Abstract:By manipulating the geometry and surface chemistry of microfluidic channels, capillary-driven microfluidics can move and stop fluids spontaneously without external instrumentation. Furthermore, complex microfluidic circuits can be preprogrammed by synchronizing the capillary pressures and encoding the surface tensions of microfluidic chips. A key component of these systems is the capillary valve. However, the main concern for these valves is the presence of unwanted diffusion during the valve loading and activation steps that can cause cross-contamination. In this study, we design and validate a novel diffusion-free capillary valve: the π-valve. This valve consists of a 3D structure and a void area. The void acts as a spacer between two fluids to avoid direct contact. When the valve is triggered, the air trapped within the void is displaced by pneumatic suction induced from the capillary flow downstream without introducing a gas bubble into the circuit. The proposed design eliminates diffusive mixing before valve activation. Numerical simulation is used to study the function and optimize the dimensions of the π-valve, and 3D printing is used to fabricate either the mould or the microfluidic chip. A comparison with a conventional valve (based on a constriction-expansion valve) demonstrates that the π-valve eliminates possible backflow into the valve and reduces the mixing and diffusion during the loading and trigger steps. As a proof-of-concept, this valve is successfully implemented in a capillary-driven circuit for the determination of benzodiazepine, achieving the successive release of 3 solutions in a 3D-printed microfluidic chip without external instrumentation. The results show a 40% increase in the fluorescence intensity using the π-valve relative to the conventional value. Overall, the π-valve prevents cross-contamination, minimizes sample use, and facilitates a sophisticated preprogrammed release of fluids, offering a promising tool for conducting automated immunoassays applicable at point-of-care testing.

Advanced Capillary Soft Valves for Flow Control in Self-Driven Microfluidics

Electro-actuated valves and self-vented channels enable programmable flow control and monitoring in capillary-driven microfluidics

Flow Regulation Performance Analysis of Microfluidic Passive Valve for High Throughput Liquid Delivery

Study on Functionality and Surface Modification of a Stair-Step Liquid-Triggered Valve for On-Chip Flow Control

A virtual valve for smooth contamination-free flow switching

Microfluidic programmable strategies for channels and flow

Electrothermally modulated stop-go microvalves for capillary transport systems

An embedded microfluidic valve for dynamic control of cellular communication

Preparation of thermoswitchable micro capillary force valves inside polydimethylsiloxane microfluidic channels

An Addressable Electrowetting Valve for Centrifugal Microfluidics

The dynamics of capillary flow in an open-channel system featuring trigger valves

Research on an Off-Chip Microvalve for Pneumatic Control in Microfluidic Chips

Thermally-actuated microfluidic membrane valve for point-of-care applications

Closable Valves and Channels for Polymeric Microfluidic Devices

Self-Actuated, Thermo-Responsive Hydrogel Valves for Lab on a Chip

Controlling flow in microfluidic channels with a manually actuated pin valve

Programmable capillary action controls fluid flows

Diffusion-free valve for preprogrammed immunoassay with capillary microfluidics

Microvalve-based devices for flow-free gradient generators

Tesla Valve-Based Flexible Microhybrid Chip with Unidirectional Flow Properties

Configurable 3D Printed Microfluidic Multiport Valves with Axial Compression