Abstract:Understanding laser interaction with metal powder beds is critical in predicting optimum processing regimes in laser powder-bed fusion (PBF) additive manufacturing (AM) of metals. In this work, we study the denudation of metal powders that is observed near the laser scan path as a function of laser parameters and ambient gas pressure. We show that the observed depletion of metal powder particles in the zone immediately surrounding the solidified track is due to a competition between outward metal vapor flux directed away from the laser spot and entrainment of powder particles in a shear flow of gas driven by a metal vapor jet at the melt track. Between atmospheric pressure and ~10 Torr of Ar gas, the denuded zone width increases with decreasing ambient gas pressure and is dominated by entrainment from inward gas flow. The denuded zone then decreases from 10 to 2.2 Torr reaching a minimum before increasing again from 2.2 to 0.5 Torr where metal vapor flux and expansion from the melt pool dominates. The dynamics of the denudation process were captured using high-speed imaging, revealing that the particle movement is a complex interplay among melt-pool geometry, metal vapor flow, and ambient gas pressure. The experimental results are rationalized through FE simulations of the melt-track formation and resulting vapor flow patterns. The results presented here represent new insights to denudation and melt-track formation that can be important for the prediction and minimization of void defects and surface roughness in additively manufactured metal components. The dynamics of the denudation process were captured using high-speed imaging, revealing that the particle movement is a complex interplay among melt-pool geometry, metal vapor flow, and ambient gas pressure. Understanding laser interaction with metal powder beds is critical in predicting optimum processing regimes in laser powder-bed fusion additive manufacturing of metals. Laser powder-bed fusion of metal powders is currently the dominant method for producing 3D-printed metal structures. Very rapid heating of the powder results in thermal expansion of the powder with high velocity and can produce lateral particle motion. The vapor flow induces an inward ambient gas flow that entrains particles and results in the denudation zone. Several complex processes influence the interaction of the rapidly formed melt pool and the surrounding particles. The particles are initially slightly displaced from the centerline, so as to put in evidence the particle motion as a result of a lateral force.

Powder catchment in laser metal deposition

Adaptive powder nozzle setup for enhanced efficiency in laser metal deposition

Interplay between powder catchment efficiency and layer height in self-stabilized laser metal deposition

CFD and ray tracing analysis of a discrete nozzle for laser metal deposition

Coupling Characteristics of Powder and Laser of Coaxial Cone Nozzle for Laser Direct Metal Deposition: Numerical Simulation and Experimental Study

Study of process window development for high deposition-rate laser material deposition by using mixed processing parameters

Denudation of metal powder layers in laser powder-bed fusion processes

Analysis of the Machining Process of Inconel 718 Parts Manufactured by Laser Metal Deposition

Investigating particle morphology, quality, flowability and performance of abrasive-grinding based powders for directed energy deposition

Laser powder-bed fusion additive manufacturing: physics of complex melt flow and formation mechanisms of pores, spatter and denudation zones

Hybrid Analytical-Numerical Modeling of Surface Geometry Evolution and Deposition Integrity in a Multi-Track Laser-Directed Energy Deposition Process

Dynamics of the laser–powder interaction in the Ti6Al4V powder feeding process of laser-directed energy deposition additive manufacturing

Prediction of deposit characteristics based on the discrete coaxial nozzle during laser direct metal deposition

Influence of the laser-beam intensity distribution on the performance of directed energy deposition of an axially fed metal powder

Coupled Computational Fluid Dynamics-Discrete Element Method Model for Investigation of Powder Effects in Nonconventional Laser Powder Bed Fusion Process

Laser direct metal deposition of variable width thin-walled structures in Inconel 718 alloy by coaxial powder feeding

Computational Study of Transport Phenomena in Laser Melting-Based Metal Additive Manufacturing

Influence of Process Parameters and Deposition Strategy on Laser Metal Deposition of 316L Powder

On the role of energy input in the surface morphology and microstructure during selective laser melting of Inconel 718 alloy

Determining the Effects of Inter-Layer Time Interval in Powder-Fed Laser-Directed Energy Deposition on the Microstructure of Inconel 718 via In Situ Thermal Monitoring

Laser Metal Deposition of TiC/Inconel 718 Composites with Tailored Interfacial Microstructures