Abstract:Grain refinement strongly strengthens the non‐basal slip of Bi2Te3‐based thermoelectric material, and then increase the carrier concentration, hindering the practical preparation of n‐type Bi2Te3 by ball milling method. In this work, enhancing the ball milling energy can facilitate the recovery effect during hot pressing, which can reduce and stabilize the carrier concentration and achieve high thermoelectric and mechanical performances. The carrier concentration in n‐type layered Bi2Te3‐based thermoelectric (TE) material is significantly impacted by the donor‐like effect, which would be further intensified by the nonbasal slip during grain refinement of crushing, milling, and deformation, inducing a big challenge to improve its TE performance and mechanical property simultaneously. In this work, high‐energy refinement and hot‐pressing are used to stabilize the carrier concentration due to the facilitated recovery of cation and anion vacancies. Based on this, combined with SbI3 doping and hot deformation, the optimized carrier concentration and high texture degree are simultaneously realized. As a result, a peak figure of merit (zT) of 1.14 at 323 K for Bi2Te2.7Se0.3 + 0.05 wt.% SbI3 sample with the high bending strength of 100 Mpa is obtained. Furthermore, a 31‐couple thermoelectric cooling device consisted of n‐type Bi2Te2.7Se0.3 + 0.05 wt.% SbI3 and commercial p‐type Bi0.5Sb1.5Te3 legs is fabricated, which generates the large maximum temperature difference (ΔTmax) of 85 K at a hot‐side temperature of 343 K. Thus, the discovery of recovery effect in high energy refinement and hot‐pressing has significant implications for improving TE performance and mechanical strength of n‐type Bi2Te3, thereby promoting its applications in harsh conditions.

High-pressure induces topology boosting thermoelectric performance of Bi2Te3

Improving thermoelectric properties of Bi2Te3 by straining under high pressure: Experiment and DFT calculation

Electronic Topological Transition As a Route to Improve Thermoelectric Performance in Bi0.5 Sb1.5 Te3.

High performance of Bi2Te3-based thermoelectric generator owing to pressure in fabrication process

Thermoelectric transport properties and crystal growth of BiSbTe 3 bulk materials produced by a unique high-pressure synthesis

Origin of the High Performance in GeTe-Based Thermoelectric Materials Upon Bi2Te3 Doping

Evolution of Thermoelectric Properties and Anisotropic Features of Bi2te3 Prepared by High Pressure and High Temperature

Band Structure Manipulated by High Pressure-Assisted Te Doping Realizing Improvement in Thermoelectric Performance of BiCuSeO System

Pressure-induced anomalies in structure, charge density and transport properties of Bi 2 Te 3 : A first principles study

Modulation of Vacancy Defects and Texture for High Performance n‐Type Bi2Te3 via High Energy Refinement

Chemical Pressure-Driven Band Convergence and Discordant Atoms Intensify Phonon Scattering Leading to High Thermoelectric Performance in SnTe

Lattice Strain Enhances Thermoelectric Properties in Sb2Te3/Te Heterostructure

Modulation of Vacancy Defects and Texture for High Performance N-Type Bi2 Te3 Via High Energy Refinement.

Chemical Pressure‐Induced Unconventional Band Convergence Leads to High Thermoelectric Performance in SnTe

Pressure-induced Enhancement of Thermoelectric Performance in Palladium Sulfide

Thermoelectric properties of nonstoichiometric PbTe prepared by HPHT

Room‐Temperature High‐Performance Thermoelectric Bi0.6Sb0.4Te: Elimination of Detrimental Band Inversion in BiTe

Enhanced Thermoelectric Performance in N-Type Bi2te2.95se0.05 Bulks Fabricated by High Pressure Sintering Technique

Tuning the Saturated Vapor Pressure of Solvothermal Synthesis to Boost the Thermoelectric Performance of Pristine Bi 2 Te 3 Polycrystals by Anisotropy Strengthening

Unraveling electronic origins for boosting thermoelectric performance of p-type (Bi,Sb) 2 Te 3

Enhanced Thermoelectric Performance of N-Type Bi2(Se, Te)3 Bulk Nanocomposites Through Ti Doping