Abstract:This paper investigates the possibilities of limiting emergency short current pulses by using materials with a positive temperature coefficient. A computational model and method for simulating this process were proposed. Barium titanate was considered a promising material for current-limiting devices due to its low cost, ease of manufacturing and autonomy. The current-limiting properties of a PTC thermistor device were estimated in relation to a significant pulse current overload (10 ms). The value of taking into account the varistor effect when modeling energy dissipation by a PTC thermistor is experimentally demonstrated. The results of the experiment were used in the development of computer models of the current-limiting properties of PTC thermistors. A method for taking into account the varistor effect in the developed models is proposed. It is noted that in order to increase the accuracy of the calculation, it is important to take into account the heat transfer between the PTC thermistor and its contact system. It is also shown that this heat transfer is capable of creating a significant longitudinal temperature gradient inside the PTC thermistor, which creates a high level of thermal stress and leads to mechanical failure. Destruction of this type has been observed during experiments. This research was carried out within the state assignment FSEG-2023-0012.

What problem does this paper attempt to address?

The problem this paper attempts to address is: how to use thermistor materials with Positive Temperature Coefficient (PTC) to limit short-circuit current pulses. Specifically, the paper explores the potential of using these materials to limit short-circuit currents in power systems and proposes a computational model and method to simulate this process. ### Main Research Content: 1. **Background and Problem**: - The issue of short-circuit current limitation is a common problem in power systems, especially in large cities, mining complexes, oil well platforms, large ships, etc. - Traditional mechanical circuit breakers have issues with insufficient switching capacity and long disconnection times during accidents. - The paper explores various existing current limiting technologies, such as current limiting reactors, fuses, and semiconductor-based solutions, but these methods all have their limitations. 2. **Advantages of PTC Thermistors**: - PTC thermistors significantly increase resistance when heated by current, effectively limiting the current. - Compared to Superconducting Fault Current Limiters (SFCL), PTC thermistors have lower manufacturing costs and simpler processes. - Barium titanate (BaTiO₃) was chosen for the study due to its low manufacturing cost, ease of production, and autonomy advantages. 3. **Experiments and Simulations**: - The paper proposes a computational model and method to simulate the behavior of PTC thermistors in limiting short-circuit current pulses. - The B59810-C120-A70 type PTC thermistor was used in the experiments, conducting current pulse overload tests. - Simulation and experimental results indicate that considering the varistor effect is crucial for improving the model's accuracy. 4. **Research Methods**: - A test platform was designed to evaluate the current limiting capability of PTC thermistors under short-circuit current pulses. - The test platform includes a capacitor bank, inductor, and resistor, with the capacitor discharge triggered by a thyristor to generate current pulses. - A Hall sensor was used to measure the current, while the voltage across the PTC thermistor was recorded. 5. **Conclusion**: - Experimental results validated the effectiveness of PTC thermistors in limiting short-circuit current pulses. - Considering the varistor effect and heat transfer is crucial for improving model accuracy. - The study also found that heat transfer causes significant longitudinal temperature gradients within the PTC thermistor, leading to mechanical failure. ### Keywords: - PTC thermistor - Current limitation - Barium titanate - Failure mechanism Through these studies, the paper provides a theoretical and experimental foundation for developing PTC thermistor current limiting devices for higher voltages and larger currents.

The Specifics of PTC Thermistor Applications for Limiting Surge Currents

Experimental Study on Transient Cooling Characteristics of a Realistic Thermoelectric Module under a Current Pulse Operation

Theoretical and Experimental Studies on Thermal Control by Using a Novel PTC Material with Room Temperature Curie Point

Research and Application of Polymer-Based PTC Composites

Study on Dynamic Thermal Control Performance of Positive Temperature Coefficient (PTC) Material Based on a Novel Heat Transfer Model Considering Internal Heat Transfer

Experiment Investigation of A Two-Stage Thermoelectric Cooler under Current Pulse Operation

Experimental Study of Accurate Temperature Control Using PTC Resistance

High-precision Adaptive Temperature Control Performance of Thin Positive Temperature Coefficient Materials with Ultra-High Resistance-Temperature Coefficient

A Numerical Study on the Temperature Overshoot Characteristic of A Realistic Thermoelectric Module under A Current Pulse Operation

SPICE Model of Polyswitch Device

Study on the low Curie point positive temperature coefficient (PTC) material based on the conductive model

Fabrication and performance evaluation of the flexible positive temperature coefficient material for self‐regulating thermal control

Study on PID Temperature Control Performance of a Novel PTC Material with Room Temperature Curie Point

Studies on preparation and adaptive thermal control performance of novel PTC (positive temperature coefficient) materials with controllable Curie temperatures

A Dimensionless Study on Thermal Control of Positive Temperature Coefficient (PTC) Materials

Strontium-Lead Titanate Based Composite Thermistor Materials

Experimental Research of 300 Hz Pulse Tube

Study On Thermal Control Behavior By Using Batio3-Based Ptc Materials With Room Temperature Curie Point

Research progress on conduction mechanism and factors influencing the performance of polymeric PTC composites

Thermally Coupled NTC Chip Thermistors: Their Properties and Applications

Investigation of the Positive Temperature Coefficient Resistivity of Nb-Doped Ba0.55Sr0.45TiO3 Ceramics