Abstract:The segregation of alien solute atoms at grain boundaries (GBs) in nanocrystalline materials can dramatically affect their macroscopic properties. As important solutes in Al alloys, Mg and Cu atoms have been experimentally observed to segregate at GBs, which would render a significant impact on the material. In this work, first-principles calculations were used to conduct a systematic and comprehensive investigation to reveal the segregation behavior of Mg and Cu atoms at Al Σ5 (310) and Σ9 (221) GBs and its effect on GB properties. The negative segregation energy demonstrates that both Mg and Cu have a strong tendency to segregate to the Al GBs. Moreover, the segregation of Mg and Cu atoms can reduce the GB energy, indicating an increased thermodynamic stability of the GBs. Mechanical properties are explored by a combination of canonical Griffith fracture model with ab-initio tensile test method. Results reveal that the doped Mg will embrittle both GBs due to the elongation of interatomic bonds and depletion of charge density across the GBs. Contrarily, the segregated Cu contributes greatly to enhancing the GB strength by creating strong Cu-Al bonds with surrounding Al at GBs. Besides, the increased tensile separation displacement of GBs with Cu segregation also suggests an improved resistance to fracture, especially the Σ9 (221) GB. This work provides a theoretical understanding for the changes in microscopic properties of Al GBs caused by Mg and Cu segregation from an atomic and electronic level.

Co-segregation of Mg and Zn atoms at the planar η1-precipitate/Al matrix interface in an aged Al–Zn–Mg alloy

Evolution of Precipitate and Precipitate/matrix Interface in Al-Zn-Mg-Cu(-Ag)alloys

Experimental Characterization and First-Principles Calculations of Zn Segregation at the Β″-Mg5al2si4/al Interfaces in Al-Mg-Si Alloys

Atomic-scale study on the precipitation behavior of an Al-Zn-Mg-Cu alloy during isochronal aging

Segregation of the Major Alloying Elements to Al3(Sc,Zr) Precipitates in an Al–Zn–Mg–Cu–Sc–Zr Alloy

First-principles study on the interfacial bonding strength and segregation at Mg/MgZn2 matrix interface

Precipitation and crystallographic relationships of nanosized η/η’ precipitates at S-Al interface in Al-Zn-Mg-Cu alloy

Atom Probe Tomographic Study of Elemental Segregation at Grain Boundaries for a Peak-Aged Al–Zn–Mg Alloy

Precipitation in an Al-Zn-Mg-Cu alloy during isothermal aging: Atomic-scale HAADF-STEM investigation

Transmission Electron Microscopy Investigation and Interpretation of the Morphology and Interfacial Structure of the ∊′-Mg54ag17precipitates in an Mg–Sn–Mn–Ag–Zn Alloy

Nucleation and evolution mechanism of precipitates during the initial aging stage in Al-Zn-Mg-Cu alloy

Heterogeneous nucleation of β-type precipitates on nanoscale Zr-rich particles in a Mg-6Zn-0.5Cu-0.6Zr alloy

Influence of Zr addition on the morphology of primary MgZn 2 in the solidification microstructure of Zn-6Al-3Mg alloy

Periodic linear complexions: Co-segregation of solutes at a low-angle grain boundary in a magnesium alloy

Segregation of S precipitates at T/Al interfaces and relevant effects on localized corrosion mechanisms in Al-Cu-Mg alloy

Co-precipitation of T′ and η′ phase in Al-Zn-Mg-Cu alloys

First-principles investigation of the Mg, Cu segregation at Al Σ5 (310) and Σ9 (221) symmetrical tilt grain boundaries

Revisiting the precipitation mechanisms of Guinier-Preston zones, η′, and η precipitates in Al-Zn-Mg alloys

Effect of dislocation configuration on Ag segregation in subgrain boundary of a Mg-Ag alloy

Characterization of precipitates in aged Mg-4 wt%Zn alloy

Unraveling the Enhanced Stability and Strength of Al Σ9 (221)[$$ 1\bar{1}0 $$] Symmetric Tilt Grain Boundary with Mg Segregation