Abstract:Low-cost nitrogen-enriched activated carbons (PNACs) with high microporosity were prepared by a simple one-step activation doping process using KOH as a chemical activator and melamine formaldehyde (MF) as a nitrogen source. These PNACs have shown great potential as effective CO 2 adsorbents. The resulting PNACs were mainly microporous structure, with surface areas ranging from 736 to 2144 m 2 /g and total pore volumes ranging from 0.565 to 1.366 cm 3 /g. The CO 2 adsorption capacities of PNACs were in the range of 2.353 to 6.068 mmol/g and 1.59 to 4.131 mmol/g at 0 °C and 25 °C under 1 bar, respectively. Additionally, the CO 2 /N 2 selectivity of the PNACs ranges from 11.15 to 26.86 at a CO 2 partial pressure of 0.1 bar. The experimental isotherm data were analyzed using various equations and the Toth isotherm equation was found to be the most accurate mathematical model to describe the CO 2 adsorption isotherm of the activated carbon. This result further confirms that PNACs have a non-homogeneous pore structure. Additionally, the CO 2 /N 2 selectivity of the PNACs ranges from 11.15 to 26.86 at a CO 2 partial pressure of 0.1 bar. The exceptional CO 2 adsorption properties can be attributed to the high microporosity and nitrogen content of the PNACs. The relationship between the physicochemical properties and CO 2 adsorption performance of the activated carbon was further investigated by relevance analysis. At 0 °C and 1 bar, it was observed that the pore structure played a predominant role in the CO 2 adsorption process of PNACs. During this condition, PNACs mainly exhibited physical adsorption, which was primarily governed by the microporous filling mechanism. However, at 25 °C and 1 bar, both microporosity and nitrogen content contribute equally to the CO 2 adsorption effect. This observation confirms that the pore structure and nitrogen functional groups work synergistically to influence the CO 2 adsorption performance of PNACs. The adsorption mechanism of PNACs can be described as physical adsorption, driven by the cooperation between nitrogen functional groups and the filling of micropores. This innovative one-step activation doping process successfully converts agricultural and plastic waste into sustainable and high-performance CO 2 adsorbents. It provides new insights for mitigating the greenhouse effect and addressing the issue of plastic pollution.

Nitrogen configuration enriched N-doped activated carbon from spent tea leaves through an ammonia impregnation approach for CO 2 adsorption

Tailoring tea residue-derived nitrogen-doped activated carbon for CO2 adsorption: influence of activation temperature and activating agents

Nitrogen‐doping Activated Biomass Carbon from Tea Seed Shell for CO 2 Capture and Supercapacitor

An Efficient Biochar Adsorbent for CO2 Capture: Combined Experimental and Theoretical Study on the Promotion Mechanism of N-doping

Preparation of Nitrogen-Doped Activated Carbon from Bio-Oil Residue for Efficient CO2 Adsorption

Synthesis of N-doped Hierarchical Porous Carbon with Excellent Toluene Adsorption Properties and Its Activation Mechanism

Modification of activated carbon with nitrogen-based deep eutectic solvents for enhanced CO2 adsorption

Adsorption of low-concentration carbon dioxide on amine-modified carbon nanotubes at ambient temperature

Tailoring Nitrogen‐Doped Activated Carbons: Central Composite Design for Enhanced CO2 Adsorption

Novel nitrogen-enriched activated carbon with tunable microporosity from Agricultural and Plastic Waste for CO 2 adsorption

N-doped porous carbon derived from macadamia nut shell for CO 2 adsorption

Enhanced N-doped Porous Carbon Derived from KOH-Activated Waste Wool: A Promising Material for Selective Adsorption of CO2/CH4 and CH4/N2

Enhancement of CO2 Adsorption on High Surface Area Activated Carbon Modified by N2, H2 and Ammonia

N-doping Porous Carbon with Rich Narrow Micropores for Highly Efficient CO2 Selective Adsorption: Insight from Experimental and Theoretical Study

Exploring the structural characteristics and adsorption capabilities of cost-effective N- doped activated carbon derived from waste biomass for CO2 adsorption

CO2 adsorption on chemically modified activated carbon

In Situ Dry Chemical Synthesis of Nitrogen-Doped Activated Carbon from Bamboo Charcoal for Carbon Dioxide Adsorption

Performance of CO2 Adsorption on Modified Activated Carbons Derived from Okara Powder Waste: Impacts of Ammonia Impregnation

Fabrication of Hierarchical N-doped Carbon Nanotubes for CO2 Adsorption

Highly Efficient CO2 Adsorption by Nitrogen-Doped Porous Carbons Synthesized with Low-Temperature Sodium Amide Activation

The effect of humidity on the enhanced CO2 adsorption of amine-functionalized microporous activated carbon