Abstract:Waste polyethylene is blended and pulverized before adding a crosslinking agent via dry‐blending to produce parts via rotational molding. Polyethylene (PE), including high‐density polyethylene (HDPE) and low‐density polyethylene (LDPE), makes up a significant part of post‐consumer plastics in municipal solid waste, presenting challenges for traditional recycling methods due to a wide range of melt flow properties and poor interfacial adhesion between the different resin, which often leads to low quality products (downcycling). In this study, a method is proposed to modify the molecular structure of post‐consumer PE (rHDPE and rLDPE) and their blends by using a straightforward organic peroxide crosslinking technique with 1 phr of dicumyl peroxide (DCP). Different rHDPE/rLDPE blend weight ratios (0/100, 20/80, 40/60, 50/50, 60/40, 80/20, and 100/0) were prepared using a combination of co‐rotating twin‐screw extrusion and pulverization. The final parts were produced via rotomolding where both the forming and crosslinking processes occurred concurrently. Subsequently, the materials were characterized in terms of chemical, thermal, and mechanical properties. It was found that the tensile strength (228%), tensile modulus (345%), flexural strength (145%), and flexural modulus (251%) increased by crosslinking the 80% wt. rHDPE (x‐rHDPE). Conversely, the gel content increased by 17%, thermal resistance by 37.2%, and the impact strength by 93% with 80% wt. rLDPE (x‐rLDPE). It can be concluded that a balance between the properties occurs as the addition of DCP improved both the interfacial adhesion and melt properties of rHDPE/rLDPE blends. This innovative approach represents a simple and straightforward method to upcycle mixed plastics (PE) streams, especially for rotomolding applications. It also offers promising avenues for sustainable waste management and material reuse.

Oxidization and Chain‐Branching Reaction for Recycling HDPE and Mixed HDPE/PP with In‐situ Compatibilization by Ozone‐Induced Reactive Extrusion

Oxidative Upcycling of Polyolefin Wastes into the Dynamically Cross-Linked Elastomer

Chemical Recycling of Polyolefin Waste: from the Perspective of Efficient Pyrolysis Reactors

Structures of the co‐branching reactive products of isotactic polypropylene with high‐density polyethylene and the effect on the in situ compatibilization of mixed recycled materials

In Situ Compatibilization of Isotactic Polypropylene and High-Density Polyethylene by a Melt Cobranching Reaction

Ozone-based in-situ reactive extrusion for rapid functionalisation and degradation of low density polyethylene

Controlled functionalisation of PE in molten state using ozone at the gas-fluid interface

Functionalization of molten polyethylene by ozonization and its application in wood fiber reinforced polyethylene composites

i PP/HDPE blends compatibilized by a polyester: An unconventional concept to valuable products

Compatibilization of polyolefin blends through acid–base interactions

Hybrid Chemomechanical Plastics Recycling: Solvent-free, High-Speed Reactive Extrusion of Low-Density Polyethylene

Rheological Insights into the Degradation Behavior of PP/HDPE Blends

A Promising Recycling Strategy via Processing Polypropylene/Recycled Poly(ethylene terephthalate): Reactive Extrusion Using Dual Compatibilizers

Upcycling of recycled polyethylene for rotomolding applications via dicumyl peroxide crosslinking

Recycled polyethylene/polyethylene‐ethylene‐1‐octene‐maleic anhydride composite with improved mechanical properties

A facile methodology for side- and up- cycling of HDPE waste via partial creation of unsaturated double bonds

The Effect of Using the Two-Step Extrusion Method on the Oxidation Induction Time Value of Recycled High Density Polyethylene

High-Value Recycling of Isotactic Polypropylene-Based Plastic Waste as a Crystallization Promoter for High-Performance Polypropylene Random Copolymers

Sustainable high-density polyethylene via chemical recycling: From modification to polymerization methods

A simple, efficient and selective catalyst for closed-loop recycling of PEF in situ towards a circular material economy approach

Catalytic conversion of mixed polyolefins under mild atmospheric pressure