Abstract:Understanding laser interaction with metal powder beds is critical in predicting optimum processing regimes in laser powder-bed fusion (PBF) additive manufacturing (AM) of metals. In this work, we study the denudation of metal powders that is observed near the laser scan path as a function of laser parameters and ambient gas pressure. We show that the observed depletion of metal powder particles in the zone immediately surrounding the solidified track is due to a competition between outward metal vapor flux directed away from the laser spot and entrainment of powder particles in a shear flow of gas driven by a metal vapor jet at the melt track. Between atmospheric pressure and ~10 Torr of Ar gas, the denuded zone width increases with decreasing ambient gas pressure and is dominated by entrainment from inward gas flow. The denuded zone then decreases from 10 to 2.2 Torr reaching a minimum before increasing again from 2.2 to 0.5 Torr where metal vapor flux and expansion from the melt pool dominates. The dynamics of the denudation process were captured using high-speed imaging, revealing that the particle movement is a complex interplay among melt-pool geometry, metal vapor flow, and ambient gas pressure. The experimental results are rationalized through FE simulations of the melt-track formation and resulting vapor flow patterns. The results presented here represent new insights to denudation and melt-track formation that can be important for the prediction and minimization of void defects and surface roughness in additively manufactured metal components. The dynamics of the denudation process were captured using high-speed imaging, revealing that the particle movement is a complex interplay among melt-pool geometry, metal vapor flow, and ambient gas pressure. Understanding laser interaction with metal powder beds is critical in predicting optimum processing regimes in laser powder-bed fusion additive manufacturing of metals. Laser powder-bed fusion of metal powders is currently the dominant method for producing 3D-printed metal structures. Very rapid heating of the powder results in thermal expansion of the powder with high velocity and can produce lateral particle motion. The vapor flow induces an inward ambient gas flow that entrains particles and results in the denudation zone. Several complex processes influence the interaction of the rapidly formed melt pool and the surrounding particles. The particles are initially slightly displaced from the centerline, so as to put in evidence the particle motion as a result of a lateral force.

CFD and ray tracing analysis of a discrete nozzle for laser metal deposition

Nonlinear thermal simulation of laser metal deposition

Coupled Computational Fluid Dynamics-Discrete Element Method Model for Investigation of Powder Effects in Nonconventional Laser Powder Bed Fusion Process

Adaptive powder nozzle setup for enhanced efficiency in laser metal deposition

Mesoscopic Computational Fluid Dynamics Modelling for the Laser-Melting Deposition of AISI 304 Stainless Steel Single Tracks with Experimental Correlation: A Novel Study

Coupling Characteristics of Powder and Laser of Coaxial Cone Nozzle for Laser Direct Metal Deposition: Numerical Simulation and Experimental Study

Numerical Study on Powder Stream Characteristics of Coaxial Laser Metal Deposition Nozzle

Powder catchment in laser metal deposition

CFD modelling of the powder segregation in multi-material laser directed energy deposition

Laser powder-bed fusion additive manufacturing: physics of complex melt flow and formation mechanisms of pores, spatter and denudation zones

Fluid and particle dynamics in laser powder bed fusion

Model Development in OpenFOAM for Laser Metal Deposition-based Additive Manufacturing Process

Powder flow simulation of a ring-type coaxial nozzle and cladding experiment in laser metal deposition

Energy Coupling Mechanisms and Scaling Behavior Associated with Laser Powder Bed Fusion Additive Manufacturing

Computational Study of Transport Phenomena in Laser Melting-Based Metal Additive Manufacturing

Experimental Quantification of Inward Marangoni Convection and Its Impact on Keyhole Threshold in Laser Powder Bed Fusion of Stainless Steel

Denudation of metal powder layers in laser powder-bed fusion processes

Laser additive manufacturing of a 316L/CuSn10 multimaterial coaxial nozzle to alleviate spattering adhesion and burning effect in directed energy deposition

An analytical model of energy distribution in laser direct metal deposition

Modeling of Temperature Field Evolution During Multilayered Direct Laser Metal Deposition

Investigation of thermal behavior of powder stream and molten pool during laser-based directed energy deposition