Abstract:As we know, 3DPC is printed layer by layer compared with mold-casting conventional concrete. Pore structure and layer-to-layer interface are two main aspects of the internal structure for 3DPC, which decide 3DPC's mechanical performance. The layer-to-layer interface caused by printing is specific to 3DPC. The emphasis of this study lies in the layer-to-layer interfaces of 3DPC. The first aim of this study is to quantify the characteristics of the layer-to-layer interface and therefore characterize different aspects of the interfaces. The second aim of this study is to explore how the internal structure of printed concrete influences the mechanical performance of 3DPC. This research set out to design a series of experimental comparisons between 3DPC and casted concrete with the same compositions. Mechanical tests, i.e., compressive stress, ultrasonic Pulse Velocity test, flexural tension, and tension splitting, as well as the Ultrasonic Pulse Velocity test, were performed to check the mechanical performance of 3DPC. Contrary to what has often been expected, the mechanical test results showed the printed concrete has a quality not worse than casted concrete with the same recipe. Meanwhile, the X-ray computed tomography (X-CT) is used to characterize the internal structure, pore shapes, and interfaces of 3DPC. First, the investigation revealed that the lower total porosity and fewer big voids could be the fundamental causes meaning 3DPC has a better mechanical performance than casted concrete. Second, the statistics based on aspect ratio show that the distribution curves follow similar trends, regardless of the printed or casted concrete. Third, this study quantified the depth of the different interfaces for 3DPC. The results suggest that the porosity in an interface varies in a range. The author's pioneer work has contributed to our present understanding of the interfaces of 3DPC.

Trans-layer and inter-layer fracture behavior of extrusion-based 3D printed concrete under three-point bending

Investigation of the Internal Structure of Hardened 3D-Printed Concrete by X-CT Scanning and Its Influence on the Mechanical Performance.

Bond shear performances and constitutive model of interfaces between vertical and horizontal filaments of 3D printed concrete

Triaxial compressive behavior of 3D printed PE fiber-reinforced ultra-high performance concrete

Crack propagation and failure mechanism of 3D printing engineered cementitious composites (3DP-ECC) under bending loads

Behavior of 3D-printed HPC plates with FRP grid reinforcement under bending

Anisotropic mechanical properties of extrusion-based 3D printed layered concrete

Extended finite element multiscale modelling for crack propagation in 3d-printed fibre-reinforced concrete

Interfacial constitutive model of 3D printed fiber reinforced concrete composites and its experimental validation

3D-printing ultra-high performance fiber-reinforced concrete under triaxial confining loads

Bonding performance of 3D printing concrete with self-locking interfaces exposed to compression–shear and compression–splitting stresses

Fracturing behaviors of FRP-strengthened concrete structures

Hardened properties of 3D printed concrete: The influence of process parameters on interlayer adhesion

Mechanical and macrostructural properties of 3D printed concrete dosed with steel fibers under different loading direction

Mechanical behavior of FRP sheets reinforced 3D elements printed with cementitious materials

Flexural performance of 3D-printed composite beams with ECC and recycled fine aggregate concrete: Experimental and numerical analysis

The relationship between the rheological behavior and interlayer bonding properties of 3D printing cementitious materials with the addition of attapulgite

Bond Performance Between BFRP Bars and 3D Printed Concrete

Mechanical behaviors of 3D printed lightweight concrete structure with hollow section

Peridynamic buildability analysis of 3D-printed concrete including damage, plastic flow and collapse

Interfacial Properties of Three-Dimensional-Printed Permanent Formwork with Cast-in-Place Concrete