Abstract:A magnetized inductively coupled plasma ion beam etcher (MICP-IBE) was designed by employing electromagnets around the etcher (IBE). A magnetic field can be set up such that the magnitude of the magnetic flux density on the screen grid increases or decreases with the radial distance from the screen grid center. Four different types of magnetic field conditions were considered. The plasma densities and electron temperatures were measured as functions of radial distance from the screen grid center under each condition. In addition, ion flux was measured with respect to radial distance from the substrate center using ion energy analyzer (IEA), after which the uniformity characteristics of the ion flux in the substrate were investigated. The dry etching characteristics of CoFeB, a typical alloy being used in the magnetic memory device, were investigated. The uniformity characteristics of the ion flux and the etch rate can be improved with the proper design of magnetic field conditions; however, the improvement was confirmed to be limited. In this respect, a new screen and acceleration grid were designed that have different grid hole densities with radial distance from the grid center (hereafter referred to as the proposed grid). Using the proposed grid, the ion flux and etch rate of CoFeB were measured with respect to radial distance from the substrate center, to see if the radial etch rate uniformity can be improved further. The CoFeB etch rate non-uniformity in the proposed grid (11.65%) was lower than that for the conventional grid (17.5%).

Positive control of uniformity in ribbon beams for implantation of flat-panel displays

Uniform irradiation of adjustable target spots in high-power laser driver.

Uniformity Enhancement of Incident Dose on Concave Surface in Plasma Immersion Ion Implantation Assisted by Beam-Line Ion Source

Broad beam ion implantation machine uniformity regulating device

Realization of High Irradiation Uniformity for Direct Drive ICF at the SG-III Prototype Laser Facility

Treatment Homogeneity and Conformal Analysis of Plasma Based Ion Implanted 3d Target

Figuring Method of High Convergence Ratio for Pulsed Ion Beams Based on Frequency-Domain Parameter Control

Design of a Beam Line for Simultaneous Dual-Beam Ion Implantation

Development of a 50 kV hydrogen–helium mixed ion beam implanter

Calibration of Etching Uniformity for Large Aperture Multilevel Diffractive Optical Element by Ion Beam Etching

New formation technology for a plasma display panel barrier-rib structure using a precise metal mold fabricated by the UV-LIGA process

A Study on the Improvement of Etch Uniformity in an Ion Beam Etcher with a Magnetized Inductively Coupled Plasma Source

Ion beam measurement systems and methods for ion implant dose and uniformity control

Improved Planar Radio Frequency Inductively Coupled Plasma Configuration in Plasma Immersion Ion Implantation

Development of a laser-focused ion beam combination machine

Particle-in-cell Numerical Simulation of Non-Uniform Plasma Immersion Ion Implantation

Polyatomic ions from a high current ion implanter driven by a liquid metal ion source

Large-Area and High-Precision Milling of Focused Ion Beam Based on the Integration of Nanoscale Machine Vision and Compensation Control

Method and apparatus for improved uniformity control with dynamic beam shaping

Optical Sensitivity Non-Uniformity Analysis and Optimization of A Tilt Optical Readout Focal Plane Array

A One-Dimensional Ion Beam Figuring System for X-Ray Mirror Fabrication.