Abstract:The Yb:fiber based high-power and high-energy ultrafast lasers usually feature central wavelength of 1030 nm instead of the more common one of 1064 nm, thus limiting some potential wavelength-dependent applications. In this work, a hectowatt 1064-nm femtosecond chirped pulse amplification (CPA) system based on double-stage rod-type photonic crystal fiber (PCF) amplifier was demonstrated, with a pulse energy of 212-μJ and a repetition rate of 0.5 MHz. Compared with our previous work [Opt. Express 30(6), 3611, 2022], two key measures were employed. Firstly, a Yb:YAG crystal was intentionally introduced as a spectral filter for avoiding 1030-nm amplified spontaneous emission (ASE) oscillation, which hence improved the signal-to-noise ratio (SNR) by 15 dB. Secondly, an additional stage of rod-type PCF amplifier was adopted for further power scaling, achieving an average power of 127 W. Finally, the pulse was compressed to ∼460 fs, with an average power of 106 W and a compression efficiency of ∼83%. The beam quality factors (M2) were measured to be M2 X = 1.12 and M2 Y = 1.09. To the best of our knowledge, this is the highest pulse energy among 1064-nm hectowatt-level femtosecond lasers, thus providing a high-quality source for wavelength-dependent applications. For example, it can be used as a driver for high-repetition-rate vacuum ultraviolet (VUV) sources about 10.5 eV, with an expected conversion efficiency of up to 1%.

500 W rod-type 4x4 multi-core ultrafast fiber laser

500 W rod-type 4 × 4 multicore ultrafast fiber laser

1 kW, 10 mJ, 120 fs coherently combined fiber CPA laser system

Fiber-solid, Hybrid, Single-Frequency Laser (100 W) with a 100 MHz Repetition Rate and 1 Ns Pulse Width from a Spherical Aberration Compensated Four-Stage Nd:YVO4 Amplifier

396 MHz CPA femtosecond laser system based on a single crystal fiber rod-type amplifier

High Energy, Monolithic Fiber Femtosecond Lasers

10-µJ-level femtosecond pulse generation in the erbium CPA fiber source with microstructured hollow-core fiber assisted delivery and nonlinear frequency conversion

260 fs, 403 W coherently combined fiber laser with precise high-order dispersion management

1kW 1mJ 8-channel ultrafast fiber laser

Coherently combined 16 channel multicore fiber laser system

High-average-power femtosecond laser at 258 nm

Coherent Beam Combination of Ultrafast Fiber Lasers

High-power 0.4-mJ picosecond CPA system based on an extra-large-mode-area triple-clad fiber

High-power ultrafast fiber laser systems

Old Wavelength, New Performance: Hectowatt 200-μJ-level Femtosecond fiber CPA System at 1064 Nm

High Energy and High Power Single Frequency 1572 nm Laser With an All-Fiber MOPA

High-Power GHz Burst-Mode All-Fiber Laser System with Sub 300 fs Pulse Duration

An efficient high-power femtosecond laser based on periodic-layered-Kerr media nonlinear compression and a Yb:YAG regenerative amplifier

44-fs, 1-MHz, 70-μJ Yb-doped fiber laser system for high harmonic generation

Sub-60-fs, Compact 1100-Nm Fiber Laser System Based on Double-Pass Pre-Chirp Managed Amplification.

112-Μj 180-Fs Pulses at 1-Khz Repetition Rate from Yb-Doped Laser Based on Strictly All-Fiber CPA Structure