Optimization and screening of process parameters for the robust co-pyrolytic study of waste motor oil and rice stubble toward sustainable waste-to-fuel generation

Asmita Mishra,B.C. Meikap

DOI: https://doi.org/10.1016/j.chemosphere.2024.141450

IF: 8.8

2024-02-22

Chemosphere

Abstract:The current study explores the co-pyrolysis of waste motor oil (WMO) and rice stubble in a designed lab-scale pyrolyzer to produce alternative energy fuels. The parameter screening was followed by optimization utilizing the Box-Behnken design (BBD). Reactor temperature (T R ), mixing ratio (M), and holding time (t) affected the co-pyro-oil yield substantially. A maximum co-pyro-oil yield of 90.3% was achieved at a T R = 485 °C, t = 12.5 min, and M = 5% rice stubble to waste motor oil, which was further characterized and compared with the commercial diesel fuel properties. The highest research octane number of 76.15 was obtained for the co-pyro-oil (Co-PO), followed by the pyro-oil generated from only waste motor oil (PO WMO ). Consequently, the paraffin content increased to 64.34 wt% from 27.66 wt % for PO RS . The carbon number varied from C 7 –C 17 for PO WMO and Co–Po, aligning with the diesel fuel requirements. Furthermore, a substantial enrichment in the physio-chemical properties of the produced Co-PO with reduced moisture content and enhancement in higher heating value (HHV) was also noticed. Hence, the generated Co-PO could be utilized as transport-grade fuel.

environmental sciences