Abstract:Renewable lignocellulosic biomass is a favorable energy resource since its co-pyrolysis with hydrogen-rich plastics can produce high-yield and high-quality biofuel. In contrast to earlier co-pyrolysis research that concentrated on increasing product yield, this study comprehends the synergistic effects of two distinct feedstocks that were not considered earlier. This work focuses on co-pyrolyzing wheat straw (WS) with non-reusable polyethylene terephthalate (PET) for the production of pyrolysis oil. WS and PET were blended in different ratios (100/0, 80/20, 60/40, 40/60, 20/80, and 0/100), and pyrolysis experiments were conducted in a fixed-bed reactor under different temperatures to assess their synergistic effect on oil yield. Synergy rates of up to 7.78 % were achieved on yield for the blends of plastic and biomass at a temperature of 500 °C. In comparison to individual biomass or plastics, co-pyrolyzing PET-biomass blends demonstrated good process interaction and promoted the yields of value-added products. The heating value of the pyrolysis oils was in the range of 16.45-28.64 MJ/kg, which depends on the amount of plastic present in the feedstock. The physical analysis of the oils shows that they can be used for heat production by direct combustion in boilers or furnaces. The correlation between WS and PET was validated with the aid of Fourier transform infrared spectroscopy (FT-IR) and gas chromatography-mass spectrometry (GC-MS) analysis. The GC-MS result demonstrated the presence of different compounds such as O-H compounds, esters, carbonyl group elements, acids, hydrocarbons, aromatics, and nitrogenated compounds in the pyrolysis oil, which differed based on the proportions of PET in the feedstock. The increased hydrocarbon and reduced oxygen percentages in the pyrolysis oil were implicitly caused by enhanced hydrocarbon pool mechanisms, in which the breakdown of PET may be supplied as a hydrogen donor. Overall, waste lignocellulosic biomass and plastics can be used to produce biofuels, which helps reduce the amount of solid waste that ends up in landfills. This study also revealed that future research should be focused on the reaction mechanisms of WS and PET co-pyrolysis in order to examine the synergistic interactions.

Influence of Co-Pyrolysis of Waste Tetra Pak with Waste Motor Oil on Product Distribution and Properties for Fuel Application

Co-Pyrolysis of walnut shell and waste tire with a focus on bio-oil yield quantity and quality

Optimization and screening of process parameters for the robust co-pyrolytic study of waste motor oil and rice stubble toward sustainable waste-to-fuel generation

Co-pyrolysis Characteristics and Synergistic Interaction of Waste Polyethylene Terephthalate and Woody Biomass towards Bio-Oil Production

Production of diesel-like fuel by catalytic co-pyrolysis of waste cooking oil and waste lubricating oil—an alternate energy source

Pyrolysis behaviour and synergistic effect in co-pyrolysis of wheat straw and polyethylene terephthalate: A study on product distribution and oil characterization

Co-pyrolysis of furniture wood with mixed plastics and waste tyres: assessment of synergistic effect on biofuel yield and product characterization under different blend ratio

Co-pyrolysis of Corn Stover and Waste Tire: Pyrolysis Behavior and Kinetic Study Based on Fraser-Suzuki Deconvolution Procedure

Synthesis of diesel‐like fuels using waste cooking oil and waste polyethylene via Co‐pyrolysis process

Co-pyrolysis behavior, engine performance characteristics, and thermodynamics of liquid fuels from mahua seeds and waste thermocol: A comprehensive study

Synergistic effect on thermal behavior and product characteristics during co-pyrolysis of biomass and waste tire: Influence of biomass species and waste blending ratios

Co-pyrolysis characteristic of sugarcane waste with polyethylene terephthalate: thermal decomposition, product distribution, synergistic effect, and kinetics analysis

Co-pyrolysis of de-oiled microalgal biomass residue and waste tires: Deeper insights from thermal kinetics, behaviors, drivers, bio-oils, bio-chars, and in-situ evolved gases analyses

Characteristics, kinetics, infrared analysis and process optimization of co-pyrolysis of waste tires and oily sludge

Enhanced Yield and Production of Aromatics Rich Fractions in Bio-Oil through Co-Pyrolysis of Waste Biomass and Plastics

A comparative study on co-pyrolysis of lignocellulosic biomass with polyethylene terephthalate, polystyrene, and polyvinyl chloride: Synergistic effects and product characteristics

Mechanistic insights into co-pyrolysis of waste tires and waste lubricating oil: Kinetics and thermal behavior study

Catalytic Pyrolysis of Biomass and Polymer Wastes

Non-isothermal conversion of wheat husk and low-density polyethylene for energy dense fuel production

Synergistic Effects on Char and Oil Produced by the Co-Pyrolysis of Pine Wood, Polyethylene and Polyvinyl Chloride

Enhanced biofuel production by co-pyrolysis of distiller's grains and waste plastics: A quantitative appraisal of kinetic behaviors and product characteristics