Abstract:The laser processing of polymer films has significant importance due to the wide applications in various fields. The problems in laser processing of transparent polymer films caused by the poor absorption and current doping methods have prevailed. In this paper, a simple, efficient, and low-cost doping and laser processing method based on polymers’ swelling and penetration behavior was applied to improve the laser processing of transparent polymer films: organic solvent assisted laser processing (SALP). In the SALP method, various common organic solvent molecules (Ethanol, Acetone, N, N-dimethylformamide, Chloroform) were introduced into transparent polydimethylsiloxane (PDMS) films through the swelling and penetration (SP) pretreatment and acted as the dopant to improve the efficiency, capability, and quality of laser processing. Experimental results showed that the SALP method performed higher efficiency and capability (kerf depth: 296.79 ± 11.98 μm, kerf width: 16.59 ± 1.46 μm, kerf aspect ratio: 18.02 ± 1.98) under the same processing conditions compared to the typical laser processing (TLP) method (kerf depth: 137.36 ± 6.47 μm, kerf width: 27.30 ± 1.11 μm, kerf aspect ratio: 5.04 ± 0.31). The roughness of the kerf inner surface and the debris and microcracks on the kerf surface were also significantly reduced. More importantly, this method hardly influenced the original properties of the native polymer films due to the removability of organic solvents. On the one hand, the introduction of organic solvent molecules improved the optical absorption of PDMS films and the heat transfer during laser processing. On the other hand, the excitation, ionization, and dissociation of organic solvent molecules under laser irradiation improved the decomposition process of PDMS, which improved photochemical reaction and promoted the complete and uniform decomposition in laser processing. The SALP method has enlightening significance for improving the laser processing of polymers and investigating the laser ablation mechanism.

Micro-Swelling and penetration assisted laser Processing: A doping and laser processing method for polydimethylsiloxane films based on swelling and penetration behavior

Organic solvent assisted laser processing of transparent polymer films based on the swelling and penetration behavior

Vapor-Phase Molecular Doping in Covalent Organosiloxane Network Thin Films Via a Lewis Acid-Base Interaction for Enhanced Mechanical Properties

Synthesis, characterization and lubricating effect of long chain branched polydimethylsiloxane-g-polyethylene copolymers

Ring-Opening Copolymerization of Mixed Cyclic Monomers: A Facile, Versatile and Structure-Controllable Approach to Preparing Poly(methylphenylsiloxane) with Enhanced Thermal Stability

Study on the ultraviolet nanosecond laser ablation and heat-affected zone of polydimethylsiloxane films based on comprehensive surface analysis

Preparation and characterization of thermo-responsive PDMS surfaces grafted with poly(N-isopropylacrylamide) by benzophenone-initiated photopolymerization.

Laser induced surface modification of polydimethylsiloxane as a super-hydrophobic material

Tuning the optical properties of polydimethylsiloxane films and fabricating elastic volume Bragg diffraction gratings by picosecond ultraviolet Laser-induced photochemical reactions

Hydrophilic PDMS with a Sandwich-Like Structure and No Loss of Mechanical Properties and Optical Transparency

Kinetic Feature of Hydroxy Terminated Polydimethylsiloxane Synthesis in One-step Process in the Presence of Small Amount of Water

Processing and Profile Control of Microhole Array for PDMS Mask with Femtosecond Laser

Precision cutting of PDMS film with UV-nanosecond laser based on heat generation-diffusion regulation

Modification and activation of the surface of medical-grade PDMS after irradiation by ultrashort laser pulses

Insight of organic molecule dissolution and diffusion in cross-linked polydimethylsiloxane using molecular simulation

Tailoring Dynamic Chains of Cross‐Linked PDMS to Hinder Oil Penetration

Solvent-tunable PDMS microlens fabricated by femtosecond laser direct writing

Synthesis and properties of thermoplastic and dissolvable polysiloxanes containing polyhedral oligomeric silsesquioxane

Complete inclusion of bioactive molecules and particles in polydime-thylsiloxane: a straightforward process under mild conditions

The role of segmental mixing on the mechanical properties and oxidative stability of polydimethylsiloxane-based polyetherurethane

Laser‐Assisted Direct Ink Writing for High‐Fidelity Fabrication of Elastomeric Complex Structures