Abstract:Biobased plastics have the potential to be sustainable, but to explore their circularity further, current end-of-life options need to be broadened. Mechanical recycling is one of the most accepted methods to bring back plastics into the loop. Polyhydroxybutyrates (PHBs) are biobased and biodegradable in nature with promising properties and varied applications in the market. This study focuses on their potential for mechanical recycling by multiple extrusion cycles (E1-E5) and multi-faceted characterization of the virgin (V) and reprocessed materials from E1 to E5. The behavior is compared to polypropylene (PP) as a reference with a similar property profile, which has also been reprocessed five times. The thermal properties of both series showed a stable melting point and thermal decomposition temperature from thermal analyses (differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA)). However, a steady increase in the degree of crystallinity was observed which could counterbalance the decrease in molecular weight due to repeated extrusion measured by gel permeation chromatography and resulted in similar values of tensile strength across the cycles. The strain at break was impacted after the first extrusion, but no significant change was observed thereafter; the same was observed for impact strength. Even in scanning electron microscopy (SEM) images, virgin and E5 samples appeared similar, showing the stability of morphological characteristics. Fourier transform infrared spectroscopy (FTIR) results revealed that no new groups are being formed even on repeated processing. The deviation between the PHB and PP series was more predominant in the melt mass flow rate (MFR) and rheology studies. There was a drastic drop in the MFR values in PHB from virgin to E5, whereas not much difference was observed for PP throughout the cycles. This observation was corroborated by frequency sweeps conducted with the parallel plate method. The viscosity dropped from virgin to E1 and E2, but from E3 to E5 it presented similar values. This was in contrast to PP, where all the samples from virgin to E5 had the same values of viscosity. This paper highlights the possibilities of mechanical recycling of PHB and explains why future work with the addition of virgin material and other additives is an area to be explored.

Feasibility of incorporating recycled multilayer LDPE/EVOH films into flexible packaging

Toward mechanical recyclability of high barrier food packaging films through filler incorporation on the EVOH layer

Impact of thermomechanical reprocessing on multilayer plastic packaging blend

Thermo-mechanical recycling via ultrahigh-speed extrusion of film-grade recycled LDPE and injection molding

Recycling Polyethylene/Polyamide Multilayer Films with Poly(isoprene-g-Maleic Anhydride) Compatibilizer

Comparative Analysis of the Effects of Incorporating Post-Industrial Recycled LLDPE and Post-Consumer PE in Films: Macrostructural and Microstructural Perspectives in the Packaging Industry

Correlation of structure, rheological, thermal, mechanical, and optical properties in Low Density Polyethylene/Linear Low Density Polyethylene blends in the presence of recycled Low Density Polyethylene and Linear Low Density Polyethylene

Biodegradable Polymer Films: Processability, Technological Properties and Their Viability for Flexible Packaging Applications

Enhanced performance of recycled polyethylene-integrated trilayer low-density polyethylene/linear low-density polyethylene heat-shrink films for brick packaging: A comprehensive study

Delamination and Evaluation of Multilayer PE/Al/PET Packaging Waste Separated Using a Hydrophobic Deep Eutectic Solvent

Engineering material from flexible food packaging waste: Property profile and feasibility

Development of Technologies for Processing Polypropylene Foil Waste and Their Use in the Production of Finished Products

Recyclability of PET/WPI/PE Multilayer Films by Removal of Whey Protein Isolate-Based Coatings with Enzymatic Detergents

Impact of molecular architecture and draw ratio on enhancement of targeted mechanical properties of machine direction orientation-polyethyene films produced after blown film extrusion

Quality evaluation and economic assessment of an improved mechanical recycling process for post-consumer flexible plastics

Development of Novel Blown Shrink Films from Poly(Lactide)/Poly(Butylene-Adipate-co-Terephthalate) Blends for Sustainable Food Packaging Applications

Development of extrusion blown films of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) blends for flexible packaging

Analysis of thermomechanical reprocessing effects on polypropylene/ethylene octene copolymer blends

Mechanical and Thermal Degradation-Related Performance of Recycled LDPE from Post-Consumer Waste

Mechanical recycling of printed flexible plastic packaging: The role of binders and pigments

Impact of Multiple Reprocessing on Properties of Polyhydroxybutyrate and Polypropylene