Abstract:Due to the high modulus, high strength, low density, excellent wear resistance and good neutron absorption, the boron carbide (B4C) particle reinforced aluminum (Al) matrix composites have been widely applied in the aerospace, weaponry, transportation and neutron shielding fields. In response to the increasing requirement of better strength -ductility matching of B4C/Al composites, introducing a nano-scale reinforcement into the B4C/Al composites becomes an attractive research focus. In this work, the SiC nanowires were ball-milled with Al powders, and then the SiC/Al composite powders were mixed with B4C microparticles. Thus, the 15vol. % B4C/SiC/Al composites with different volume fractions of SiC nanowires were fabricated by hot-pressing sintering and hot extrusion. B4C microparticles and SiC nanowires are uniformly dispersed in the B4C/SiC/Al composites, while the introduced SiC nanowires effectively decrease the Al matrix grain sizes. B4C/SiC/Al composites produce the better strength-ductility matching than that of B4C/Al composites, while the 15vol. % B4C/SiC/Al composite with 1vol. % SiC nanowires achieved the best strength-ductility matching. It generates the 281.7 ± 2.7 MPa in yield strength, 351.2 ± 0.1 MPa in ultimate tensile strength and 5.9 ± 0.7% in failure elongation, which are increased by 18.2%, 15.1% and 13.5% compared to the B4C/Al composites. Uniformly dispersed B4C microparticles and SiC nanowires largely block the dislocation motions and improve the dislocation storage capacity, which results in a more significant hetero-deformation induced (HDI) hardening effect in the B4C/SiC/Al composites. Moreover, the B4C/Al interfacial transition regions with the added SiC nanowires becomes stronger, which can enhance the load transfer efficiency of the B4C/Al interfaces as a result of the existing dislocation hardening zones. In conclusion, it is a good strategy to combine the synergistic strengthening effect of micro-scale and nano-scale reinforcements in the metal matrix composites.

Microstructure and mechanical properties of Bp/Al neutron shielding composites

Microstructure and properties of WB/Al nuclear shielding composites prepared by spark plasma sintering

Fabrication and properties of (W+B)/Al hybrid composites for nuclear radiation shielding

Effect of Trace Boron Addition on the Microstructural Evolution and Mechanical Properties in Ti45al8nb2cr-B Alloys

Enhanced thermal shock resistance of BN-based composites sintered by hot-pressing with the introduction of nano oxides

Design and performance of a novel neutron shielding composite materials based on AlSi10Mg porous structure fabricated by laser powder bed fusion

Influence of particulate B4C with high weight fraction on microstructure and mechanical behavior of an Al-based metal matrix composite

Research on Microstructure and Mechanical Properties of B<sub>4</sub>C/Al Composites by Liquid Mental Mixing

Study on a High-Boron-Content Stainless Steel Composite for Nuclear Radiation

High-pressure synthesis of Al<sub>2</sub>O<sub>3</sub>-cBN composites: Effect of thermodynamic condition and cBN volume fraction on their microstructure and properties

The neutron shielding modeling and experimental characteristic in TiB2/Al composites

A novel B 4 C/Al-316 L neutron absorbing clad plate prepared by cold spraying: Microstructure and mechanical properties

Fabrication and characterization of a novel FeCrAl matrix composite containing TiB2 neutron absorbers synthesized in situ

Neutron shielding properties of TPX/B4C composites based on Monte Carlo method

Neutron-Absorption Properties of B/Cu Composites

Upcycling of boron bearing blast furnace slag as highly cost-effective shield for protection of neutron radiation hazard: An innovative way and proposal of shielding mechanism

Aluminum-based tungsten boride composite material and preparation method thereof

Microstructures and mechanical properties of Al nanocomposites hybrid-reinforced with B4C, carbon nanotubes and graphene nanoplatelets

Thermally Stable Microstructures and Mechanical Properties of B4C-Al Composite with In-Situ Formed Mg(Al)B2

Influence of particulate B4C size on microstructural evolution and mechanical behavior in nanostructured Al matrix during heat treatment

Fabrication, microstructure characterization and mechanical properties of B4C microparticles and SiC nanowires hybrid reinforced aluminum matrix composites