Abstract:TiB2 particulate reinforced aluminum matrix composites (TiB2/Al-MMCs) have received extensive attention due to a great potential in a wide variety of applications. Nano-TiB2/Al-MMCs have also received attention from scholars with the development of nanotechnology in recent years. However, obstacles like agglomeration of nanoparticles in the matrix, and the difficulty of preparation of nanoparticulate reinforced metal matrix composites (PRMMNCs) still need to be resolved. This study summarizes the research progress of Al-matrix composites (Al-MMCs) in recent years and exemplifies the common preparation methods. Experiments were designed to study the common problems in the preparation of composite materials. Two experiments were designed and completed in this study. First, TiB2/Al-4.5Cu composites were synthesized through a mixed salt reaction method. The distribution of reinforcing particle in the aluminum matrix was observed. The predictive model of particle behavior in Al-4.5wt. %Cu matrix based on thermodynamic laws was re-examined. The experiment results are inconsistent with the prediction from a classic prediction model. Regardless of the rate of solidification and critical velocity (VC), the most of the particles are rejected by advancing solid-liquid interface. Through review of classic particle pushing theory, this study attempts to derive a new boundary condition used to predict the behavior of reinforcing particles in a metal matrix during solidification based on the diffusion convection equations. Second, nano-TiB2/Al composites with a variety of volume fractions were synthesized by ultrasound assistance in a stirring method. The research has focused on optimization and improvement of preparation methods. High-energy ball milling (HEBM) and high-intensity ultrasound (HIU) were introduced into the fabrication process. Furthermore, a forging post-treatment process is used to process as-cast samples prepared by the experiment, so that the reinforcing particles in the composite material can be redistributed. The experiment results show that HEBM facilitates the mixing of nano-TiB2 particles with salts. HIU helps distribute particles evenly throughout the matrix. The Vickers hardness and tensile strength of the composites were tested. The results indicated that the forging treatment has great influence on the mechanical properties of composite materials.

The neutron shielding modeling and experimental characteristic in TiB2/Al composites

Structural-functional integrated TiB2/Al–Mg-Gd composite with efficient neutron shielding phases and superior mechanical properties

Neutron shielding properties of TPX/B4C composites based on Monte Carlo method

Fabrication of equiaxed ultrafine-grained structures in TiB2/Al-Mg-Gd neutron shielding composites by powder metallurgy routines

Influence of particulate B4C with high weight fraction on microstructure and mechanical behavior of an Al-based metal matrix composite

Microstructure and mechanical properties of Bp/Al neutron shielding composites

Design and performance of a novel neutron shielding composite materials based on AlSi10Mg porous structure fabricated by laser powder bed fusion

The Advancement of Neutron-Shielding Materials for the Transportation and Storage of Spent Nuclear Fuel

Numerical evaluation and experimental verification of mechanical properties and fracture behavior for TiB2/Cu composites prepared by in-situ mixing casting

Fabrication and characterization of a novel FeCrAl matrix composite containing TiB2 neutron absorbers synthesized in situ

Effects of Reinforcement Content and Homogenization Treatment on the Microstructure and Mechanical Properties of in-situ TiB2/2219Al Composites

Microstructure and Mechanical Properties of Aluminum Matrix Composites Reinforced With In-Situ TiB2 Particles

Numerical investigations on the hybrid effect and deformation mechanism of TiB2p and TiBw reinforced Cu composites prepared by in-situ mixing casting

Investigation on the Microstructure and Electrochemical Corrosion Properties of TiB2 reinforced aluminum matrix composites

STUDY ON THE PREPARATION OF NANO-TIB2 REINFORCED AL MATRIX COMPOSITES

Fabrication and properties of (W+B)/Al hybrid composites for nuclear radiation shielding

Numerical modeling and failure evolution of microstructure-based in-situ TiB2 and TiC+TiB2 reinforced Cu matrix composites

The Effect of Micron-Sized TiB2 Particles on the Properties of Al6061 Strengthened with 4% TiB2 Nano-TiB2

Microstructure and properties of WB/Al nuclear shielding composites prepared by spark plasma sintering

Preparation of in situ TiC@TiN core–shell and Ti2N–Al4C3 nanoparticles and their effects on Al–Zn–Mg–Cu alloy

Study on a High-Boron-Content Stainless Steel Composite for Nuclear Radiation