Abstract:Ferritic hot rolling of low carbon steel is now widely adopted by steelmakers for reducing energy costs and increasing the yield. These ferritic hot-rolled coils carry forward different grain morphology and texture which result in variation in properties after cold rolling and annealing compared to austenitic hot-rolled coils. These ferritic hot-rolled coils require different annealing treatments based on the hot rolling temperature for better results. In the present work, a Nb–Ti stabilized interstitial free (IF) grade steel was hot rolled at two different temperatures in the ferritic regime in an industrial hot strip mill and was subsequently cold rolled. These cold-rolled sheets were subjected to different continuous annealing cycles with soaking temperatures varying from 740 to 820 °C on a thermo-mechanical simulator for optimization of temperatures and study its effect on microstructure and properties. These coils were compared with simulated conventional austenitic hot-rolled coils. Ferritic rolled coils show better elongation and a higher percentage of equiaxed grains indicating better formability. The optimum continuous annealing temperature was found to be a function of hot rolling temperature in the ferritic regime. Elongation and grain size increased with an increase in temperature in all the samples, but the ferritic rolled coils show faster change due to higher stored energy. Comparison of elongation and microstructure indicates that temperatures above 780 °C should be sufficient for achieving complete recrystallization in ferritic rolled samples, compared to 810 °C required in the conventional austenitic rolled sheets which is an industrial advantage. Based on simulation studies, full-scale plant continuous annealing was carried out under the optimized temperature conditions where microstructure and properties matched closely with the simulation results and electron backscatter diffraction (EBSD) analysis confirmed improved texture.

Investigation on Recrystallization Behavior of Cold‐Rolled Silicon Steel in Continuous Heating with Three‐Point Bending Testing

Effects of Continuous Rolling and Reversible Rolling on 2.4% Si Non-Oriented Silicon Steel

Effect of recrystallization annealing temperature on microstructure, texture and magnetic properties of non-oriented silicon steel produced by strip casting

Roles of Silicon Content and Normalization Temperature on Cold Workability and Recrystallization of High-Grade Non-Oriented Silicon Steel

Tracing the recrystallization of warm temper-rolled Fe–6.5 wt% Si non-oriented electrical steel using a quasi in situ EBSD technique

Numerical simulation on recrystallization behavior and microstructure evolution during hot continuous rolling process of 38CrMoAl steel rod

Effect of heating rate of final annealing stage on secondary recrystallization in grain-oriented silicon steel

Microstructure and Hardness Evolution During Isothermal Process at 700 °C for Fe–24Mn–0.7Si–1.0Al TWIP Steel

Recrystallisation kinetics and yield-strength adjustment after annealing of cold-rolled microalloyed steel

Influence Mechanisms of Cold Rolling Reduction Rate on Microstructure, Texture and Magnetic Properties of Non-Oriented Silicon Steel

Role of Annealing Time in Thin-Gauge Non-oriented Silicon Steels Processed by Strip Casting

Effect of microstructure modification on magnetic and mechanical properties of high-grade non-oriented silicon steel during annealing treatment

Optimization of Annealing Parameters for Ferritic Hot-Rolled IF Grade Steel

The Relationship Between Hot and Cold Rolling Parameters and Secondary Recrystallization Behavior in Silicon Steel Sheets

Effect of Holding Time of Decarbonization Annealing on Recrystallization in Fe-3.2%Si-0.047Nb% Low-Temperature Oriented Silicon Steel

Investigation of the Recovery Process During Continuous Annealing of Cold-Rolled Automotive Steels

On the sluggish recrystallization of a cold-rolled Al–Mn–Fe–Si alloy

Recrystallization of Hot-Rolled 2A14 Alloy during Semisolid Temperature Annealing Process

Effects of High-Temperature Annealing Atmosphere on the Secondary Recrystallization Behavior and Magnetic Properties of Fe-3.2%Si-0.055%Nb Grain-Oriented Silicon Steel

Microstructural evolution and magnetic properties in strip cast non-oriented silicon steel produced by warm rolling

High-resolution simulating of grain substructure in cold rolling and its effects on primary recrystallization in annealing of ferritic stainless steel