Abstract:In order to limit the ever-increasing consumption of new resources for material formulations, regulations and legislation require us to move from a linear to a circular economy and to find efficient ways to recycle, reuse and recover materials. Taking into account the principles of material circularity and waste reuse, this research study aims to produce thermoplastic composites using two types of industrial waste from neighbouring companies, namely waste polypropylene (wPP) from household production and carbon-fibre-reinforced epoxy composite scrap from a pultrusion company. The industrial scrap of the carbon-fibre-reinforced epoxy composites was either machined/ground to powder (pCFRC) and used directly as a reinforcement agent or subjected to a chemical digestion process to recover the carbon fibres (rCFs). Both pCFRC and rCF, at different weight ratios, were melt-blended with wPP. Prior to melt blending, both pCFRC and rCF were analysed for morphology by scanning electron microscopy (SEM). The pCFRC powder contains epoxy resin fragments with spherical to ellipsoidal shape and carbon fibre fragments. The rCFs are clean from the matrix, but they are slightly thicker and corrugated after the matrix digestion. Further, the morphologies of wPP/pCFRC and wPP/rCF were also investigated by SEM, while the thermal behaviour, i.e., transitions and changes in crystallinity, and thermal resistance were evaluated by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA), respectively. The strength of the interaction between the filler (i.e., pCFRC or rCF) and the wPP matrix and the processability of these composites were assessed by rheological studies. Finally, the mechanical properties of the systems were characterised by tensile tests, and as found, both pCFRC and rCF exert reinforcement effects, although better results were obtained using rCF. The wPP/pCFRC results are more heterogeneous than those of the wPP/rCF due to the presence of epoxy and carbon fibre fragments, and this heterogeneity could be considered responsible for the mechanical behaviour. Further, the presence of both pCFRC and rCF leads to a restriction of polymer chain mobility, which leads to an overall reduction in ductility. All the results obtained suggest that both pCFRC and rCF are good candidates as reinforcing fillers for wPP and that these complex systems could potentially be processed by injection or compression moulding.

Valorisation of waste pulp from materials recovery facility rejects for composite applications

Development of PLA–Waste Paper Biocomposites with High Cellulose Content

Diverted from landfill: Manufacture and characterisation of composites from waste plastic packaging and waste glass fibres

The Reinforcing Effect of Waste Corrugated Paper Fiber on Polylactic Acid

Sustainable Composites from Waste Polypropylene Added with Thermoset Composite Waste or Recovered Carbon Fibres

Characteristics of paper mill sludge-wood fiber-high-density polyethylene composites

It's not waste, it's a resource: Utilizing industrial waste fibers/mineral fillers to attain flame retardant biocomposites

Preparation and Properties of Waste Corrugated Paper Fiber/Polylactic Acid Co-Extruded Composite

Sustainable upcycling of plastic waste and wood fibers into high-performance laminated wood-polymer composite via one-step cell collapse and chemical bonding approach

Mechanical, Thermal and Morphological Study of Bio-Based PLA Composites Reinforced with Lignin-Rich Agri-Food Wastes for Their Valorization in Industry

High-value utilization method of digital printing waste paper fibers-Co-blending filled HDPE composites and performance improvement

Environmentally-friendly solvent pulping and grafting strategies for better foamability of poly(lactic acid)/agricultural waste biocomposites

A viable strategy to recycle post-used carbon fiber thermoset composites as a multi-functional filler for PP composites

Synergistic reinforcing effect of fly ash and powdered wood chips on the properties of polypropylene hybrid composites

Preparation and Characterization of Waste Cotton Fabric Reinforced Polylactic Acid Green Composites with Multifunctional Properties in a Low-Carbon Process

Preparation and Characterisation of Composites from Industrial Waste: Wood Flour and Expanded Ethylene Vinyl Acetate

Utilization of Fibrous Mat Residues from Upholstered Furniture as Sustainable Fillers in Plywood Production

Reuse of Steel Residue in Polypropylene Matrices for the Production of Plastic Wood, Aiming at Decarbonization

Valorization of Agro-Wastes as Fillers in PLA-Based Biocomposites for Increasing Sustainability in Fused Deposition Modeling Additive Manufacturing

Sustainable valorization of recycled low-density polyethylene and cocoa biomass for composite production

Mechanical recycling process: An alternative for a viable disposal of carbon fiber‐reinforced thermoplastic waste