Abstract:The expansion induced by sulfate attack on cement-treated aggregates (SACA) is a well-known problem that can be solved. It causes obvious heaves in road bases and railway subgrades. In this paper, the effects of the sodium sulfate content, cement content, degree of compaction, sulfate types, attack types, aluminum ion supply, concentration of curing sulfate solution, and temperature on the expansion behavior induced by SACA were investigated over 60 days in the laboratory. Based on the Sobol sensitivity analysis method, the influence of the sensitivity of each factor on the expansion was quantitatively analyzed, and the dominant factor of expansion was proposed. Results show that sulfate content is the domain factor of expansion that is induced by SACA, and it presents a logarithmic function relationship with strain. The 0.5% sodium sulfate content is the minimum sulfate content which causes the expansion that is induced by SACA. When the sulfate content is less than 1%, the expansion induced by SACA is minor. When the sulfate content is between 1% and 3%, the expansion behavior is expressed in four stages as follows: rapid strain increase, followed by a short stagnation period, then a significant strain increase and, finally, constant strain. When the sulfate content is greater than 5%, there are two stages comprising the expansion behavior as follows: the rapid strain increases and constant strain occurs. Greater sulfate content, greater degree of compaction, and lower temperature have positive effects on the expansion induced by SACA. The cement content does not have a consistent effect on expansion behavior. Compared with a sodium sulfate attack, both the reaction rate and expansion of cement-treated aggregates that are attacked by gypsum are smaller, and the attack period is also longer. When the sulfate content is greater than 1%, the addition of kaolin promotes the progression of the expansion induced by SACA. A small amount of water is sufficient for the demand for the sulfate attack. When the sulfate content is at a certain level, the expansion induced by SACA that is under external attack is much smaller than the expansion that is under internal attack. This study is expected to serve as a reference for future research on the mechanics of SACA, and it attempts to provide theoretical support for amending expansions that are induced by SACA.

Study on the expansion of concrete under attack of sulfate and sulfate–chloride ions

Numerical Investigation on Expansive Volume Strain in Concrete Subjected to Sulfate Attack

An Internal Expansive Stress Model of Concrete under Sulfate Attack

Mechanistic Insights into Two-Stage Expansion of Concrete under External Sulfate Attack

Deformation behaviour of concrete materials under the sulfate attack

Simulations on Expansive Strain of Concrete Caused by Ettringite Growth under Sulfate Attack

A Time-Space Porosity Model Based on the Volume Expansion of Chemical Products of Concrete Under Sulfate Attack

A multi-phase numerical simulation method for the changing process of expansion products on concrete under sulfate attack

A Chemical-Transport-Mechanics Numerical Model for Concrete under Sulfate Attack

A time–space porosity computational model for concrete under sulfate attack

Numerical Simulation of Sulfate Attack in Concrete

Diffusion-reaction Models for Concrete Exposed to Chloride-Sulfate Attack Based on Porosity and Water Saturation

Modeling and simulation of concrete deterioration subjected to external sulfate attack

Theoretical and Experimental Investigation of Loading Effects on Chloride Diffusion in Saturated Concrete

Effect of Sulfate Attack on the Expansion Behavior of Cement-Treated Aggregates

A Review on the Transport-Chemo-Mechanical Behavior in Concrete under External Sulfate Attack

Experimental and Numerical Study of the Effects of Solution Concentration and Temperature on Concrete under External Sulfate Attack

Finite element analysis on the diffusion-reaction-damage behavior in concrete subjected to sodium sulfate attack

Numerical Investigation of External Sulfate Attack and Its Effect on Chloride Binding and Diffusion in Concrete

A Micromechanical-Based Semi-Empirical Model for Predicting the Compressive Strength Degradation of Concrete under External Sulfate Attack