Abstract:By manipulating the geometry and surface chemistry of microfluidic channels, capillary-driven microfluidics can move and stop fluids spontaneously without external instrumentation. Furthermore, complex microfluidic circuits can be preprogrammed by synchronizing the capillary pressures and encoding the surface tensions of microfluidic chips. A key component of these systems is the capillary valve. However, the main concern for these valves is the presence of unwanted diffusion during the valve loading and activation steps that can cause cross-contamination. In this study, we design and validate a novel diffusion-free capillary valve: the π-valve. This valve consists of a 3D structure and a void area. The void acts as a spacer between two fluids to avoid direct contact. When the valve is triggered, the air trapped within the void is displaced by pneumatic suction induced from the capillary flow downstream without introducing a gas bubble into the circuit. The proposed design eliminates diffusive mixing before valve activation. Numerical simulation is used to study the function and optimize the dimensions of the π-valve, and 3D printing is used to fabricate either the mould or the microfluidic chip. A comparison with a conventional valve (based on a constriction-expansion valve) demonstrates that the π-valve eliminates possible backflow into the valve and reduces the mixing and diffusion during the loading and trigger steps. As a proof-of-concept, this valve is successfully implemented in a capillary-driven circuit for the determination of benzodiazepine, achieving the successive release of 3 solutions in a 3D-printed microfluidic chip without external instrumentation. The results show a 40% increase in the fluorescence intensity using the π-valve relative to the conventional value. Overall, the π-valve prevents cross-contamination, minimizes sample use, and facilitates a sophisticated preprogrammed release of fluids, offering a promising tool for conducting automated immunoassays applicable at point-of-care testing.

A virtual valve for smooth contamination-free flow switching

Preparation of thermoswitchable micro capillary force valves inside polydimethylsiloxane microfluidic channels

Microfluidic switch based on combined effect of hydrodynamics and electroosmosis

Sample Flow Switching Technique Based on Combined Effect of Hydrodynamic and Electroosmosis

Self-Actuated, Thermo-Responsive Hydrogel Valves for Lab on a Chip

Thermally-actuated microfluidic membrane valve for point-of-care applications

An embedded microfluidic valve for dynamic control of cellular communication

Diffusion-free valve for preprogrammed immunoassay with capillary microfluidics

A Novel Microfluidic Valve Controlledby Induced Charge Electro-Osmotic Flow

Electrothermally modulated stop-go microvalves for capillary transport systems

Non-Invasive Manipulation of Two-Phase Liquid-Liquid Slug Flow Parameters Using Magnetofluidics

Autonomous Capillary Microfluidic Devices with Constant Flow Rate and Temperature-Controlled Valving

Advanced Capillary Soft Valves for Flow Control in Self-Driven Microfluidics

Microvalve-based devices for flow-free gradient generators

Acoustic Valve for Droplet Microfluidics

Integrated Obstacle Microstructures for Gas-Liquid Separation and Flow Switching in Microfluidic Networks

An Addressable Electrowetting Valve for Centrifugal Microfluidics

A Novel Flow Control Valve for POCT Chip Based on Micro Rectangular Groove Array

A Simple And Reliable Configuration With Needle Valve For Manipulating Flow In Microfluidic Chip

Optically-controlled closable microvalves for polymeric centrifugal microfluidic devices

Research on an Off-Chip Microvalve for Pneumatic Control in Microfluidic Chips