Abstract:Waste polyethylene is blended and pulverized before adding a crosslinking agent via dry‐blending to produce parts via rotational molding. Polyethylene (PE), including high‐density polyethylene (HDPE) and low‐density polyethylene (LDPE), makes up a significant part of post‐consumer plastics in municipal solid waste, presenting challenges for traditional recycling methods due to a wide range of melt flow properties and poor interfacial adhesion between the different resin, which often leads to low quality products (downcycling). In this study, a method is proposed to modify the molecular structure of post‐consumer PE (rHDPE and rLDPE) and their blends by using a straightforward organic peroxide crosslinking technique with 1 phr of dicumyl peroxide (DCP). Different rHDPE/rLDPE blend weight ratios (0/100, 20/80, 40/60, 50/50, 60/40, 80/20, and 100/0) were prepared using a combination of co‐rotating twin‐screw extrusion and pulverization. The final parts were produced via rotomolding where both the forming and crosslinking processes occurred concurrently. Subsequently, the materials were characterized in terms of chemical, thermal, and mechanical properties. It was found that the tensile strength (228%), tensile modulus (345%), flexural strength (145%), and flexural modulus (251%) increased by crosslinking the 80% wt. rHDPE (x‐rHDPE). Conversely, the gel content increased by 17%, thermal resistance by 37.2%, and the impact strength by 93% with 80% wt. rLDPE (x‐rLDPE). It can be concluded that a balance between the properties occurs as the addition of DCP improved both the interfacial adhesion and melt properties of rHDPE/rLDPE blends. This innovative approach represents a simple and straightforward method to upcycle mixed plastics (PE) streams, especially for rotomolding applications. It also offers promising avenues for sustainable waste management and material reuse.

A facile methodology for side- and up- cycling of HDPE waste via partial creation of unsaturated double bonds

Oxidative Upcycling of Polyolefin Wastes into the Dynamically Cross-Linked Elastomer

Chemical upcycling of high-density polyethylene into upcycled waxes as rheology modifiers and paper coating materials

Sustainable high-density polyethylene via chemical recycling: From modification to polymerization methods

Oxidative Upcycling of Polyethylene to Long Chain Diacid over Co‐MCM‐41 Catalyst

Catalyst‐ and Solvent‐Free Upcycling of Poly(Ethylene Terephthalate) Waste to Biodegradable Plastics (Adv. Mater. 46/2024)

Upcycling of recycled polyethylene for rotomolding applications via dicumyl peroxide crosslinking

Catalytic Upcycling of Polyolefins

Hydrogen-free Upcycling of Polyethylene Waste to Methylated Aromatics over Ni/ZSM-5 under Mild Conditions.

Rapid Chemical Recycling of Waste Polyester Plastics Catalyzed by Recyclable Catalyst

Sustainable chemical upcycling of waste polyolefins by heterogeneous catalysis

Chemical upcycling of polyethylene, polypropylene, and mixtures to high-value surfactants

Upgrading Waste Polylactide via Catalyst‐Controlled Tandem Hydrolysis‐Oxidation

Catalytic conversion of mixed polyolefins under mild atmospheric pressure

Cascade degradation and upcycling of polystyrene waste to high-value chemicals

Catalyst- and Solvent-Free Upcycling of Poly(Ethylene Terephthalate) Waste to Biodegradable Plastics

Bio-upcycling of even and uneven medium-chain-length diols and dicarboxylates to polyhydroxyalkanoates using engineered Pseudomonas putida

Recent Progress in Upcycling of Plastic Wastes into Value-Added Chemicals Via Photo-, Electro- and Photoelectro-Catalytic Strategies

Value‐added Upcycling of PET to 1,4‐Cyclohexanedimethanol by a Hydrogenation/Hydrogenolysis Relay Catalysis

Driving selective upcycling of mixed polyethylene waste with table salt

From Polyester Plastics to Diverse Monomers via Low-Energy Upcycling