Enhanced Yield and Production of Aromatics Rich Fractions in Bio-Oil through Co-Pyrolysis of Waste Biomass and Plastics

Ekta Chaturvedi,Poulomi Roy,Rakesh Upadhyay,Palash Chowdhury
DOI: https://doi.org/10.1016/j.jaap.2024.106379
IF: 6
2024-01-29
Journal of Analytical and Applied Pyrolysis
Abstract:Recently, co-pyrolysis has emerged as an efficient technique for upgrading of oil products obtained from pyrolysis of biomass materials. Current study focuses on the quantity and quality enhancement of oil derived from pyrolysis of waste leaves (WL) of Shorea Robusta species and rice husk (RH) samples. Co-pyrolysis was performed with polypropylene (PP) and polystyrene (PS) at feed ratios varying from 2:1 to 1:2 at optimized temperature of 550°C to investigate the changes occur during co-pyrolysis. CHNS and TGA analysis was performed to obtain the elemental composition and decomposition temperature ranges of selected feed materials. GC-MS analysis preceded by distillation was performed to observe the qualitative changes in the oil fractions after co-pyrolysis. Initially pyrolysis of rice husk and waste leaves resulted in major fraction of solid char products whereas co-pyrolysis with PS and PP produced oils as dominant fractions among all solid, char and gaseous products. Maximum oil yield of 75% and 69.9% was obtained in rice husk and waste leaves respectively with polystyrene which were initially 36% and 17% during pyrolysis which means around 1.8- and 3-fold increment in bio-oil yield was observed with significant higher fractions of aromatics in it than the oil obtained from pyrolysis of rice husk and waste leaves respectively. Polystyrene provided good synergistic effect and performed better than polypropylene with both biomass wastes during co-pyrolysis. Overall, use of co-pyrolysis significantly upgraded the quality and quantity of bio-oil and increased its stability for storage which is difficult to maintain in pyrolysis only.
engineering, chemical,chemistry, analytical,energy & fuels
What problem does this paper attempt to address?