Abstract:Ductile Nb particles have been applied to toughen TiAl-based intermetallic alloys due to the positive effects of the Nb element on their mechanical and processing properties. However, the room-temperature (RT) fracture toughness of powder metallurgical (PM) TiAl–Nb composites needs further improvement to avoid micro-cracks in complex components prepared by PM near-net shape technologies. Herein, a facile heat treatment—annealing in the (α+γ) phase region for a short duration and air-cooling—was applied to strengthen and toughen a PM TiAl–Nb composite. The phase and microstructure evolution of the PM composite during annealing, and their effects on mechanical properties and fracture behaviors, were investigated specifically. It is found that after annealing, the volume fraction of α 2 phase increased markedly, while that of the B2 phase decreased significantly, and the Nb solid solution (Nb ss ) phase almost completely disappeared; the microstructures of the TiAl–Nb composite became significantly finer and more uniform overall, and the microstructure type of the TiAl matrix transformed from near-gamma (NG) to duplex (DP). Both the RT tensile strength and fracture toughness of the TiAl–Nb composite improved markedly after annealing. The strengthening mechanisms for the as-annealed composite were primarily based on the phase and microstructure evolution. The toughening mechanisms for the as-annealed composite included the generation of shear ligaments, delaminations, crack deflection and branching. The improvement in tensile strength and the reduction in work-hardening exponent made the composite tougher through facile annealing. The incorporation of Nb particles and further heat treatment can efficiently facilitate the improvement in fracture toughness of PM TiAl-based alloy.

Structural-functional integrated TiB2/Al–Mg-Gd composite with efficient neutron shielding phases and superior mechanical properties

Fabrication of equiaxed ultrafine-grained structures in TiB2/Al-Mg-Gd neutron shielding composites by powder metallurgy routines

Fabrication of Fully Dense Tial-Based Composite Sheets with A Novel Microlaminated Microstructure

Design and performance of a novel neutron shielding composite materials based on AlSi10Mg porous structure fabricated by laser powder bed fusion

The neutron shielding modeling and experimental characteristic in TiB2/Al composites

Fabrication and characterization of a novel FeCrAl matrix composite containing TiB2 neutron absorbers synthesized in situ

Enhancing strength-ductility synergy in nano-sized TiB 2 /Al composite via rapid solidification and thermo-mechanical processing

In-situ synthesis of Al2O3-reinforced high Nb–TiAl laminated composite with an enhanced strength-toughness performance

Enhanced mechanical properties of a novel heat resistant Al-based composite reinforced by the combination of nano-aluminides and submicron TiN particles

Microstructure and mechanical properties of an in-situ TiB2 particle reinforced AlSi10Mg composite additive manufactured by selective electron beam melting

Effect of Nano-Ti Particles on Microstructure and Mechanical Properties of Mg-3Al-1Zn Matrix Composites

A damage-tolerant Ti-rich multiphase metallic-glass composite with hierarchically heterogeneous architecture

Structure‐thermal activity relationship in a novel polymer/MOF‐based neutron‐shielding material

Enhanced high temperature mechanical properties and heat resistance of an Al–Cu–Mg–Fe–Ni matrix composite reinforced with in-situ TiB2 particles

Fabrication and characterization of novel high-efficiency and high-durability neutron-absorbing Ni-based alloys

An additively manufactured γ-based high Nb-TiAl composite via coherent interface regulation

Direct laser powder-bed fusion additive manufacturing of complex-shaped TiB 2 -B 4 C composite with ultra-fine eutectic microstructure and outstanding mechanical performances

Microstructural evolution during annealing of a powder metallurgical TiAl–Nb composite and its effect on mechanical properties

Engineering fine grains, dislocations and precipitates for enhancing the strength of TiB 2 -modified CoCrFeMnNi high-entropy alloy using Laser Powder Bed Fusion

Interfacial/intragranular reinforcement of titanium-matrix composites produced by a novel process involving core-shell structured powder

A bicomponent TiAl alloy with superior compressive strength-ductility synergy prepared by powder metallurgy