron microscopy (SEM) images, virgin and E5 samples appeared similar, showing the stability of morphological characteristics. Fourier transform infrared spectroscopy (FTIR) results revealed that no new groups are being formed even on repeated processing. The deviation between the PHB and PP series was more predominant in the melt mass flow rate (MFR) and rheology studies. There was a drastic drop in the MFR values in PHB from virgin to E5, whereas not much difference was observed for PP throughout the cycles. This observation was corroborated by frequency sweeps conducted with the parallel plate method. The viscosity dropped from virgin to E1 and E2, but from E3 to E5 it presented similar values. This was in contrast to PP, where all the samples from virgin to E5 had the same values of viscosity. This paper highlights the possibilities of mechanical recycling of PHB and explains why future work with the addition of virgin material and other additives is an area to be explored.

Thermoformed products from high-density polyethylene and Softwood kraft pulp

Characteristics of paper mill sludge-wood fiber-high-density polyethylene composites

Thermo-mechanical recycling via ultrahigh-speed extrusion of film-grade recycled LDPE and injection molding

Selected properties of MDF boards bonded with various fractions of recycled HDPE particles

Polypropylene Post-Consumer Recyclate Compounds for Thermoforming Packaging Applications

Extrusion and thermoforming of poly(butylene succinate–co‐butylene adipate)/poly(3–hydroxybutyrate–co–3–hydroxyhexanoate) bio‐based blends for the fabrication of disposable packaging

Enhanced performance of recycled polyethylene-integrated trilayer low-density polyethylene/linear low-density polyethylene heat-shrink films for brick packaging: A comprehensive study

Degradable Foam Tray Based on High-concentration Dispersed Cellulose Fibers Obtained by a Hot-press Baking Process

Valorisation of waste pulp from materials recovery facility rejects for composite applications

From Nautical Waste to Additive Manufacturing: Sustainable Recycling of High-Density Polyethylene for 3D Printing Applications

Thermo-physical and mechanical characteristics of composites based on high-density polyethylene (HDPE) e spent coffee grounds (SCG)

Chemical upcycling of high-density polyethylene into upcycled waxes as rheology modifiers and paper coating materials

Rheological and Functional Properties of Mechanically Recycled Post-Consumer Rigid Polyethylene Packaging Waste

Evaluation of new safety decontamination approaches at lab scale for recycled highdensity polyethylene (rHDPE) intended for food contact

Sustainable paper-based packaging from hemp hurd fiber: A potential material for thermoformed molded fiber packaging

Feasibility of incorporating recycled multilayer LDPE/EVOH films into flexible packaging

Polylactic acid/polycaprolactone/sawdust based biocomposites trays with enhanced compostability

Impact of Multiple Reprocessing on Properties of Polyhydroxybutyrate and Polypropylene

Valorization of Potential Post-Consumer Polyethylene (PE) Plastics Waste and Ethiopian Indigenous Highland Bamboo (EHB) for Wood Plastic Composite (WPC): Experimental Evaluation and Characterization

Recycling high impact polystyrene: Material properties and reprocessing in a circular economy business model

Sustainable Utilization of Waste Printed Circuit Boards Powders in Hdpe-Wood Composites: Synergistic Effects of Multicomponents on Structure and Properties