Abstract:Abstract Microfluidics has enabled low volume biochemistry reactions to be carried out at the point-of-care. A key component in microfluidics is the microfluidic valve. Microfluidic valves are not only useful for directing flow at intersections but also allow mixtures/dilutions to be tuned real-time and even provide peristaltic pumping capabilities. In the transition from chip-in-a-lab to lab-on-a-chip, it is essential to ensure that microfluidic valves are designed to require less peripheral equipment and that they are transportable. In this paper, a thermally-actuated microfluidic valve is presented. The valve itself is fabricated with off-the-shelf components without the need for sophisticated cleanroom techniques. It is shown that multiple valves can be controlled and operated via a power supply and an Arduino microcontroller; an important step towards transportable microfluidic devices capable of carrying out analytical assays at the point-of-care. It is been calculated that a single actuator costs less than $1, this highlights the potential of the presented valve for scaling out. The valve operation is demonstrated by adjusting the ratio of a water/dye mixture in a continuous flow microfluidic chip with Y-junction channel geometry. The power required to operate one microfluidic valve has been characterised both theoretically and experimentally. Cyclical operation of the valve has been demonstrated for 65 h with 585 actuations. The presented valve is capable of actuating rectangular microfluidic channels of 500 μm × 50 μm with an expected temperature increase of up to 5 °C. The fastest actuation times achieved were 2 s for valve closing (heating) and 9 s for valve opening (cooling).

Electrothermally modulated stop-go microvalves for capillary transport systems

Microvalve-Based Tunability of Electrically Driven Ion Transport Through a Microfluidic System with Ion-Exchange Membrane

Electrokinetics In Micro-Channeled Cantilevers: Extending The Toolbox For Reversible Colloidal Probes And Afm-Based Nanofluidics

Alternating current driven interfacial dynamics of a binary fluid in a patterned fluidic environment modulated by electrothermal effects

Electro-actuated valves and self-vented channels enable programmable flow control and monitoring in capillary-driven microfluidics

Preparation of thermoswitchable micro capillary force valves inside polydimethylsiloxane microfluidic channels

Thermally-actuated microfluidic membrane valve for point-of-care applications

An embedded microfluidic valve for dynamic control of cellular communication

A virtual valve for smooth contamination-free flow switching

Alteration in contact line dynamics through competition between thermocapillary and electrothermal effects

Advanced Capillary Soft Valves for Flow Control in Self-Driven Microfluidics

Design, Fabrication, and Testing of a Novel Thermally Actuated Tesla Valve: A Hybrid Microvalve

Directional free-surface flows on a microfluidic chip with interplay of electrical and thermal fields

Decoupling Variable Capacitance and Diffusive Components of Active Solid-Liquid Interfaces with Flex Points

Electrically switched asymmetric interfaces for liquid manipulation

Electrically Modulated Thin Film Dynamics Controlling Bubble Manipulation in Microfluidic Confinement

Study on Functionality and Surface Modification of a Stair-Step Liquid-Triggered Valve for On-Chip Flow Control

Hydrodynamics of electro-capillarity propelled non-Newtonian droplets through micro-confinements

Tesla valves and capillary structures-activated thermal regulator

Alternating Current Electrothermal Flow for Energy Efficient Thermal Management of Microprocessor Hot Spots

The dynamics of capillary flow in an open-channel system featuring trigger valves