Abstract:Biological treatment of spent coffee grounds using P. Chrysosporium and A. Niger. In this study, the mechanical and morphological characteristics of poly(hydroxyalkanoate) (PHA)/poly(lactic acid) (PLA) blend matrix reinforced with spent coffee ground (SCG) were investigated across various weight ratios (100/0, 75/25, 50/50, 25/75, and 0/100) and SCG contents (10–40 wt%). SEM micrographs revealed a phase‐separated structure with cracks on the fracture surface, consistent with the lower flexural properties of biocomposites. The incorporation of SCG reduced mechanical properties, mainly due to its incompatibility with the PHA/PLA matrix. Biocomposites with high SCG content demonstrated lower energy absorption capabilities, likely due to SCG aggregates acting as stress concentrators and disrupting load‐transferring mechanisms. Moreover, increasing PHA content in the blends led to higher PLA crystallinity, as PHA acted as a nucleating agent for PLA. For biological treatment, biocomposites with PHA/PLA ratio (50/50) and SCG loading (20 wt%) were employed. The microscopic analysis highlighted well‐dispersed treated SCG within the matrix and improved interfacial contact. Biocomposites with treated SCG demonstrated remarkable enhancements of 52% and 113% in flexural strength and modulus, respectively. These findings proved the effectiveness of sustainable fungal treatment in enhancing interfacial adhesion and improving the mechanical performance of biocomposites. Highlights Percentage of SCG in bioplastic blend as a significant effect on the flexural properties and impact strength. The ratio of the bioplastic blend has the strong influence on the flexural properties and impact properties. Biological treatment of SCG has improved the interfacial interaction between SCG and bioplastic blend. The treated SCG has rougher surface which facilitates the interfacial locking between bioplastic blend and treated SCG. The biological treatment of SCG has improved the mechanical properties of the composites.

Thermo-physical and mechanical characteristics of composites based on high-density polyethylene (HDPE) e spent coffee grounds (SCG)

Fabrication of biopolyethylene-based biocomposites with coffee ground waste: Effect of polyethylene-graft-maleic anhydride

Effect of Spent Coffee Grounds on the Crystallinity and Viscoelastic Behavior of Polylactic Acid Composites

Utilization of spent coffee grounds as fillers to prepare polypropylene composites for food packaging applications

Hybrid Biocomposites Based on Used Coffee Grounds and Epoxy Resin: Mechanical Properties and Fire Resistance

Evaluation of Physico-Mechanical Properties on Oil Extracted Ground Coffee Waste Reinforced Polyethylene Composite

The biocomposites properties of compounded poly(lactic acid) with untreated and treated spent coffee grounds

Spent coffee Grounds/Poly(butylene succinate) biocomposites with Robust mechanical property and heat resistance via reactive compatibilization

Surface Treatments of Coffee Husk Fiber Waste for Effective Incorporation into Polymer Biocomposites

The effect of filler loading, biological treatment, and bioplastic blend ratio on flexural and impact properties of blended bioplastic reinforced with spent coffee ground

The Physical Properties and Crystallization Kinetics of Biocomposite Films Based on PLLA and Spent Coffee Grounds

Recycled Green PE Composites Reinforced with Woven and Randomly Arranged Sisal Fibres Processed by Hot Compression Moulding

Study of Mechanical and Thermal Properties of Environmentally Friendly Composites from Beer Bagasse

Fabrication of biodegradable films with UV-blocking and high-strength properties from spent coffee grounds

Value‐added use of spent coffee ground for low‐cost poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) biocomposite development

Utilization of Spent Coffee Grounds as a Sustainable Resource for the Synthesis of Bioplastic Composites with Polylactic Acid, Starch, and Sucrose

Preparation and characterization of coffee hull fiber for reinforcing application in thermoplastic composites

Preparation and characterization of a sustainable foamed biocomposite from compatibilized recycled polyethylene and agave fiber

Effective Synergistic Effect of Treatment and Modification on Spent Coffee Grounds for Sustainable Biobased Composites

Sustainable valorization of recycled low-density polyethylene and cocoa biomass for composite production

Biocomposites Based on Wheat Flour with Urea-Based Eutectic Plasticizer and Spent Coffee Grounds: Preparation, Physicochemical Characterization, and Study of Their Influence on Plant Growth