Abstract:Polymers generally form incompatible mixtures that make the process of recycling difficult, especially the mechanical recycling of mixed plastic waste. One of the most commonly used films in the packaging industry is multilayer films, mainly composed of polyethylene (PE) and polyamide (PA). Recycling these materials with such different molecular structures requires the use of compatibilizers to minimize phase separation and obtain more useful recycled materials. In this work, commercial polyisoprene–graft–maleic anhydride (PI-g-MA) was tested as a compatibilizer for a blend of PE and PA derived from the mechanical recycling of PE/PA multilayer films. Different amounts of PI-g-MA were tested, and the films made with 1.5% PI-g-MA showed the best results in terms of mechanical properties and dart impact. The films were also characterized thermally via thermogravimetric analysis (TG) and differential scanning calorimetry (DSC), using Fourier-transform infrared spectroscopy (FTIR), and morphologically using a scanning electron microscope (SEM). Other parameters, such as tearing and perforation, were analyzed.

What problem does this paper attempt to address?

### Problems the paper attempts to solve This paper aims to solve the compatibility problems encountered in the mechanical recycling process of multi - layer polyethylene (PE)/polyamide (PA) films. Specifically: 1. **Recycling challenges of multi - layer films**: - Multi - layer films are widely used in the packaging industry, but due to the incompatibility between different polymer layers, these materials are difficult to recycle. - The recycled materials usually exhibit poor mechanical properties and barrier effects, far below the performance of the original materials. 2. **Using compatibilizers to improve the performance of recycled materials**: - In order to improve the performance of recycled materials, researchers tested commercial polyisoprene - graft - maleic anhydride (PI - g - MA) as a compatibilizer. - The role of the compatibilizer is to reduce the phase separation between different polymers and improve the mechanical properties and thermal stability of recycled materials. 3. **Experimental design and results**: - Researchers mechanically recycled PE/PA multi - layer films and added different proportions of PI - g - MA (1.5%, 3% and 6%) to the mixture. - The experimental results show that the film with 1.5% PI - g - MA added performs best in mechanical properties and drop - weight impact tests. - The films were characterized by thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), Fourier - transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) to evaluate their thermal stability and microstructure. ### Main conclusions - **Effect of compatibilizer**: PI - g - MA as a compatibilizer significantly improves the mechanical properties and thermal stability of PE/PA mixtures. - **Optimal addition amount**: 1.5% of PI - g - MA is the optimal addition amount, which can effectively improve the performance of recycled materials. - **Microstructure change**: SEM images show that the addition of PI - g - MA reduces phase separation and makes the microstructure of the material more uniform. Through these studies, the paper provides a new solution for the efficient recycling of multi - layer PE/PA films, which helps to promote the sustainable development of the plastic packaging industry.

Recycling Polyethylene/Polyamide Multilayer Films with Poly(isoprene-g-Maleic Anhydride) Compatibilizer

A Promising Recycling Strategy via Processing Polypropylene/Recycled Poly(ethylene terephthalate): Reactive Extrusion Using Dual Compatibilizers

Feasibility of incorporating recycled multilayer LDPE/EVOH films into flexible packaging

Detailed comparison of compatibilizers MAPE and SEBS-g-MA on the mechanical/thermal properties, and morphology in ternary blend of recycled PET/HDPE/MAPE and recycled PET/HDPE/SEBS-g-MA

High-strength and super-tough PA6/PS/PP/SEBS quaternary blends compatibilized by using a highly effective multi-phase compatibilizer: Toward efficient recycling of waste plastics

Structures of the co‐branching reactive products of isotactic polypropylene with high‐density polyethylene and the effect on the in situ compatibilization of mixed recycled materials

Thermo-mechanical recycling via ultrahigh-speed extrusion of film-grade recycled LDPE and injection molding

Morphological, Thermal, and Mechanical Characterization of Bio-Based High-Density Polyethylene / Biopolyamide 6.10 Blends Compatibilized with PE and SEBS Functionalized With Maleic Anhydride

Development of Technologies for Processing Polypropylene Foil Waste and Their Use in the Production of Finished Products

Recycled polyethylene/polyethylene‐ethylene‐1‐octene‐maleic anhydride composite with improved mechanical properties

Enhanced performance of recycled polyethylene-integrated trilayer low-density polyethylene/linear low-density polyethylene heat-shrink films for brick packaging: A comprehensive study

i PP/HDPE blends compatibilized by a polyester: An unconventional concept to valuable products

Hybrid Chemomechanical Plastics Recycling: Solvent-free, High-Speed Reactive Extrusion of Low-Density Polyethylene

In Situ Compatibilization of Isotactic Polypropylene and High-Density Polyethylene by a Melt Cobranching Reaction

Compatibility study of recycled Polypropylene (PP)/Poly(ethylene terephthalate) (PET) blends nanocomposites with PP‐g‐MAH: Modeling of twin screw extrusion

Melting Temperature Depression of Polymer Single Crystals: Application to the Eco-Design of Tie-Layers in Polyolefinic-Based Multilayered Films

Toward the production of bioblends for the automotive sector: Reuse of recycled polyamide 6,6 to prepare super‐tough biopolyethylene

Comparative Analysis of the Effects of Incorporating Post-Industrial Recycled LLDPE and Post-Consumer PE in Films: Macrostructural and Microstructural Perspectives in the Packaging Industry

From Waste Vegetable Oil to a Green Compatibilizer for HDPE/PA6 Blends

Blending of Low-Density Polyethylene and Poly(Butylene Succinate) (LDPE/PBS) with Polyethylene–Graft–Maleic Anhydride (PE–g–MA) as a Compatibilizer on the Phase Morphology, Mechanical and Thermal Properties

The Development of Sustainable Polyethylene Terephthalate Glycol-Based (PETG) Blends for Additive Manufacturing Processing—The Use of Multilayered Foil Waste as the Blend Component