Abstract:We propose and demonstrate a new approach to implement a wavelength-tunable ultrafast fiber laser source suitable for multiphoton microscopy. We employ fiber-optic nonlinearities to broaden a narrowband optical spectrum generated by an Yb-fiber laser system and then use optical bandpass filters to select the leftmost or rightmost spectral lobes from the broadened spectrum. Detailed numerical modeling shows that self-phase modulation dominates the spectral broadening, self-steepening tends to blue shift the broadened spectrum, and stimulated Raman scattering is minimal. We also find that optical wave breaking caused by fiber dispersion slows down the shift of the leftmost/rightmost spectral lobes and therefore limits the wavelength tuning range of the filtered spectra. We show both numerically and experimentally that shortening the fiber used for spectral broadening while increasing the input pulse energy can overcome this dispersion-induced limitation; as a result, the filtered spectral lobes have higher power, constituting a powerful and practical approach for energy scaling the resulting femtosecond sources. We use two commercially available photonic crystal fibers to verify the simulation results. More specific, use of 20-mm fiber NL-1050-ZERO-2 enables us to implement an Yb-fiber laser based ultrafast source, delivering femtosecond (70-120 fs) pulses tunable from 825 nm to 1210 nm with > 1 nJ pulse energy. (C) 2016 Optical Society of America

500 W rod-type 4 × 4 multicore ultrafast fiber laser

500 W rod-type 4x4 multi-core ultrafast fiber laser

1 kW, 10 mJ, 120 fs coherently combined fiber CPA laser system

Fiber-solid, Hybrid, Single-Frequency Laser (100 W) with a 100 MHz Repetition Rate and 1 Ns Pulse Width from a Spherical Aberration Compensated Four-Stage Nd:YVO4 Amplifier

1kW 1mJ 8-channel ultrafast fiber laser

High-average-power femtosecond laser at 258 nm

Coherently combined 16 channel multicore fiber laser system

260 fs, 403 W coherently combined fiber laser with precise high-order dispersion management

Coherent Beam Combination of Ultrafast Fiber Lasers

High Energy, Monolithic Fiber Femtosecond Lasers

High-power ultrafast fiber laser systems

Old Wavelength, New Performance: Hectowatt 200-μJ-level Femtosecond fiber CPA System at 1064 Nm

Sub-60-fs, Compact 1100-Nm Fiber Laser System Based on Double-Pass Pre-Chirp Managed Amplification.

Multidimensional coherent pulse addition of ultrashort laser pulses

High Energy and High Power Single Frequency 1572 nm Laser With an All-Fiber MOPA

High-Power GHz Burst-Mode All-Fiber Laser System with Sub 300 fs Pulse Duration

396 MHz CPA femtosecond laser system based on a single crystal fiber rod-type amplifier

On-target delivery of intense ultrafast laser pulses through hollow-core anti-resonant fibers

High-energy 100-ns single-frequency all-fiber laser at 1064 nm

An efficient high-power femtosecond laser based on periodic-layered-Kerr media nonlinear compression and a Yb:YAG regenerative amplifier

Self-phase modulation enabled, wavelength-tunable ultrafast fiber laser sources: an energy scalable approach.