Abstract:Through recent numerical studies, the shock-to-shock interactions between flash-boiling jets are believed to be the reason for multi-jet spray collapse in gasoline direct injection (GDI) engines. But this sort of interaction was not well understood through the experimental investigation. In the present study, a two-hole GDI injector was used to examine this process via optical diagnostics and CFD simulations. With the increase in superheat level (Rp), the shock waves (primary cells) in individual jets became observable. Further increase in Rp could cause shock-to-shock interactions, and a secondary cell could be formulated between two primary cells. The different intensity of shock-to-shock interactions would result in different jet-to-jet interaction behaviors. In the moderate interaction region, the secondary jet appeared inside and downstream of the secondary cell, but the sprays did not collapse. In the highly interaction region, both the secondary jet and spray collapse could be observed, where the secondary jet would laterally develop perpendicular with the plane of the two jets. The detailed numerical results showed that the secondary cell was small in the moderate interaction region, but became much larger in the highly interaction region. The occurrence of secondary cell directed the fuel from primary cells into the secondary cell, contributing to the generation of secondary jet. After flowing out of the secondary cell, the incipient secondary jet could subsequently entrain the nearby low-velocity fuel. Further, the strong shock-to shock interactions would alter the shape of primary cells, reducing the transverse velocity component of jets and promoting collapse. Based on the experimental and numerical results, the existence of shock-to-shock interactions and its important role in jet-to-jet interactions and spray collapse were fully illustrated, and this understanding would be of help in nozzle optimization.

INSIGHT INTO JET-TO-JET INTERACTIONS UNDER FLASH-BOILING CONDITIONS USING A MULTI-HOLE INJECTOR WITH WIDE ENVELOP SPRAY ANGLE

Investigation into Shock-to-shock Interactions Induced by Flash Boiling and the Impact on Spray Behaviors

General Understanding on Spray Collapse Process of an Asymmetrical Multi-Hole Direct Injection Gasoline Injector under Wide Flash-Boiling Conditions

Radial Expansion of Flash Boiling Jet and Its Relationship with Spray Collapse in Gasoline Direct Injection Engine

COMPARATIVE STUDY ON THE COLLAPSE MODES UNDER FLASH-BOILING AND NON-FLASH-BOILING CONDITIONS USING A TWO-HOLE GDI INJECTOR

Numerical Investigation on Flash Boiling GDI Spray Collapse Process Using HRM Model

Comparison of Spray Collapses at Elevated Ambient Pressure and Flash Boiling Conditions Using Multi-Hole Gasoline Direct Injector

Interaction Between Under-Expanded Flashing Jets: A Numerical Study

Spray Morphology Transformation of Propane, N-Hexane and Iso-Octane under Flash-Boiling Conditions

Numerical study on spray collapse process of ECN spray G injector under flash boiling conditions

Numerical Investigation on Flashing Jet Behaviors of Single-Hole GDI Injector

Experimental Analysis in Dynamics Characteristics of Impinging Spray by a PFI Injector : from Spray Atomization to Fuel Adhesion Formation

The Influence of Flash Boiling Conditions on Spray Characteristics with Closely Coupled Split Injection Strategy

Characterizing Under-Expansion Behaviors Induced by Rapid Phase Change of Flash-Boiling Jets

Characterizing External Flashing Jet from Single-Hole GDI Injector

An exploration on collapse mechanism of multi-jet flash-boiling sprays

Influence of plume arrangement on spray collapsing process in lateral-cylinder-mounted gasoline injectors

Nozzle Tip Wetting in GDI Injector at Flash-boiling Conditions

Experimental Characterization of Closely Coupled Split Isooctane Sprays under Flash Boiling Conditions

Microscopic Characterization of Isooctane Spray in the Near Field under Flash Boiling Condition

Microscopic and Macroscopic Characterization of Spray Impingement under Flash Boiling Conditions with the Application of Split Injection Strategy