In-nozzle flow of superheated liquid release and the influence on the external flashing jet using transparent nozzles
Xuhai Pan,Wei Zhu,Hao Tang,Xueliang Zhu,Xilin Wang,Yu Mei,Min Hua,Juncheng Jiang
DOI: https://doi.org/10.1016/j.ijmultiphaseflow.2024.104799
IF: 4.044
2024-03-18
International Journal of Multiphase Flow
Abstract:Accident release of superheated liquid could produce a violent phase change and trigger a highly destructive flashing jet. In this work, release experiments are performed using a 20 L tank and transparent nozzles, with water as the fluid throughout. The experimental conditions included storage temperature ( T st = 100-160 °C), storage pressure ( P st = 6-16 bar), and nozzle sizes ( D = 1-6 mm). High-speed image processing and capacitive void fraction sensor are used to quantify the two-phase flow of superheated liquid inside the nozzle and the downstream jet break-up regimes. The experimental results show that void fraction ( α ) goes through three phases during the release process: growth, stabilization and decay. It is also demonstrated that bubble nucleation, growth and burst determine the breakup of the downstream jet. The T st and D are the main factors affecting the α , while the P st only change the release rate. Moreover, it is verified that none of the existing flashing criteria ( Ja-We, χ* ) can accurately determine the boundary conditions of the flashing regimes. Instead, the parameters characterizing bubbles nucleation and growth, α, can unify the effects of ( T st , P st , and D ) to determine the physical mechanism of the flashing process. In this work, a novel method to distinguish between external flashing ( α = 0), internal flashing (0 < α ≤ 25) and full flashing ( α > 25), and a steady-state model k = f ( Ja, We, α ) is developed for the flashing jet.
mechanics