Abstract:The objective of this study is to assess the suitability of pyrolysis oils produced from organic and plastic wastes for engine application. The assessment was performed by comparing the properties of the obtained pyrolysis oils with those of standard engine fuel. A fast pyrolysis process with an auger reactor was used to convert organic wastes such as beauty leaf fruit husk (BLFH), macadamia nutshell (MNS), and municipal green waste (MGW), and plastic waste such as waste high-density polythene (HDPE) into oil. Prior to pyrolysis experiments, all the wastes were characterized using a thermogravimetric and a CHNS analyser to perform proximate and ultimate analyses. The experiments were performed using varied temperatures ranging from 400 °C to 550 °C at intervals of 25 °C, a 3-minute residence time and 2-mm feedstock particle size. The maximum yield of pyrolysis oil was obtained at 475 °C for BLFH (42.75 %), at 500 °C for MNS (45.09 %) and MGW (44.72 %) and at 525 °C for HDPE (61.29 %). The chemical and physical properties of the pyrolysis oils were analysed using Fourier transform infrared spectroscopy (FTIR), Gas chromatography–mass spectrometry (GC–MS), elemental and physicochemical properties analysis. The characterisation results reveal that the pyrolysis oils obtained from BLFH, MNS and MGW are enriched with phenolic, aromatic, and oxygenated compounds and oil obtained from HDPE contains mostly hydrocarbons and aromatics. The BLFH, MNS and MGW derived oils have higher viscosity and density and lower calorific value compared to that of HDPE derived oil. Due to these features, the oils obtained from organic wastes are not suitable for engine application without further refinement. HDPE derived oil, on the other hand, meets most of the criteria to be an engine fuel. However, a firm conclusion cannot be drawn until this oil has been tested in an engine.

Catalytic co-pyrolysis of Vachellia Farnesiana with polypropylene plastic to produce bio-oil: Parameter optimization study

OPTIMIZATION OF NATURAL CATALYSTS IN OIL PRODUCTION FROM PLASTIC WASTE PYROLYSIS

Enhanced Oil Yield by Catalytic Pyrolysis of Thermoplastics Using Cost-Effective Spent FCC and BaCO3 and Its Valorization to Gasoline and Diesel Grade Fuel via Fractionation

Enhanced Yield and Production of Aromatics Rich Fractions in Bio-Oil through Co-Pyrolysis of Waste Biomass and Plastics

Optimisation of Process Parameters to Maximise the Oil Yield from Pyrolysis of Mixed Waste Plastics

Enhancement of fuel-grade oil yields from thermal pyrolysis of polyethylene and polystyrene through reflux condenser assisted autoclave reactor

Catalytic Pyrolysis of Plastic Waste: Moving Toward Pyrolysis Based Biorefineries

Plastic waste to liquid oil through catalytic pyrolysis using natural and synthetic zeolite catalysts

Characterization of pyrolysis oil produced from organic and plastic wastes using an auger reactor

Effective deoxygenation for the production of liquid biofuels via microwave assisted co-pyrolysis of agro residues and waste plastics combined with catalytic upgradation

Optimization of the process parameters of catalytic plastic pyrolysis for oil production using design of experiment approaches: A review

Drop-in fuel production with plastic waste pyrolysis oil over catalytic separation

Biomass:polystyrene co-pyrolysis coupled with metal-modified zeolite catalysis for liquid fuel and chemical production

Hydrocarbon selectivity enhancement through catalytic fast co-pyrolysis of almond shell and plastic blends

Influence of banana peel waste biomass ratio in Co-pyrolysis of waste plastics to regulate aromatic content and oxygenated compounds: A study of liquid product characterization and its CI engine performance

Customized Atmospheric Catalytic Hydropyrolysis of Biomass to High-Quality Bio-Oil Suitable for Coprocessing in Refining Units

A lab scale waste to energy conversion study for pyrolysis of plastic with and without catalyst: Engine emissions testing study

Experimental investigation on slow thermal pyrolysis of real-world plastic wastes in a fixed bed reactor to obtain aromatic rich fuel grade liquid oil

Investigation of a Ni-Modified MCM-41 Catalyst for the Reduction of Oxygenates and Carbon Deposits during the Co-Pyrolysis of Cellulose and Polypropylene

Response Surface Methodology for the Synthesis and Characterization of Bio-Oil Extracted from Biomass Waste and Upgradation Using the Rice Husk Ash Catalyst

Synergistic Effects of Fe@C Catalysts Prepared at Different Carbonization Temperatures on Microwave Co-Pyrolysis of Biomass and Plastic for High-Value Oil and Gas Production