i PP/HDPE blends compatibilized by a polyester: An unconventional concept to valuable products

Jakub Kruszynski,Weronika Nowicka,Artur Rozanski,Yingxin Liu,Daniele Parisi,Lanti Yang,Farhan Ahmad Pasha,Miloud Bouyahyi,Lidia Jasinska-Walc,Rob Duchateau

DOI: https://doi.org/10.1126/sciadv.ado1944

IF: 13.6

2024-05-24

Science Advances

Abstract:Polyolefins are the most widely used plastics accounting for a large fraction of the polymer waste stream. Although reusing polyolefins seems to be a logical choice, their recycling level remains disappointingly low. This is mainly due to the lack of large-scale availability of efficient and inexpensive compatibilizers for mixed polyolefin waste, typically consisting of high-density polyethylene (HDPE) and isotactic polypropylene ( i PP) that, despite their similar chemical hydrocarbon structure, are immiscible. Here, we describe an unconventional approach of using polypentadecalactone, a straightforward and simple-to-produce aliphatic polyester, as a compatibilizer for i PP/HDPE blends, especially the brittle i PP-rich ones. The unexpectedly effective compatibilizer transforms brittle i PP/HDPE blends into unexpectedly tough materials that even outperform the reference HDPE and i PP materials. This simple approach creates opportunities for upcycling polymer waste into valuable products.

multidisciplinary sciences

What problem does this paper attempt to address?

The paper mainly addresses the following issues: 1. **Background Issue**: Polyolefins (such as high-density polyethylene HDPE and isotactic polypropylene iPP) are among the most commonly used plastics, constituting a significant portion of polymer waste streams. Although recycling these polyolefins seems like a reasonable choice, their actual recycling rates remain low. This is primarily due to the lack of widely available and cost-effective compatibilizers to handle mixed polyolefin waste, especially for HDPE and iPP mixed waste. 2. **Specific Issue**: Although HDPE and iPP have similar chemical structures, their incompatibility leads to the formation of different phases when mixed, thereby affecting mechanical properties. The currently used compatibilizers (such as block or graft copolymers) are complex to synthesize and costly, limiting their large-scale production and widespread application. 3. **Solution**: The paper proposes an unconventional approach using poly(15-pentadecalactone) (PPDL) as a compatibilizer for HDPE/iPP mixtures. PPDL is a simple, easy-to-produce aliphatic polyester that can effectively improve the mechanical properties of the mixture, transforming the brittle HDPE/iPP mixture into a tough material with performance even superior to pure HDPE and iPP. In summary, the paper aims to address the effective recycling of mixed polyolefin waste (especially HDPE and iPP) by developing a simple and cost-effective compatibilizer (PPDL). This approach is expected to increase the reuse rate of polyolefin waste and convert it into high-value-added products.

i PP/HDPE blends compatibilized by a polyester: An unconventional concept to valuable products

Oxidative Upcycling of Polyolefin Wastes into the Dynamically Cross-Linked Elastomer

Enhanced Multiphase Interfacial Interaction of Impact Polypropylene Copolymer by In-Situ Introducing Polyethylene

In Situ Compatibilization of Isotactic Polypropylene and High-Density Polyethylene by a Melt Cobranching Reaction

A Promising Recycling Strategy via Processing Polypropylene/Recycled Poly(ethylene terephthalate): Reactive Extrusion Using Dual Compatibilizers

Compatibilization of polyolefin blends through acid–base interactions

Structures of the co‐branching reactive products of isotactic polypropylene with high‐density polyethylene and the effect on the in situ compatibilization of mixed recycled materials

High-strength and super-tough PA6/PS/PP/SEBS quaternary blends compatibilized by using a highly effective multi-phase compatibilizer: Toward efficient recycling of waste plastics

Review on modification strategies of polyethylene/polypropylene immiscible thermoplastic polymer blends for enhancing their mechanical behavior

Oxidization and Chain‐Branching Reaction for Recycling HDPE and Mixed HDPE/PP with In‐situ Compatibilization by Ozone‐Induced Reactive Extrusion

From Waste Vegetable Oil to a Green Compatibilizer for HDPE/PA6 Blends

Unlocking superior properties in polypropylene/polyethylene terephthalate (PP/PET) blends using an ethylene-butylene-acrylate terpolymer reactive compatibilizer

A Vitrimer Acts as a Compatibilizer for Polyethylene and Polypropylene Blends

Rheological Insights into the Degradation Behavior of PP/HDPE Blends

Development of Technologies for Processing Polypropylene Foil Waste and Their Use in the Production of Finished Products

Dynamic crosslinking compatibilizes immiscible mixed plastics

Linear, Graft, and Beyond: Multiblock Copolymers as Next-Generation Compatibilizers

Morphological analysis of mechanically recycled blends of high density polyethylene and polypropylene with strong difference in melt flow index

Blending of Low-Density Polyethylene and Poly(Butylene Succinate) (LDPE/PBS) with Polyethylene–Graft–Maleic Anhydride (PE–g–MA) as a Compatibilizer on the Phase Morphology, Mechanical and Thermal Properties

Advancing the Characterization of Recycled Polyolefin Blends with a Combined Experimental and Numerical Approach to Thermomechanical Behavior

High-Value Recycling of Isotactic Polypropylene-Based Plastic Waste as a Crystallization Promoter for High-Performance Polypropylene Random Copolymers